Search results

  1. 86Cobra

    Fuel injector experts.......

    They'll be fine if you have well chosen heads, cam, and intake. I run 36s in my NA 306. Not a problem.
  2. 86Cobra

    Curtis or anderson?

    That works both ways. Both guys sell TFS and AFR (and many others). Tooley prefers TFS, Ed prefers AFR. Both are great guys to work with and have a lot of knowledge to pass along.
  3. 86Cobra

    Curtis or anderson?

    I use TWs ported by Tooley and a cam from Ed. They work really well together and both are great products.
  4. 86Cobra

    347 NA Injector size?

    At least 30s. I'd run 36s.
  5. 86Cobra

    eec wire harness swap

    Get a couple of wiring diagrams (Haynes and Chiltons) and match up the wires. It helps to have more than one set of wiring diagrams. Go to a salvage yard and get the two male 8 pin connectors you need then pull the wires from the old 86 connectors and insert them into the new ones.
  6. 86Cobra

    Holley Systemax 2 or Trick Flow?opinions

    Yep, I'm with Perky. There's no need to use the same company for heads, intake, and cam. This crap about them all being matched together is BS marketing. Pick the best parts from each company.
  7. 86Cobra

    Need opinions on round mufflers

    I run 3" round Ultraflos (not Bullets). I really like the sound - solid bassy idle but not obnoxious. They're kinda big (6" diameter) though - I'm not sure they would help you on a side exit setup.
  8. 86Cobra

    post pics of 86 tail lights or cobra tail lights

    Yep, just buy some pinstriping from a parts store and make some. That's a LOT cheaper than the real SVO/Cobra tails. Here's the real thing on my 85 1/2 SVO: And here's the ones I made from 86 GT lights several years ago:
  9. 86Cobra

    Would I benefit fron stepping down to 24 lb injectors?

    30s are fine for that motor. When you get a blower you're going to need a lot more than 30s.
  10. 86Cobra

    What cam for my setup?

    Bad advice IMO. The E-cam has a CARB number to make it emissions legal. That doesn't mean anything. Emissions testers don't know or care what cam you have in your motor. Any of the cams mentioned in this thread will also pass emissions easily. And they'll make more power and drive better...
  11. 86Cobra

    F%#@ Gurus Help Me Fix My Car!

    Yep. Disconnect both the positive and negative cables and clean the terminals.
  12. 86Cobra

    What cam for my setup?

    Of course they "work." The motor runs so they work. The point is that there's a huge list of other companies that can sell you a much better cam that will make more power and be easier to live with in a daily driver. Most of the Ford cams were designed in the 80s. Modern lobe profiles are...
  13. 86Cobra

    Throttle Body how to decide what size

    www.flowtechinduction.com
  14. 86Cobra

    are these injectors to big?

    Yep, what Rick said. :flag:
  15. 86Cobra

    Throttle Body how to decide what size

    You should be running at least a 75mm tb. Also, PLEASE PLEASE don't put a pos b cam in that motor. You need a MUCH better and larger cam to go with those heads and intake. Call Ed Curtis and let him work up a cam for you.
  16. 86Cobra

    Is this a good combo for 300 rwhp or more?!

    With a good custom cam you'll have no problem seeing 300+ rwhp. The Track Heat actually has fairly short runners (12").
  17. 86Cobra

    Would 42# injectors be allright?

    36s would probably be perfect, but 42s will work with a good custom chip tune. Fuel pressure isn't the answer. I run 36s in my 306 at stock fuel pressure w/o any issues but I use a Tweecer RT to tune it. With a chip or a tuner like a Tweecer, you tell the EEC directly what size injectors...
  18. 86Cobra

    Why you use hardened pushrods

    You mean guide plates, not "hardened valve guides." Valve guides have nothing to do with pushrods.
  19. 86Cobra

    what kindof 60fts could this pull?

    I would say 1.7s. You don't have the power to get 1.6s out of it IMO.
  20. 86Cobra

    1.7 rockers on a stock 5.0-7/16 or 3/8?

    Stock heads are pedestal mount, not stud mount. Pedestal mount rockers use a 5/16" bolt, not a stud.
Top Bottom
Back
Forums
Menu