Search results

  1. 1

    Car seems to lean out, popping/misfire

    I have the EXACT same problem. It has been doing it ever since my H/I/C swap last winter. I have Edelbrock performer heads + performer intake, e-cam, 24# injectors, and a C&L 76mm maf/pipe. When the motor has been sitting for a while and is cold, I get slight pop/misfire at times, especially...
  2. 1

    Looking into getting a Tremec TKO 600!!!

    I got my TKO-500 and bell housing from D&D for $1720. I got the yoke and x-member from Mustangs Unlimited for $110. I got an energy suspension poly trans mount for $30, and I got the spec stg 3 from JDSPerformance for $285 (ordered a stg 2 and was sent a stg 3!). Add it all up at it comes to...
  3. 1

    Looking into getting a Tremec TKO 600!!!

    The first 1000 miles were rough and I could not stand it for a while. The main reason was because my clutch kept slipping out of adjustment due to a faulty firewall adjuster. I switched to a Fiore adjuster a few weeks back and all is well now. The clutch is still a little much for the street...
  4. 1

    Looking into getting a Tremec TKO 600!!!

    The 600 has a manditory 26-spline input shaft, while the 500 has an option of either a 10-spline or 26. If you get the 600 you will definately need a new clutch disk, but if you get the 500 you don't need a new clutch if you go with 10-spline. 10-spline is rated to 500lbs/tq, and 26-spline is...
  5. 1

    Clicking clutch pedal

    My UPR quadrant/cable do the same thing, but only when my car has been sitting for a while? Maybe the first 3 clutch pedal presses will click, but that is all.
  6. 1

    Roush To Good To Be True???

    :jaw: :jaw: :jaw: :jaw: Something is not right here...
  7. 1

    Are friend's ex-girlfriends off limits?

    I was kind of in the same situation as you. One of my good friends broke up with his girl of 3 years a couple months ago. I can tell they still have feelings for each other, however my friend is starting to move on by seeing someone else. Anyways, this passed Thursday I was at a bar and my...
  8. 1

    How much does a stock cast iron flywheel weigh?

    All Fidanza flywheels come with a 28oz and 50oz weight that you screw on. Not sure about other brands...
  9. 1

    How much does a stock cast iron flywheel weigh?

    Go aluminum hands down
  10. 1

    Anyone running a Spec Stage 2 plus clutch?

    I disagree. I'm making roughly 280-300rwhp (estimate) and I have a stg 3 and love it. I originally ordered a stg 2 and was accidently sent a stg 3. I was going to send it back but most people said to keep it because I got a great deal and the fact that I will be set clutch-wise for the future...
  11. 1

    Will my 255lph pump be enough?

    Right now I have a Walbro 255lph inline fuel pump and its fine for my current setup which is a stock block with Edelbrock heads, performer intake, and an e-cam. However I am getting a Novi1000 in the near future and will be running 5-6psi or boost. Will my 255 be good enough or will I need to...
  12. 1

    Anyone running a Spec Stage 2 plus clutch?

    Other clutch set ups like the Centerforce DF and Mcleod are nice. My friend has a CF and I like it very much so. It is a lot easier on the leg and is easier to drive around town. IT IS a better daily driver clutch. However I just prefer my spec for now. I wanted a hard hitting clutch and...
  13. 1

    Anyone running a Spec Stage 2 plus clutch?

    The clutch will be very touchy and overly grabby at first so be prepared. I had to take my car to some back roads where there is no traffic and practice a bit. A few days later and I was fine... They say with an aluminum flywheel the more the power the better advantage with it. All I have is...
  14. 1

    Anyone running a Spec Stage 2 plus clutch?

    Go aluminum hands down. My car is my spring/summer daily driver and I'm just fine with the aluminum. It did feel like I lost a little low end from it, but boy did it make up for it on the top end. It feels like an easy 15+rwhp gain passed 4000rpms. The pros outweigh the cons so it is well...
  15. 1

    Anyone running a Spec Stage 2 plus clutch?

    Pedal pressure was very stiff at first but after it broke in it seemed to smooth out. I am use to it now and have no problems. However it definately doesn't have a stockish feel to it like some clutches do. In other words, other cluthes will feel like poo compared to it.
  16. 1

    Anyone running a Spec Stage 2 plus clutch?

    I have the stg 3 with an aluminum flywheel and its awesome. It took a little getting use to but its worth it.
  17. 1

    Solid or poly motor mounts?

    Which mounts would give me better throttle response? Right now if I nail it below 3000rpms in pretty much any gear except 1st, I can feel the car kind of shake and bit and the motor bogs because its retorqueing itself. I think my driver's side mount is cracked.
  18. 1

    Solid or poly motor mounts?

    Which would be better from a street car? Solid or polyurthane motor mounts? Which are better in general?
  19. 1

    Will energy suspension poly motor mounts work with a vert?

    Will I notice a difference over the stock motor mounts?
  20. 1

    Fidanza lightweight flywheel anyone run one?

    I have an e-cam and so far its been fine. It is a little tough to get moving when trying to start off slow but you will get use to it. I would def. go aluminum over steel. The rpms seem to climb much quicker. It seriously feels like I ganged 15rwhp 4000rpm----->
Top Bottom
Back
Forums
Menu