Search results

  1. 2

    SCT SF3 Tuner help

    might be a good idea to get a dyno pull with air/fuel so you can adjust the fuel if needed as well as backing the timing off a couple degrees
  2. 2

    Quarter Horse, Paul Booth or TunerPro

    Original poster was stating he already had a QH , but was asking which program to use with it , I suggested BE and EEC analyzer
  3. 2

    1997 Rear Diff.

    replacement cover shouldnt cost much if it is bent , but as stated above you can check it with a straight edge to see if its bent , when you reseal it next time torque it down in criss cross pattern and use silicone with no gasket thats how Ford sealed them from the factory
  4. 2

    Diablosport Predator Custom Tune Question

    I do not think you can modify the custom tune files on the predators , but if its just a bolt on car you should be able to just load the stock tune back to the car to get you thru inspection , if its modified with different injectors and MAF etc. you will have another custom tune done to turn...
  5. 2

    Disappointed, light rant...

    well if the pip signal is shorting it could stand to be that its crashing the software
  6. 2

    Disappointed, light rant...

    If you are having trouble getting the distributor system and A9L to run correctly then going to a more complicated setup would not be my advice
  7. 2

    Disappointed, light rant...

    If you need help download crossloop.com and call me tuesday after 9am and I will dial into your computer for you and see if I can help , cell is 540-875-8722 , email is [email protected] , email me what version of BE are you on ?
  8. 2

    JLT CAI & SF3 Tuner

    skip the JLT intake
  9. 2

    Found a Procharger on CL and have some questions?

    Only buy it if you can afford to send head unit off to get checked out and have the intercooler pressure tested by a radiator shop , last 2 used kits I have seen came with wrong year parts and missing small parts as well , 96-00 and 01-04 I think are different , and 1 had leaking intercooler
  10. 2

    Dioblo Tuner for sale U7145 2007 -2009 Mustang UNLOCKED

    Need to post this in Classified section
  11. 2

    Transmission Noise SCT Automatic

    Never seen this myself , probably need to reinstall the stock tune and make 100 percent sure it does not do it with stock tune and possibly have Ford dealer or trans shop look at it , do any CE light codes come up ?
  12. 2

    Where can I find a single 03-04 cobra fuel pump?

    why not just use 2 focus pumps or to GT40 pumps
  13. 2

    Bama Tunes

    Again nothing any other SCT dealer can't do and if they are local to you then great
  14. 2

    Bama Tunes

    It would be easier to just turn the wheel just one complete rotation and see if turns 3 and 1/4 turns = 3.27 , 3 1/2 turns = 3.55 , 3 3/4 turns = 3.73 and 4 complete turns is 4.10s LOL not trying to be a smart ass but most people would probably lose count with 10 turns of the wheel
  15. 2

    Bama Tunes

    An SCT SF3 from any reputable SCT dealer will be no different that the one you get from BAMA , support your local tuner if you have one , he will appreciate it when you ever need him to dyno tune your car once you modify it further
  16. 2

    I need a good clutch

    Centerforce Dual Friction is the best street car clutch you can get IMO
  17. 2

    Tuning for Methanol injection?

    most people run a chip with a switch to change between methanol and non methanol tunes , its faster than having to stop and flash the car
  18. 2

    Vortech SQ V2 - Stock Pulley Size

    stock pulley is 3.6 inches , stock engine 3.33 pulley should make 10lbs or more usually , intercooler , heads , exhaust and powerpipe all can affect how much boost you see
  19. 2

    Vortech v3 SCi kit installation questions

    Is your car stock ? What injectors and MAF do you currently have ? Has your fuel pump been upgraded ? I just did an install on a car that was NOT stock and I had to swap several parts back to stock components in order for it all to work , but we did leave the C&L MAF and 30lbs injectors and...
  20. 2

    CAI

    Your K&N is better than the BBK , trust me , the plastic tube will not absorb heat as the metal units do