Search results

  1. wurd2

    Mach 1 315's

    Thanks for your comments. I have a MAC ProChamber H-Pipe (2.5" diameter) and a MAC cat-back setup (2.5" diameter w/ 3.5" chrome tips). My exhaust setup is under a little bit of strain because of the fit not being perfect. Also, my exhaust tips don't exactly line up with the rear bumper...
  2. wurd2

    Mach 1 A Few N/A Speedometer Videos

    I made a few speedometer videos some time ago and I thought I would share them here on this forum. Enjoy everyone: #1. http://www.eleventeen.net/webpage/videos/Mach1-00to70.mpeg #2. http://www.eleventeen.net/webpage/videos/Mach1-25to95.mpeg
  3. wurd2

    Mach 1 Mach 1's w/ aftermarket wheels!!

    Hey thanks a lot! :nice:
  4. wurd2

    Mach 1 Need Advice on New Mach1 Wheels & Tires

    Here are the specs on my wheels and tires: Rear: Black Bullitt Deep-Dish Wheels 17x10.5" (27mm Offset) Nitto NT555R Tires 315/35 Front: Black Bullitt Wheels 17x9" (24mm Offset) Nitto NT555 Tires 275/40
  5. wurd2

    Mach 1 CnL CAI with TB tube...

    There are some Tokico Illumina struts hidden in that picture as well! :cool:
  6. wurd2

    Mach 1 Mach 1's w/ aftermarket wheels!!

    red302, I do have a minor rubbing issue in the rear when I drive quickly over bumps or into driveways at an angle. One time I did find a tiny bit of rubber on the fender lip, and I think it actually happened on a shift into 2nd gear. I could not find any evidence of damage on the tire though...
  7. wurd2

    Mach 1 315's

    I am running Nitto NT555R 315/35/17 tires in the rear on 17x10.5" deep-dish bullitt wheels with a 27mm offset. I have Sprint Performance lowering springs which dropped me close to 2" after settling. I am not using any spacers and I have only a minor rubbing issue when I drive quickly over...
  8. wurd2

    Mach 1 how does a mach1 sound with exhuast?

    I have a MAC ProChamber and cat-back setup. And here is how she sounds: http://www.eleventeen.net/Webpage/Videos/Mach1Exhaust.mpeg
  9. wurd2

    Mach 1 CnL CAI with TB tube...

    Being that I haven't frequented this board in a long time, I feel compelled to post large offensive images:
  10. wurd2

    Mach 1 Mach 1's w/ aftermarket wheels!!

    Time to offend everyone with my over-sized pictures:
  11. wurd2

    Mach 1 Need Advice on New Mach1 Wheels & Tires

    After all this time, I wanted to thank everyone for their feedback. I ordered my wheels from MustangTuning.com. Here's a few pictures:
  12. wurd2

    Mach 1 MAC ProChamber H-Pipe

    MAC Exhaust Part Numbers I'm sorry, I don't have the part numbers for the MAC pipes. You shouldn't have trouble finding the part numbers based on the descriptions though. The cat-backs are also MAC with 2.5" diameter piping and 3.5" chromed tips. I really love the sound of this setup...
  13. wurd2

    Mach 1 MAC ProChamber H-Pipe

    MAC ProChamber H-Pipe Review We had some issues installing this pipe, but the pipe itself wasn't the problem. The nuts fastening the passenger-side of the stock h-pipe to the headers were *extremely* tight. My cousin and I succeeded in mangling these nuts enough to warrant use of a torch. On...
  14. wurd2

    Mach 1 Recomendations for an aftermarket exhaust for 04' mach 1?

    Bassani? I think the general opinion of Bassani is that their pipes are expensive and difficult to install. I can say that if you go with 4" Bassani piping, you aren't going to have fun with the installation process, and your exhaust will most likely rub against the frame and tap against the...
  15. wurd2

    Mach 1 Recomendations for an aftermarket exhaust for 04' mach 1?

    MAC Exhaust System I recommend MAC exhaust pipes. I have a MAC ProChamber H-Pipe and Cat-Back. You can see and listen to my exhaust setup at: http://www.eleventeen.net/Webpage/Videos/Mach1Exhaust.mpeg I am very happy with the performance, sound, and looks of these pipes.
  16. wurd2

    Mach 1 Need Advice on New Mach1 Wheels & Tires

    I'm looking to buy some new wheels and tires. My intention is to get the widest wheel possible on the rear without having to make any kind of modifications beyond spacers. I would also like to get some black rims for contrast with my white paint. I was considering the following rims, which...
  17. wurd2

    Mach 1 Mach Exhaust Improvements

    MAC ProChamber H-Pipe and Cat-Backs I am extremely happy with my MAC exhaust setup. I definitely picked up some horsepower, but I'm not sure how much exactly. And when it comes to looks, the fat chromed tail pipes are just beautiful. Here's what my exhaust system sounds like...
  18. wurd2

    Mach 1 $100 Steeda Shock Tower Brace for Mach1 (w/ Picture)

    Steeda Brace Installed (More Pictures) Apparently my ability to eyeball the brace fit over the K&N AirCharger failed me. The brace could have been forced into place, but it would have put a great deal of strain on the AirCharger kit. Our solution was to cut 1/2 inches away from each side of...
  19. wurd2

    Mach 1 $100 Steeda Shock Tower Brace for Mach1 (w/ Picture)

    $100 Steeda Strut Tower Brace for Mach1 (w/ Picture) My Steeda brace arrived today. It looks really nice, but does lack a Steeda logo. The brace appears to clear the K&N AirCharger kit, but I won't know for sure until I install it. Also, the kit does include instructions and bolts, washers...
  20. wurd2

    Mach 1 K&N AirCharger Kit for Mach1 Review

    Yes, there is a slight increase in throttle response. Not sure if that's worth $250 though. I guess it is if you're serious about your Mach1.
Top Bottom
Back
Forums
Menu