Search results

  1. 2.3Lxhatch311

    I really need you guys help on this one

    Yes on stock injectors, brand new infact. The engine should be grounded properly, as a few days ago I corrected a ground problem that wasn't causing this. The cam gear points at the timing mark ,I checked it with the light to be sure (aimed timing light at cam gear with engine running) I don't...
  2. 2.3Lxhatch311

    I really need you guys help on this one

    gonna throw in a new coil, see what that does...
  3. 2.3Lxhatch311

    I really need you guys help on this one

    DAMN. I just called fairway ford and their tec had no clue. So it's no wonder nobodies answering... Looks like I'm screwed...
  4. 2.3Lxhatch311

    I really need you guys help on this one

    Okay, so I just got finished setting my timing. At Base timing, the car runs like total ass. It sputters and back fires when I rev it. I'm using a brand new light. When I plugged back in the DIP switch (or what ever you call that jumper) I noted that the timing mark moved farther back in the...
  5. 2.3Lxhatch311

    93 Mustang LX 2.3L

    :rlaugh: Hardcore!
  6. 2.3Lxhatch311

    I really need you guys help on this one

    looks like this
  7. 2.3Lxhatch311

    I really need you guys help on this one

    Air Charge Temperature sensor, Okay, I already replaced that I believe. It's on the firewall side of the lower intake right?
  8. 2.3Lxhatch311

    I really need you guys help on this one

    I'll have to look up what that is... thanks though!
  9. 2.3Lxhatch311

    I really need you guys help on this one

    Thanks. My EGR is non functional. I just purchased a voltimeter and would like to test my TPS for proper adjustment, does anyone know A: what range to use B: what my reading should be at idle and C: which wires do I pull from? My O2 sensors are both pretty new, but if the TPS turns up normal...
  10. 2.3Lxhatch311

    CarFax anoyne have it?

    It's not likely someone will do for you free what they had to pay for... but if someone does, they're extra nice. I'd consider it, but I think my subscription wore out last week...
  11. 2.3Lxhatch311

    Knock sensor all knocked up...

    ***I was wrong about which sensor I unplugged*** I replaced the MAF. The knock sensor is fine. So was the MAF, apparently. Because the car still acts the same. Going down the road, it runs okay at times, and misses like HELL other times. I'm about to swap the new O2 for the old one and see if...
  12. 2.3Lxhatch311

    Knock sensor all knocked up...

    I was wrong, it was not the knock sensor, it's the MAF sensor. I replaced it with another and it acted the same. Crappy. Unplug it, it runs better. What in the hell could this be???? I guess it really is the damn ecm.
  13. 2.3Lxhatch311

    Bastards!!!!!

    well now I'm just gonna stay confused. I'm gonna change my name to 140cilx-hatch311
  14. 2.3Lxhatch311

    Taurus ECC-IV in the stang?!

    that's really wierd. I've never heard of a 2.3l taurus. Maybe that's the model name for the computer? Just a thought, nothing to base that on...
  15. 2.3Lxhatch311

    Knock sensor all knocked up...

    Well, after changing my fuel injectors, O2 sensor, TPS, ECT, Distributor, and DIS Module, the car acted WORSE THAN EVER on the road. So I came home and unplugged the knock sensor on a hunch. It cleared right up. Keeping in mind that I have an N/A, does this mean the sensor is bad? Or does it...
  16. 2.3Lxhatch311

    Bastards!!!!!

    Sorry woodster, they thought of that (at least on this site) I hovered for quite sometime and the icons did not appear...
  17. 2.3Lxhatch311

    Bastards!!!!!

    OMG yall are different people! I thought that was just your new name after the 'all mighty' crash! I'm so disallusioned now...
  18. 2.3Lxhatch311

    I really need you guys help on this one

    I replaced the flange, no difference. I guess I'll be replacing the O2 and the TPS, or at least adjusting the tps. I wish to God this car was OBD II. But wishes don't come true. So, how difficult is it to change out the ECM? I've located the one in my 88, but it looks like I have to take the...
  19. 2.3Lxhatch311

    I really need you guys help on this one

    Checked the regulator, no gas in vacuum line, but there is a problem. The flange coming off the manifold for the vacuum line is excessivly pinched. I am assuming this is a part of the problem. Should I A: replace the flange or B: re-route the vacuum line? I have another flange availible, but...
  20. 2.3Lxhatch311

    I really need you guys help on this one

    Yeah, I was going to get my dad to bring over his voltimeter tomorrow if he can. I don't have one. It's supposed to be reading 1v at idle, right? (I will check the Regulator in 5 min) Can the regulator really make it run THAT rich? The vacuum hose on the one on my taurus got burned through and...
Top Bottom
Back
Forums
Menu