Search results

  1. HotFox

    What's Your New Year Project Plans?

    Finish building my 427SBF, dyno it and set it in the car. Build the "spare" 408 short block to sell. All before Miral valve replacement/repair. Jury still out on when that will happen. Scott
  2. HotFox

    Progress Thread Hoopty v2.0 - It All Snowballed

    I'm building a stock block 408 to sell....could ship to Texas!
  3. HotFox

    Best plugs for carb'd roller

    Blue strap means to much timing! I would replace plugs (atleast the blued ones) and pull atleast 2 degrees, test again. A carb will be inherently rich, put cats on if you want it to smell better. Tune for leanest cylinder...
  4. HotFox

    MS3 Pro

    Following for my 430cid SBF NA in my 92. Has had a carb since I bought with the 331cid so starting with a carb on the new engine build, but did buy a super victor EFI with intentions of going EFI later, ports will be plugged for now. There is no EFI wiring left so will need to make or buy a...
  5. HotFox

    Progress Thread Hoopty v2.0 - It All Snowballed

    That sucks man! Please weigh carefully the difference in price between what you buy and custom! Remember if you stick some used POS in, or cheap off the shelf lifters and you have to do a partial or complete tear down. You will be money ahead with custom with the correct supporting parts...
  6. HotFox

    Stangnet T-Shirts

    $4.50 for a 4X what a rip! JK ordered a couple large shirts! Thanks, Scott
  7. HotFox

    Progress Thread Hoopty v2.0 - It All Snowballed

    Yeah I would be giggling to...no machine shop is quick around me....but if they are busy it means they are damn good!
  8. HotFox

    Progress Thread Hoopty v2.0 - It All Snowballed

    Just make sure block and head are flat and you will be fine. MLS might have a Ra requirement just make sure head and block are in spec on that, any reputable machine shop can measure that.
  9. HotFox

    Progress Thread Hoopty v2.0 - It All Snowballed

    If you are staying NA, deffinently stick with the thinner HG. You should be targeting quench under ~ .045, .060 is to much., unless you are spinning 9K then maybe .045 -.050.
  10. HotFox

    Looking for input on Motor choice

    Wow this is the first time I have seen a 8.2 making a smige over my 331 I was at 469rwhp, block lasted 11 years. Cracked #2 main boss and cracked the eagle crank, turned as high as 8400rpm. Now building a 427 Maxx 4 bolt block and Molnar rotating assembly.
  11. HotFox

    Progress Thread Hoopty v2.0 - It All Snowballed

    Sure enjoy your videos, you don't bs, talking non stop about useless stuff. This is deffinently a video to help others doing a swap like this.
  12. HotFox

    Temperature sensor thread size

    That's what I figured it was! Thanks!
  13. HotFox

    Temperature sensor thread size

    Can someone tell me what the thread size is on the temperature gauge coolant sensor for my 92? I believe they are the same from 86-93. After having my car apart for 3 years I have misplaced the damn sensor and want to know if it is 3/8 or 1/4 pipe thread. Thanks! Scott
  14. HotFox

    Progress Thread Hoopty v2.0 - It All Snowballed

    Nothing like a shinny painted car in the snow pics! Stay safe down there!
  15. HotFox

    Progress Thread Jewel Green street/strip 92 LX progress thread

    New Diamond 4.135" pistons coated at Line 2 line. Be bringing them to the machine shop on Monday to finish machining. Hope to be building the short block in the next month or so.
  16. HotFox

    SOLD Long tube Bassini headers

    Stepped 1-3/4" to 1-7/8" with 3" collectors, ceramic coated, off my 92 Fox 331cid. They sat pretty low so added skid plates, could be for 351 not sure. Located in SE Michigan 48346 Buyer pays actual shipping. But prefer local pickup. $850.
  17. HotFox

    For Sale 93 Cobra master cylinder

    Original Ford core 1" rebuilt and purchased for a Carrol Shelby Cobra kit car, used for about 1 year and removed to change to different brake setup. Taller reservoir installed off a F150, can be swapped back it desired by removing roll pins. I don't have the Cobra or mustang reservoir...
  18. HotFox

    SOLD 85-86 (1) fog lamp housing without glass

    From my dad's 85 mustang been in a cabinet better then 30 years. Located in Clarkston, Mi 48346 (SE Michigan) $10 plus actual shipping charges.
  19. HotFox

    Progress Thread Jewel Green street/strip 92 LX progress thread

    I am in a similar situation with my heads. The AFR 205's are 58cc due to the 331 set up. So to run them on my on the 351 block using a 4" crank with 6.250" rods. To get to the target compression of under 11:1 my machine shop found a off the shelf Mahle 4.040 piston with 26cc dish. That puts...
  20. HotFox

    Progress Thread Jewel Green street/strip 92 LX progress thread

    Another update, Machine shop is slowwww on the spacers for running a 2.75 Molnar crank in the 351 block. Apparently the conversation bearings are out of stock, so he is using a Cleavland race bearing, has to cut the adapter for that bearing tang which is different then the conversion bearing...
Top Bottom
Back
Forums
Menu