Search results

  1. B

    H&R Springs

    Convertible springs typically have different rates for the rear, so you shouldnt do those. Also if you go deeper than 1.5" you should get struts and shocks. Eibach offers a pro kit for SN's 3510.140 but the pro system is a better choice 3510.780 and either way you will need c/c plates, I...
  2. B

    NEED ADVICE FOR MY 95 STANG GT!!!

    Do the x or y with a good exhaust. See your other post, 35 different opinions on exhaust? thats all you'll find here, opinions, but you gotta come up with your own, keep doing the research and find the setup you like. Once you get done with that, do the gears. Big difference that will not...
  3. B

    What exhaust should i put on my 95 GT

    I went 3.73, if you dont drive daily you could go 4.10, and if you spend a lot of time on the freeway the 3.55 is a little more conservative. They will not add any horsepower, but they will get you up to speed much faster. You will for sure feel the difference, your factory ratio is 2.73...
  4. B

    E-brake cable vs. Driveshaft

    Hey all, put the car up on the rack this morning to install some new stuff and re-install the swaybar that I had removed, and to check out this noise I'm getting in slow speed turns, rubbing sound, it goes away as soon as it straightens out. I found the new FMS driveshaft is being machined by...
  5. B

    Strut and C/C plates swap

    I had the same issue with my car, when I bought it it had these saleen camber/caster plates, they have these little bushings in there that made a racket. The only way I could duplicate what I was hearing on the freeway was hitting the top of the strut with a rubber mallet. I took the saleens...
  6. B

    which cam

    If you're gonna run a motorsport cam use the E303, not the B. The E is pretty lopey as it is, the B will have some pretty serious idle issues without some good tuning. The steeda 19 is pretty conservative and should work great, good idle quality and driveability w/o tuning and it will probably...
  7. B

    Valve spring help

    The part number on your cam is: 31-246-3, that cam is a horrible choice for a 5.0, unless youre working on something much older its a bad choice. If youre gonna run that you need to change the pushrods and lifters too. If you're really planning on installing that into an SN, send that thing...
  8. B

    Dyno Day

    Mainly advertised for diesel trucks, but if you've got a high powered stang and want to run they wont turn you down: Special Events :SNSign:
  9. B

    miles

    125!
  10. B

    So Cal Dyno

    4 Wheel Parts in Temecula is running a dyno day on Saturday November 11th for all those local residents that wanna run on a chassis dyno. Its a moblie 1200 HP 200 MPH Dyno Jet. Theyre getting $50 for pre registration max of 30 vehicles, then if there is time left in the day, they will charge...
  11. B

    H-Pipes Mac or BBK

    Those items are both the same. Standard H pipe design and there are only so many ways you can bend pipe. If you want something that will produce a unique sound save some cash and get this Mac Pro Chamber...
  12. B

    Wheel Fit Question

    08'S run a different offset I think. I borrowed a set of factory 08 GT wheels to put on mine after I sold the stock ones cause I was still waiting on the new ones, they looked retarded. maybe if you run a 1/4" spacer up front and like a 2.5" spacer out back. Rear wheel was way under there...
  13. B

    Running hot when AC on/ Oil pressure always high.

    My car does this same thing, the temp anyways, but I have mechanical gauges, so I have a question to add, how hot is too hot? I hooked up the switches for the high and low speed fans (awesome info) and its got a 180 stat, so around town even with AC it stays below 215, 210-215 on the freeway...
  14. B

    Running hot when AC on/ Oil pressure always high.

    My car does this same thing, the temp anyways, but I have mechanical gauges, so I have a question to add, how hot is too hot? I hooked up the switches for the high and low speed fans (awesome info) and its got a 180 stat, so around town even with AC it stays below 215, 210-215 on the freeway...
  15. B

    Optima Red Battery Issue..Anyone Else?

    my place carries those, we havent had any issues. 8004-003 is our most popular part number, we sell 8-10 a month. If the place you purchased from doesnt move them or if they dont rotate the stock, then you might have gotton an old one. You should always check the date code of a battery before...
  16. B

    Front Sway Bar End links and Bushings???

    Energy suspension 9.8124R (red) or 9.8124G (black) new links, with new poly bushings. should be about $15-20.
  17. B

    What should a gear swap cost???

    Well, I wouldnt say dummy, you would be surprised at how many people have no idea what is happening in there. To answer your question, basically yes, everything comes apart again, but, since you're only changing the carrier, none of the shims change, when you remove the carrier, as long as the...
  18. B

    What should a gear swap cost???

    Yes, $95 an hour sounds like a dealer rate, or somebody who is particularly proud of his/her work.
  19. B

    What should a gear swap cost???

    Good call. And if you've got some healthy mods planned for the future do the 31 spline upgrade, the axles are pretty inexpensive from superior ($275) and carriers are available from many manufacturers like eaton, auburn, or even the factory Cobra is 31 spline. Plus install of these items does...
  20. B

    What should a gear swap cost???

    I work for a shop that does gear installs, the #1 most important thing you can do is find a quality place to get the work done. You dont want to find out you went to the wrong place, because that will most likely happen on the side of the road somewhere. So shop for price but also see if you...
Top Bottom
Back
Forums
Menu