Search results

  1. turp23

    New car acting up already

    Replaced the sensor with a new one with longer wire. Cleared codes, now I am getting P0300 amd a P1504. Now what?
  2. turp23

    New car acting up already

    Correction- There are four sensors, no open bungs. The sensor to the rear, is fairly new, just not plugged in. It cannot reach the harness.
  3. turp23

    New car acting up already

    There is actually no O2 sensor for me to check. Just the connector. I dont think the off road H has a bung for the O2 sensor. But in a nutshell, it wouldnt make the car misfire?
  4. turp23

    New car acting up already

    I just bought a 2ooo GT. I test drove it and put it through the paces, including let it idle for 20+ minutes. When I went back the next day to get it, it started to miss about a mile from home. I washed it, and cranked it up to find it was misfiring at idle. You can hear it in the exhaust. I let...
  5. turp23

    O2 wires in harness wrong color??

    Ok, lets try it this way. If the O2 sensors are good, what should their voltage be?
  6. turp23

    O2 wires in harness wrong color??

    What does that mean? Are they good or bad?
  7. turp23

    Should I buy a 96 with blown up motor???

    I spent sometime looking at the car today. So much more comfortable and luxurious than my notch. Its super nice except for the blown motor. The car definitely has some serious street potential. Its also got a ton of add ons. I havent discussed any deals with him yet, I just dont know what to do...
  8. turp23

    O2 wires in harness wrong color??

    can anyone help me out with the voltage readings?
  9. turp23

    O2 wires in harness wrong color??

    so if the pins are right, what is the voltage I should be getting? How can one be .8 and another 14v?
  10. turp23

    O2 wires in harness wrong color??

    From wiring diagrams and replies from this board. If they changed the color, then what about the voltage? The readings I got cannot be correct. If they are correct, then one must be bad, right?
  11. turp23

    Are my 289 heads hi-po

    So what else do I need to know to figure this out?
  12. turp23

    Are my 289 heads hi-po

    They were advertised as so when i bought the car. The number I got off one of them was 289 66 5F9. Any info?
  13. turp23

    O2 wires in harness wrong color??

    I tried testing the wires for my O2 sensors at the computer and one is not the correct color. Number 29 was dark green with pink stripe and measured from .4 to .8 volts. Number 43 was dark blue with a green stripe and measured from 14.1 to 14.3 volts. Either one is bad, or one of the wires is...
  14. turp23

    figured out my rough idle!

    what is ho firing order, and how do you know to use it?
  15. turp23

    Should I buy a 96 GT with blown up motor???

    Unless I am missing it, I did not state anywhere that the notch was a GT. I was adding the fact that the 96 was a GT.
  16. turp23

    Pulled codes again w/DVM readings!??

    jrichker, can you elaborate a little more on the resistor trick? Or lmk where I can read up on how to do it?
  17. turp23

    Pulled codes again w/DVM readings!??

    what about the O2 readings I posted, the wire for 43 is not the color its suppose to be. It also is reading 14 volts. Cant be right??? And what about the little black relay thingie, anyone know what that is?
  18. turp23

    Pulled codes again w/DVM readings!??

    Secondary Air Injection Diverter Solenoid failure AM2 what does this look like????
  19. turp23

    Pulled codes again w/DVM readings!??

    This is round 2 with engine codes and so forth. My 89 notch was running horrible, missing real bad and surging idle. Well I replaced the tps because it was bad then it came alive again. In the process, my wiring harness fell onto my headers and burned up a little black box that looks like a...
  20. turp23

    Should I buy a 96 with blown up motor???

    Uhm, what does PI mean? Please forgive my ignorance...
Top Bottom
Back
Forums
Menu