Search results

  1. R

    Need recommendations for a new clutch. Many ?'s

    i've got the centerforce d/f setup.get that and the fms adjustable clutch cable kit and you'll be set.i had the bbk cable setup and blamed the clutch for being too stiff but i switched to the fms setup and now it has a nice easy clutch.i've ran 8.32 on slicks so far and the clutch feels great so...
  2. R

    GT40X Heads (64cc) and F303. Piston clearance?

    i've got the gt-40x heads with a b-cam and 1.72rrs.that should equal your f-cam and 1.6s.mine clears fine.let me know how it runs because after christmas i'm going to switch to 1.6s and a f-cam.
  3. R

    1.70 vs 1.72 Roller Rockers

    i've got the gt-40x(64cc)with a b-cam.i switched to 1.72rrs with no problems except having to get a set of fms valve covers to clear the rrs.the car definitly ran better.it's worth it in my opinion.unless you have so some massive pistons or serious cutting of the block or heads you should be...
  4. R

    Those with GT40 setup or similar N/A, what is your fuel pressure & timing?

    i also run 18degrees and 40psi fuel pressure with no backfire or popping with my b cam and gt-40x heads.
  5. R

    Aluminum head durability in NA 306?

    i've got 2k miles on my gt-40x heads so far and not a single problem.
  6. R

    What to use...FMS "B" Cam or "E" Cam ???

    i've got a b cam and 1.72rrs and my car ran a 8.32 friday night.i like the b over the e.68 torino,my 306 idles fine and doesn't cut off and carry on.it idled just as good with my mild ported e7 heads and after i swapped to gt-40x heads.maybe you had something alittle off.i have a typhoon...
  7. R

    which rockers

    i just put a set of 1.72s on my car with a b cam.my stock valve covers hit on the sides and i had to buy a set of fms valve covers to clear them.you might have to shim them if you have too much lifter preload but on my gt-40x heads they were fine.stock cobra rockers might clear because they are...
  8. R

    which valve covers clear

    i've got a set of 1.72 pedestal mount rocker arms.they are the full roller style and my stock aluminum ones won't clear the sides of the valve covers.what valve covers is any one using that claer full roller rockers.also it's an efi motor with the typhoon intake.
  9. R

    What does this equate to in a 1/4 mile?

    my best 8.77 with a 1.96 got me 83 mph in the 1/8th.the track was so hot that day(100 plus degrees)that when i put slicks on it would bog the bog the car because the tires gripped to well.usually our track lacks traction but not that day.you should have a low 14,high 13 car.that's good for no...
  10. R

    which ford racing cam???

    i've got the b cam and like it.i first put it in with e6 heads,mass air conv. and cai with full stock exhaust and 3.73 gears.it helped alot.now i've went through alot more mods and it really needs more cam.the b and e are good cams for stock or mild motors but if your planning on heads or...
  11. R

    3.55 XXX 4.10

    if you have the stock t-5 it might not help.i have the higher geared t-5z and it heelped alittle going from 3.55s to 4.10s.
  12. R

    where to jackstand the car for SFC install?

    i've got the blueoval sfc and control arm package.they don't fit that bad,it all depends on what kind of damage or unibody twist the car has suffered.i have a drive up lift at work and my own mig welder so it wasn't that hard to make them fit.no they aren't as good as maximummotorsports or...
  13. R

    What drag radial are you guys running?

    i've had the bfg drag radials and the new m/t radial on my nova.the m/t kills the bfg,i never really checked mileage because when they wore out i replaced them.
  14. R

    Need help hooking up!!

    i've got the eibach lowering springs and they definitly don't help a car hook up.that combined with a set of kybs aren't for the d/s.
  15. R

    guys with 4:10s chime in.

    i've got a t-5z with the 2.95 first gear.i first had 3.55s and the car just felt like it was lacking something.i went to 4.10s and first gear feels better but it's srill usuable.with the .63 5th and 26 inch tires i can run 65mph on the interstate at just over 2100 rpms.i finally took it to the...
  16. R

    Blue Oval Industries is REALLY making me angry. Need advice

    i've been buying from john for over 2 years now.when he was smaller he had great customer service.as his business has grown it hasn't been as great.i had a recent problem with an order from him.i only live less than an hour away and most of the time i would drive and pick up my parts but because...
  17. R

    magnaflow or flowmaster

    i like my magnflow sound but the fit sucked.the left side fit decent but the right side sucked.i'm still using a stock h pipe too.
  18. R

    Which parts needed to switch to V8 brakes?

    yes,it'll definitly need an alignment.you'll also need new brake hose's and banjo bolts and caliper bolts.changed my 88 over to v8 brakes a few years ago and you do need to change the struts also.
  19. R

    About to kill the svo!

    i've got a crack free e6 if you need one.i'll ship it to your door for $40 if you need it.
  20. R

    87 Mustang heater problems

    you may have a bad connection in the instrument cluster.i was replacing my speedo head in my 88 lx friday afternoon at work.i didn't get it finished so i was going to drive it home with the cluster out of it.about 2 miles down the road i turn on the heater and the car bogs down awfully bad.i...
Top Bottom
Back
Forums
Menu