Search results

  1. C

    emissions problem....

    where is the hose? what does it go to?
  2. C

    Suspension problem

    I think steeda has them pretty cheap. I got my x2 ball joints, and bumpsteer kit for 200. not too bad. not to hard to install either
  3. C

    03/04 Cobra vs. STi

    your right on the plus with all wheel drive, and maine's weather, i would imagine. personally, there's a totally different feel to awd. it's like the car just lifts up, I like being thrown back into the seat, as the back end squats on take off, and being able to do a burn out, at will. But if I...
  4. C

    Need your expert opinions

    get it checked out first!!!
  5. C

    emissions problem....

    you'll love the gears, and an offroad pipe will definately make you smile. pretty easy to change out as long as the hardware works with you.
  6. C

    Exhaust Question (again) and little intake question.

    the bassani might be stainless, as well as the magnaflow, not sure though. and you will probably need a tune for the new maf if it is bigger. not sure if you knew that. you might want to try mustang exhaust for more details. I have an offroad h, and flows so I must like a different sound. good luck
  7. C

    I know not another imrc?

    they seem to be opening and closing fine, i'm sure they look like crap though. I have a chilton manual for it. Just don't want to screw something up, being bored. if I have seen it done before I'm not as nervous. I have seen the inside of a stroked 4.6 dohc motor, completely taken down to the...
  8. C

    Motor rebuilt & it won't idle for very long???

    you could try adjusting your idle set screw, so it idles a little higher. I helped out with a 98 a couple of weeks ago, and once it started, and went into closed loop idle about 30 sec. it would die. we just turned the idle up 200 rpm or so. It had a melted o2 sensor extension connection though...
  9. C

    2001 Cobra Wheel Torque Requirements

    I put mine around 100ft lbs.
  10. C

    Brake dust...GRRRRRRRRRRRRRRRR

    they have some new product on the market for that, might look at an auto parts store, or walmart. I just saw an ad for it in the last week. Just don't remember who makes it. What kind of pads do you use, ceramics are suppossed to produce less dust, but my hawk hps, don't produce much, atleast...
  11. C

    I know not another imrc?

    My cobra has 109000 miles on it, and had the fatory plugs until 2000 miles ago(bought it used). I just spent 45 min reading and searching imrc stuff, and I was wondering if I should break into the intake to take a look. I don't notice anything weird when I get on the gas, especially with the...
  12. C

    emissions problem....

    you might want to search for it brfore you go digging into the iac, I'm not sure how it measures the air flow, but cleaning a maf can be delicate work, and if you mess it up, you will have to order one from ford. but just pulling it off won't hurt. don't break your gasket, it might be stuck to...
  13. C

    Cobra Rims

    some guy just borrowed my stock 17x8's to drive up to WFC8, and was putting 315's on them. I guess he made it there and back, but I wouldn't recommend it. a 245 is 9.6" wide roughly, and a 315 is 12.4" . Click on my link below, there are some pictures of 295/35 tires on a 10" rim. for a 315 you...
  14. C

    Deal of a lifetime or SCAM??

    sounds screwy to me. I would want something more than that if I was considering buying a car from greece, that has a clear us title. maybe you should get some buddies of yours to send her the same email, and find any discrepancies. I assume this is an individual? and free shipping from greece...
  15. C

    emissions problem....

    1443 in my book is your idle air controller. It is super easy to remove, might just have some extra build up in it or something. it should be to the right of the cobra plaque. two bolts, a gasket, and a wiring clip. try pulling it off. and checking it. I'm not sure exactly what it does, but...
  16. C

    CAI, PULLEY suggestions???

    I plan on ordering a mgw shifter one of these days, and either a cold air kit, or pullies. My main question, is what brands are better. I was told to stay away from march pullies for some reason, don't remember why exactly. and I don't plan on major engine mods until it needs to be rebuilt, so...
  17. C

    Suspension problem

    if that is the case, just so you know, you need a special press to get them out. I know steeda replacements, can be relubed with a grease gun.
  18. C

    some fun on the way home!!

    Yeah there are a couple of places where it's straight, and if your gonna do it, than you have a split second decision heh what the heck. I doubt the cop cars could keep up on back roads. Just only when it is safe, and plenty of room to slow down, before you hit traffic. drive safely guys! :nice:
  19. C

    some fun on the way home!!

    is that in your 03, with 3:55's I am assumeing? I think something isn't tight in the back end, I feel some vibrations, at different speeds, before the aluminum driveshaft, it was really bad, above 85, now just a little around 70-75, depending on throttle position. It just wants to stay around...
  20. C

    Suspension problem

    after I dropped mine, my passenger balljoint went out pretty quick, kinda sounds like the same thing. You can try to get under it and grease some stuff up, unfortunately the factory balljoint boot, is sealed, I ijnected some into mine to temporarily shut it up. Pep boys diagnosed it for me for...
View older results
Top Bottom
Back
Forums
Menu