Search results

  1. turp23

    Pcv Valve Question

    The driver side is still hooked up. No oil leaks yet, but I just got it and haven't driven it much yet. I see no evidence of leaks on the engine.
  2. turp23

    Pcv Valve Question

    Passenger side.
  3. turp23

    Pcv Valve Question

    P/O cut the hose in half and blocked it off on both ends. Why would you do this?
  4. turp23

    What Is Missing?

    Trying to align my fenders and I know something is missing in between the header panel. What is it?
  5. turp23

    Back Again!

  6. turp23

    Back Again!

    Got another project, figured I would say hello again from Louisiana.
  7. turp23

    Throttle getting stuck

    Would I put it in line with the pcv valve, or the breather thats actually sucking up the oil?
  8. turp23

    Throttle getting stuck

    Got the RPM issue fixed by installing a stock intake I got off of ebay. Still a little jumpy while coasting, but within 950-1100 rpm. I can deal with that for sure. I got 21 mpg with all those issues and 279 miles out of a tank with 30 psi in the tires. On to other issues. First and foremost...
  9. turp23

    Throttle getting stuck

    I took the oil filler cap off with the engine running, nothing is blowing out.
  10. turp23

    Throttle getting stuck

    Took the CAI off today. The inside of the pipe is covered with oil. Its being sucked in from the vent on the driver side valve cover. So Im pretty much screwed right? In addition, the CAI piping is pathetic. The hose clamps holding the silicone sleeves on are stripped.
  11. turp23

    Throttle getting stuck

    Me and a buddy were checking out the car this morning when I got off. He asked me if it was the stock throttle body, because he heard it sucking air up by the tb when he goosed it. I have no clue if it is or not. How would I know? Also, its not sticking all the time now. When I push in the...
  12. turp23

    Throttle getting stuck

    I have a vaccum guage. Where and how do I check for vaccum?
  13. turp23

    Throttle getting stuck

    Negative. It started after water was introduced to my engine bay via the functional hood scoop the PO "installed". I do somewhat suspect the AZ CAI, but I have tightened every hose clamp I can find on it. Im clueless at this point. The code is KEEO.
  14. turp23

    Throttle getting stuck

    Only codes are for the O2 sensors, since there are no cats
  15. turp23

    Throttle getting stuck

    No success yet. So far I have replaced the IAC valve, TPS, and tightened all connections on the CAI. I also sprayed carb cleaner around all the hoses in the engine compartment with no changes. I have a stock air manifold on the way. I dont know what else to check!
  16. turp23

    Factory air intake

    what does this fit?