Search results

  1. RMODEL65

    Savannah Georgia stang gatherings

    what day?
  2. RMODEL65

    5.0 swap guys inside.....

    headers get an exhaust shop to add the bung for the o2 to screw into any vintage header will bolt to a stock 5.0 trans will bolt right up u need a 50oz balance flexplate though with the proper tooth count just count ur stock ones! use the stock starter with ur new flexplate with the...
  3. RMODEL65

    power steering to manual

    great article on suspension parts removal!! it will work on the steering ram also!
  4. RMODEL65

    ssbc brakes

    yep now for the rears and the part about it not running etc lol
  5. RMODEL65

    ssbc brakes

    i finally got all the pieces and finished the install! now for the rears and to get it running and the interior! <center> <a href="http://i44.photobucket.com/albums/f4/rmodel65/100_0330.jpg" target="_blank"> <img src="http://i44.photobucket.com/albums/f4/rmodel65/th_100_0330.jpg"></a> <a...
  6. RMODEL65

    Fox sun visors - vert VS notch/hatch?

    the visors just slide on and u squeeze the metal(inside thevisor) to cling tighter to the rod! inside where it pushes thru
  7. RMODEL65

    Fox sun visors - vert VS notch/hatch?

    mive are on a metal bracket that the top latches to they have a rod that goes all the way thru and its a tight fit hold on a post a pic in a min i got an extra set for my car!
  8. RMODEL65

    What hold on the side door moldings??

    u can saw them off with mig wire! then clean off the adhesive. on the 87-93 gt i personally dont think it would flow very well with out the door mouldings!but other years like the four eyes can get away with it svo came with minimal moulding like none on the doors
  9. RMODEL65

    How to prep bumper after sanding

    did u take it to the rubber or just scuff the paint if u just scuffed the paint wax and greaser it, tack it off and paint
  10. RMODEL65

    Replacing the back window on a convertible

    need a staple gun that will fit down in the channel!! not just a regular one! remove the well liner, u have to peel back the top from the rear of the car to reveal all the staples on the 3rd top bow. so u have to unbolt the top strip that behind the well liner
  11. RMODEL65

    My feet are sweating!

    maybe the boot for the shifter is torn or missing? heat could be coming thru and heating up the console and coming thru the ashtray hole, etc!
  12. RMODEL65

    5.0 clutch pedals or 4cyl clutch pedals

    pretty sure the length of the clutch pedal is different dont know if it matters
  13. RMODEL65

    T-top 86 SVO?

    no some of them came with sunroofs but no ttops cause it compromised the integrity of the car and deminished handling
  14. RMODEL65

    Lets talk about body work

    yeah get a book or read the above site and invest in por15 for the rusty spots!!!
  15. RMODEL65

    Source for another 351C block?

    cleve core www.ausford.com they import aussie cleve parts pretty cheap and the blocks are stronger!!
  16. RMODEL65

    5.0 headers on 351W in a 65?

    doesnt jba have a shorty header for 351w swaps?
  17. RMODEL65

    What do I need to install kickdown cable?

    yeah its a nut then the "e" shaped clip holds the cable on to the lever!
  18. RMODEL65

    Toploader stuck in 3rd?

    yeah my tranny was stuck i removed the shift linkage like above it was stuck in a gear? i moved the all the levers and now it works smoothly! but i did the linkage on the tranny its self instead of the shifter so i wouldnt have to readjust the linkage! then i decoded the tag on the tranny its...
  19. RMODEL65

    tips for driving for better milaege?

    yeahbumping the timing helps but the new found power is hard to resist! lol
  20. RMODEL65

    how hard is it to bleed brakes?

    its not that hard it just takes time Bleeding the Brakes BLEEDING THE BRAKES Bleeding the brakes requires a properly sized box wrench for the bleeder and the clear plastic bleed hose provided with your system. Good quality, non-silicone fluid is also a must. Baer Brakes has...
Top Bottom
Back
Forums
Menu