Search results

  1. F

    Ground getting hot?????

    mine got so hot once the thing started smoking. it was a short in the battery, i replaced the battery and it never did it again. have the battery tested, or replace the ground cable. i think you can get a factory replacement at ford for like 13-15 bucks.
  2. F

    ANyone ever heard of putting RTV on your Cyl Head bolts? This is new to me!

    My friend runs the website in my sig. He sells that stuff pretty cheap. Cheaper than summit. He's got the assembly lub, sealer, and the ARP studs. Here's the link... The link to the products on the website...
  3. F

    car sits uneven?? WTF?

    I have the same problem, and I couldn't figure it out. I put new springs and shocks on and it didn't fix it. Let me know if you figure it out. If you do a search for this there are a couple other posts where people have the same problem, I don't think anyone knows why...
  4. F

    Anyone cut their antenna?

    I cut mine off about an inch higher than the hood of the car. At, first I didn't like it but I got used to it and remembered how dumb it looked before. I just ripped the little ball off and glued it back on. I think it took me 5 minutes total... I think it looks better now. I didn't notice a...
  5. F

    Anyone cut their antenna?

    double post... whooops....
  6. F

    new 87-93 body kit?

    i just puked a little
  7. F

    How much power can the stock cooling system take?

    Right now im pretty tight on money, you think a flex-fan and 3 core radiator will help enough?
  8. F

    How much power can the stock cooling system take?

    Right now I'm making 317rwhp. How much power can the stock cooling system take because when I use nitrous the coolant boils now. I turn the car off and it's freaking boiling in the resevoir. I'm guessing its because of the extra heat and power that nitrous makes. Would a flex-a-lite fan and...
  9. F

    Help with vacuum leak!

    TTT
  10. F

    Help with vacuum leak!

    I'm having problems with my idle and I think it's a vacuum leak. If I take the hard plastic vacuum line that connects to the back of the upper intake off, the cars idle becomes steady and runs perfect. When I put my finger over the hole on the back of the intake where the hard plastic vacuum...
  11. F

    Coolant Overflows when using Nitrous still!

    My dad was thinking that too? How do you test that, dont you use some infa red light or something? Is there a part number on the water pump, how could I check that too? It's off the charts when using nitrous... I'm definally not running lean... All your guys help is appreciated! We...
  12. F

    Coolant Overflows when using Nitrous still!

    The resevoir... Could the heads still lift with the arp head studs? I thought they were supposed to be the best. Right now I'm only running a 100 dry shot which is only like 65 rwhp. It started with the 125 so I swapped in the 100.
  13. F

    Coolant Overflows when using Nitrous still!

    I don't have underdrive pullies. Stock fan setup. The engine temperatures are about one notch up from the bottom probably around 160-170. I'm pretty sure the gauge is correct, ive had no problems with it before. I don't see any air bubbles in the coolant resvoir. I did a compression test...
  14. F

    Coolant Overflows when using Nitrous still!

    Anyone else have any ideas?
  15. F

    Coolant Overflows when using Nitrous still!

    I have one of those 160 degree thermostats in. The coolant system is burped properly, I've made sure to get all the air out of the system...
  16. F

    Coolant Overflows when using Nitrous still!

    I didn't get them milled because I dont think they are warped. I got the heads from Thumper probably about 6 months ago and the car has never been overheated, not even close. The car also passes compression tests with flying colors and drives awesome with and with out nitrous... just the...
  17. F

    Coolant Overflows when using Nitrous still!

    This it the link to the original post OLD POST Now I have... -Replace lower hose with coiled one... -Replaced Radiator cap with new 18 psi... -Replaced head gaskets... -Installed ARP head studs... I went ahead and replaced the head gaskets just to be sure and installed arp bolts but...
  18. F

    During Nitrous pass, coolant overflow OVERFLOWS????

    My stang is doing the same thing. I don't think it's a headgasket problem rather a head bolt problem. I sent you a pm...
  19. F

    Compression Tests Results! Blown headgasket?

    Anyone else have any ideas???
  20. F

    Compression Tests Results! Blown headgasket?

    The lower hose doesn't have a coil spring in it. My dad was thinking the same exact thing about the hose collapsing once the nitrous kicks in and the sudden jump of coolant flowing... After my dad and I did the compression tests we were looking at the hoses, the top hose looks ok but the...
Top Bottom
Back
Forums
Menu