Search results

  1. 67coupestang

    Post Pictures of your Classic (pics only)

    heres my 3 babies. the 76 bronco is in the background there
  2. 67coupestang

    small air cleaner???

    i rember that same article. they also claimed that not running an air filter made the worst HP. the speculated exactly what Hungrymonkey said. the base helped funnel the air in and reduced turbulance. I dont rember what they used for a test motor, but i dont think it was anything big. and...
  3. 67coupestang

    Stalling and oil pressure problem

    my bronco did the same thing oil pressure was fine at start-up and around 40psi when on the highway but would bottom out at idle. and it never knocked... tore it apart and all the crank bearings were shot and it needed to have the crank turned. as a side note dont buy a oil pump from an...
  4. 67coupestang

    See my stang here

    Great car. I think the rims and tires give it a nice sleeper look too bad they dont come in a 16... But i also second the motion to ditch the drums...
  5. 67coupestang

    How to 67 headlight switch removal

    there is a button on the flat part of the switch opposite the wiring plug behind the dash. Push it then just slide the whole shaft and knob out.
  6. 67coupestang

    66 t-5 gears and rear end??

    i have the tremec with a 3.35 first gear and I love my 3.50s good first gear and still great manners @ 80mph. I'm running 225/50/16's
  7. 67coupestang

    351w swap, water pump/radiator ?'s...

    mustangs plus also sells a solid pipe bent to replace your long lower hose. its item# 10139 in the catalog but it doesnt look like its online.
  8. 67coupestang

    Fuel problem

    it would slide in to position too easy.
  9. 67coupestang

    Removing leaf springs

    i used a sawzall too pita just take ur time and be patient. and i too feel the pain, i was trying to crack the bolt with a chisel and i missed the chisel and wound up fracturing my hand with the hammer. it still hurts :( LOL
  10. 67coupestang

    85ish upohlstery question.

    I have a pair of 85 gt seats that im trying to take the cloth off to remove the headrest and have them recovered, but i cant get them to slip off for the life of me. does anyone know where i could get directions or a write up? and also where can i get new cloth? TIA!!!
  11. 67coupestang

    67 and 68 fenders

    i bought a 68 door for my 67 and the inside was a little different too, no big deal but the provisions for the arm rest were different. I think the armrest for the 68 is longer
  12. 67coupestang

    '73 Question . . .

    my buddy was parting out a 73 grande, just like yours it sounds. 351C auto (which is probably an AMX btw). I snagged the discs and the 9" rear from it. I remember finding a lot of rust tearing the car apart. in different spots than my 67. He always complained that parts were so much harder...
  13. 67coupestang

    Has anyone heard of swapping Explorer rear disc brakes onto a 9"?

    okay i measured the backing plate bolt pattern and its the same as whats on my '73 9" the flange on the 73 axles is smaller than the opening in the expo disc. I didnt get to measure the distance between the axle flange and the face of the axle on the explorer. I see kits all the time on...
  14. 67coupestang

    Has anyone heard of swapping Explorer rear disc brakes onto a 9"?

    so what was the concensus on weither or not the expo brakes will mate to the early 9"s?? I have a 98 v8 expo in the drive and after I get the rear end (`73 9") out of my 67 tomarrow, I may tear apart my explorer to find out.
  15. 67coupestang

    Minnesota Mustangs –sunday- Sunday- Sunday

    hayward mn. its a bar a grain elevator and like 20 houses. :) takes about 20 minutes for the sheriff to show up, not that id know that for any particular reason...
  16. 67coupestang

    Minnesota Mustangs –sunday- Sunday- Sunday

    Man i wish i would have known that before i tore the rear end out :( 19stang66, you and i probably could have traveled together. im straight west of you by austin
  17. 67coupestang

    EFI swap question

    you could snag the inertia switch and plug just for $h*ts and giggles. I wouldnt run an efi car without one, saftey first :P
  18. 67coupestang

    Overheating. need bigger radiator?

    is your hose colapsing at RPM?? by the way if you do get a new rad, may i suggest a universal aluminum? if you dont mind building some custom brackets its a helluva lot cheaper, I picked mine up for like $160 and another $10 in aluminum pieces that i bent in a vise. I havent seen my temp...
  19. 67coupestang

    No front brakes!

    got me thinking about mine. so i cracked open the prop valve, sure enough the rod had traveled all the way towards the "front" end, severly limiting the pressure applied to the front brakes. I havent re-bleed the front yet but already I can tell a huge difference.
  20. 67coupestang

    The Reenmachine DOHC '67 Shelby Clone Convertible Progress

    go knock on the biggest da#@ piece of wood you can find right NOW!!!
Top Bottom
Back
Forums
Menu