Search results

  1. Grn92LX

    Rear End Gears

    Probably very little 100 rpm or so. I have 4.30's in my street car its not that high, usually under 2500 cruising.
  2. Grn92LX

    Is There A Upr Discount Code For Stangnet Members?

    They are offering free shipping currently. They had a 15% off cyber17 code but it probably expired. I just ordered a set of UPR coilovers with the 15% off code & free shipping. Hard to pass up.
  3. Grn92LX

    How Do You Control Your Fan?

    Bosch/tyco 75a relay, $5 switch, 10g wire. 15 years no issues.
  4. Grn92LX

    Favorite Car Of Your Teens/early Years...

    Fox body's and 79 Trans Am's 400/4spd.
  5. Grn92LX

    Mikes Tip For The Day. Adding A Cobra Brake Booster.

    It was a pain but my cobra booster went in with no slotting or banging the strut towers.
  6. Grn92LX

    331 Need More Hp

    Don't waste any money on ignition upgrades. I'd go straight to a 42lb injector (24's are too small for a stroker build) and they will allow you room to grow. Use a edelbrock victor efi intake and a custom cam. I don't know your exhaust but it should be at least 1 3/4" longtubes. 10 second...
  7. Grn92LX

    Performance Flywheel

    That makes zero sense. Any flywheel could potentially break and go flying into the car, not just a fidanza aluminum. They're made in America fyi not china.
  8. Grn92LX

    How Big Of A Pain Is It To Replace At Starter, Really?

    The mini's come out easily. Getting my msd starter in was a little bit of a pain though but a factory mini is easy. Ratchet wrench for the top bolt from under the hood.
  9. Grn92LX

    Upgrading Throttle Body?

    You don't need a tb yet. Wait until you do a good set of heads/cam/intake. Then go straight to a 75 (as long as it matches the inlet of the upper manifold)
  10. Grn92LX

    Performance Flywheel

    I like my fidanza aluminum flywheel. 12 years no problems. Do you 'need' one, probably not. I needed an sfi 28oz balance flywheel so it made sense for me. No downfalls except the cost. I like any rotating stuff thats light weight. When I did my 347 I spent a few bucks extra on stuff like...
  11. Grn92LX

    Guess The Horsepower

    Reverse those numbers, thats more like it. 290hp/327tq.
  12. Grn92LX

    What Heads / Cam To Buy?

    You want aggressive, ditch the cobra intake. Trick flow 190's, holley systemax, Ed Curtis cam, But unfortunately aggressive and $1000 budget isn't happening. You need to save a bit more. You won't even get good heads for $1000. Follow this link here as an example...
  13. Grn92LX

    Need A Quick Answer On Differences With Ball Joints And Control Arms After Doing 5 Lug Swap

    If you are using fox ball joints then you need a spacer. Otherwise, just press in sn95 joints. I rebuilt my stock arms with moog sn ball joints and polyurethane bushings when I did my 5 lug.
  14. Grn92LX

    Trickflow Top End Kit - Wow!

    Too bad the track out in west hampton closed years ago.
  15. Grn92LX

    Trickflow Top End Kit - Wow!

    I went 12's 15 years ago with that kit with nitto 555r's on stock pony wheels. Did they dyne tune it or is that just setting the timing?
  16. Grn92LX

    Fox Performer Intake Install Questions (gasket)

    1250s3. You'll need to go over the torque sequence multiple time to get it to seat properly. It;ll get annoying how many times it takes but has to be done. Sometimes the little 90* coolant hose form the pump to the housing will break during removal so you may need that. Just make sure you clean...
  17. Grn92LX

    Exhaust Options For Catted Mid-pipes

    Mac used to make one, not sure if they still do. They still do emissions where you live for obd1 cars?
  18. Grn92LX

    Looking For Rims For 5 Lug Swap On 87 Mustang

    I'm running ROH ZS wheels with my 5 lug set up. 17x8.5 front and 17x9.5 back with 275's. I'd recommend saving up some more and doing a proper 5 lug set up with disc all around.
  19. Grn92LX

    Used Tw Heads

    which trick flows? I sold my old twisted wedge 170's a year ago for $1000 shipped. They were freshened up and had a good valve train on them but no porting. They were about 15 years old.
  20. Grn92LX

    1993 Cobra Engine Rebuild Questions

    Rebuild the short block using the oem parts but use a good forged piston and arp rod bolts and arp main cap studs. Use a trick flow TW head and a custom cam. Don't cheap out $100 on a cam with 90's technology. Have the cobra lower intake ported.
Top Bottom
Back
Forums
Menu