Search results

  1. M

    need help with 2 chamber flows please

    for the stock 2.25'' exhaust, the part number is 42443. I don't think you can get rid of the drone with a chambered muffler, and thats why I want to get rid of mine.
  2. M

    need help with 2 chamber flows please

    chambered mufflers sound bad with the style of x pipe BBk and bassani use...a lot of people really like the sound of the upr x with flows
  3. M

    New Possible Rim Pics

    you just sold me on the anthracite fr500's...can you photochop em on to a lowered white GT for me by chance?
  4. M

    FRPP C Springs?

    yep
  5. M

    FRPP C Springs?

    the directions that come in the box say that if you want to cut the rears, cut off the top part of the coil, and if you want to cut the fronts, cut the bottom part
  6. M

    FL UNDER STATE OF EMERGENCY

    My family is lucky enough to be 25 or so feet above sea level (wow that sounds like a lot) so we are in zone D or E I believe. We also got that 3m hurricane film on most of the doors and windows, so we will be boarding up the front door (with glass on the top) and one window that didn't get the...
  7. M

    Nut off the top of the struts??? How to remove?

    if you don't have access to an impact gun, you can stick a screwdriver or something of the sort in the slot on top of the threaded part of the strut and use that to keep it from turning and then use a box wrench to loosen the nut...worked for me, but it was a little frustrating
  8. M

    quick question on strut and spring install

    its a night and day difference over stock. I ran the springs for a couple of months before I did the shocks/struts and the ride was a bit rough. They definately smoothed the ride out a bit, but it still is a little bit bumpier than stock. I do have to go slow over bumps and after the shocks...
  9. M

    Experience installing Steeda Sport Springs

    I am now trying to replace the lca's and uca's, so needless to say I cannot go any other route than to drop the lca's
  10. M

    quick question on strut and spring install

    its a good idea to wait about 2 weeks to let the springs fully settle. When you do your struts, you won't need to remove the tie rods or any of that, so I don't think you will need an alignment...at least this is what I am hoping because I just replaced my struts/shocks last weekend.
  11. M

    Experience installing Steeda Sport Springs

    This seems to be a pretty common problem...the axle shifts somehow and I still haven't figured out what I am doing wrong. I have the car jacked up and on framestands just like all the directions say, but somehow the axle keeps shifting. It gets really agrevating, but I guess thats what we have...
  12. M

    Best gears for the money

    If they sent you the wrong part, why did you install it instead of sending it back and getting the right one? Kinda sounds like your fault on that one...
  13. M

    Fox Lake P51 2V Intake

    I read a few months back that Tim tested this intake on (I think) GIJOE's car and lost alot of hp...I tried to search for it but I couldn't search back long enough on modularmustangs.net it was being compared to a ported bullitt intake
  14. M

    Questions about MagnaFlow - PLEASE HELP!

    yes
  15. M

    Questions about MagnaFlow - PLEASE HELP!

    both magnaflow and magnapacks are straight through design...the difference is that there is more "padding" around the flow tube in the magnaflows, which makes them more quiet. The magnaflows have a rectangular shaped case because of the extra padding (which they describe as something equilivant...
  16. M

    catted X or o/r x pipe

    magnaflows are straight through not chambered
  17. M

    ahhhhhh PLEASE Help me! i cant decide which SC!!!

    yes you can upgrade the pulley for more boost. The reason people say that the kenny belle is better for the street is because you have 400 ft/lbs of torque at around 2000 rpm, whereas with the vortech you would have to spin it to about 4500 and higher to see that much. The KB will feel like a...
  18. M

    Cheapest place for driveshaft and sub frames?

    if you look at the ford racing section on speedconcepts.net, they still show the aluminum driveshaft for like 140, but I am not sure if they will sell it that cheap
  19. M

    Mustangtuning xpipe with cats?

    there is always the potential for a SES because you are going from 4 cats to 2
  20. M

    Ever heard of Wiffle?

    I think you mean whipple...there are some cobras running around with them but I don't think they have any production models for the GTs.
Top Bottom
Back
Forums
Menu