Search results

  1. 9

    Truck lower the same as systemmax

    I did not think they were the same but friend thought they were I just happened to have one laying around so I figured I would look into .Thanks for the replies
  2. 9

    Truck lower the same as systemmax

    I have a truck lower and I was wondering if it is the same as the systemmax lower because it looks very similar.
  3. 9

    What RPM do you laucn your drag radials at???

    I drop mine at about 4500 with 15psi and a nice second gear burnout till I feel them start to slow the engine down a little and dump it and get 1.7-1.8 all day
  4. 9

    Another question about brakes

    You could always get cobra space safer spares that will fit over the brakes.Also the bare brake kit is virtually the smae brakes that come on the cobras so it would be cheaper to put together the cobra brakes it cost me a little over a grand .The front calipers are exactly the same they are made...
  5. 9

    Albany New York

    I hear ya trying to find someone to play with when you are just out driving is like trying to pull your own teeth out but anytime I jump in my beater honda I see all sorts of people I can play with.Right now I am keeping my new combo under wraps all I will tell is it will be differant than...
  6. 9

    Albany New York

    Sounds pretty nice knowledge next year I should be able to give you a hell of a run when I get my new combo done.There are a couple of guys at the lot on central that would keep up.
  7. 9

    91 GT with 03 Cobra rims

    I did a cobra brake conversion on my 90 with 95 spindles steeda x2 balljoints and ford springs and the tires rub in the front with 17x9 and 245's when I hit bumps but it is not tearing up the tires.The rears hit the fender lip with 275's but I am going to cut it a little this winter when I paint...
  8. 9

    Cobra rear brakes on Fox body

    Rich at north cobras is great he sent the brackets to me before I even sent him the money.The gt calipers will work but you will need cobra caliper brackets or you will need to modify the gt ones to fit the cobra vented rotor I had to cut and grind about a 1/4 out of the gt bracket.Also check...
  9. 9

    Breaking up with msd box hooked up

    This started a couple of days ago.It starts to happen after driving for about 10-15 minutes it will start to break up in any gear and is worse at lower rpms.I changed the fuel filter tfi module reset the timing and finally disconnected the msd box and it seems to be gone.Have any of you guys had...
  10. 9

    Albany New York

    Probably going to the valley this saturday if it is nice out if anyone is interested in going.
  11. 9

    Albany New York

    SO they are probably going to replace the blocker rings or the whole synchro assembly its a fairly easy job.Just about every dealer has a couple of guys that are mainly trans techs so you probably dont need to be worried about it.The manuel trans in these cars are simple I can have my t5 rebuilt...
  12. 9

    Albany New York

    Ya you dont really need them but I found it easier to alighn it.I am tech at wedikind pontiac so I do everything myself .I have not looked at the tsb but if you are haveing a problem with your tranny and the tsb refers to it than you might have a problem but if you are not experiancing anything...
  13. 9

    Albany New York

    Is it a recall or a tsb cause tsb do not refer to every car they are there for the tech for diag help if it is a weird problem or a constant problem then the manufacturer will usually put out a tsb.The shifter should not matter cause it not affecting anything unless it is leaking which in that...
  14. 9

    Oil or fuel in #1 runner

    yup only got codes for evap which I dont have hooked up
  15. 9

    Oil or fuel in #1 runner

    I am having problems with it idleing that I can not figure out.I can pretty much rule out coolant as the all the gaskets are new I just put the heads and intake on last Augest.I dont have cooant running through the egr anymore I just was not sure if it waas kinda normal or not .
  16. 9

    Oil or fuel in #1 runner

    Had the upper intake off yesterday and noticed that the number one runner was wet.It was not soeked but it was wet and so was the plenum gasket.All the others were fine.I could not really tell if it was oil or gas I would have to say gas cause it was not very dark.Is this normal.Any info would...
  17. 9

    Smooth fox engine compartment

    were do I get all metal filler
  18. 9

    Idle Probs (have done research)

    My car seems to be doing the same thing but the weird part is it all started at the track last weekend.I made one run parked it in the staging lanes I get back in to go for anouther run look at my voltage gauge reads 9 volts so low and behold my alternater went crapped on me.So I go to the parts...
  19. 9

    Smooth fox engine compartment

    85gtlover do you have any pics of the engine compartment finished that is I was thinking of doing something like that or maybe with fiberglass.
  20. 9

    Smooth fox engine compartment

    Well I guess I will be gettin real drunk then cause I dont think I will be welding all those holes I just wa snot sure if someone didi it any other way but I know there is a company that makes fiberglass panels I think to go over them.
Top Bottom
Back
Forums
Menu