Search results

  1. B

    Sub Frame connectors and LCA recommendations....

    The dogbone has nothing to do with a driveshaft loop. It's sole purpose is to dampen vibrations in the pumpkin. Half the time, it's only good for ballast. <-- Stock gears, stock driveshaft, no dogbone, no problems.
  2. B

    those with H.I.D.'s

    You're talking apples and oranges. True HID (High Intensity Discharge) lighting systems are not simply bulbs. They are a headlight assembly utilizing an amp of sorts that create a near "white light" that is closer to daylight and is much brighter. They are on the BMWs and Mercedes, et al...
  3. B

    Anyone else ever hear of this???(cheap alluminum d/s)

    This was hashed out a couple years back. At the time, the cost of buying new U-joints, and having them installed with the yoke and pinion flange plus the cost of a decent junkyard shaft, rivaled the cost of a new FRPP DS. With the cost of aluminum way up (and the FRPP shafts along with...
  4. B

    Adjusting TPS

    :stupid: Stock engine managment 94-95 cars don't really allow you to set the TPS.
  5. B

    used fuel injectors???

    You're right. The Cobra computer accounts for the 24# injectors even with the same MAF as the GTs use.
  6. B

    u/d pullies affect chargingsignificantly??

    Technically the alternator will still be spinning slower since the crank pulley is larger, but no problems with charging should come of it. But honestly, I think the entire charging issue with UDPs has gotten really out of hand. A few people have had issues and now everyone is gun shy. If...
  7. B

    u/d pullies affect chargingsignificantly??

    The only time that the power windows/locks affect the electrical system is when you're using them. And my best guess says that the power used in the 5 seconds to roll up windows and 1/2 second to lock the doors is returned by the alternator within a second or two.
  8. B

    Tire Rubbing on Control Arm

    I haven't seen them for awhile but I know Steeda used to carry them. They aren't on the website but if you call them they can probably hook you up. Of course, the question really is, why is they're contact now and not before? What size tires are you running?
  9. B

    top speed?

    My comment wasn't about the Mustang being poorly suited for drifting. It was directed towards drifting being the gayest form of *cough cough* motorsports in recent history. Any event where the final score is based on the judges perception vs empirical data (i.e. a clock) isn't racing...
  10. B

    Using a 95GT to tow another mustang?

    The drivetrain will do it, but you'll need to install a class III hitch for that kind of towing and I've never seen one for a Mustang. Further, the rear mustang subframe isn't strong enough for it. You'd also have to swap rear springs to handle the increased load. So basically, don't do it...
  11. B

    Brake System Question

    If you mean the alignment gauge, yes. Here's the thread. For the most part, the booster (or vacuum canister) would remain the same. All it does is maintain an area of low pressure (vacuum) to assist in applying pressure to the system. As long as you aren't running a cam with insane...
  12. B

    Location of spout, TFI module, and diagnosis of my problem

    The spout connector is the grey piece of plastic. It pulls right out.
  13. B

    u/d pullies affect chargingsignificantly??

    I'm running ASP pullies and haven't had any negative side effects. Charging hasn't been an issue at all, even with a nearly 10 year old battery and stock alternater.
  14. B

    favorite place to shop

    Any specific types of parts you're looking for?
  15. B

    used fuel injectors???

    Buying used injectors is no big deal. Be sure to ask about the miles on them though. If they have quite a few, consider sending them off to have them professionally cleaned. If you don't have them cleaned, after installing them, run some injector cleaner through the system for the first...
  16. B

    Are all 5.0 smog delete pulleys the same?

    I've never had that problem. Personally, I think smog and a/c delete pullies are a ripoff. They're selling you something that isn't needed. Just reroute the belt to bypass all that crap.
  17. B

    top speed?

    It requires enormous amounts of mods to do properly. Stickers, neon, huge wing, etc. It's really for the professionals.
  18. B

    Does New England Drag Way hate people from MA?

    :rlaugh:
  19. B

    Brake System Question

    Brakes are nothing more than a hydraulic system. Hydraulics work off of the equation: F1/A1 = F2/A2 where F1 = input force A1 = input area F2 = output force A2 = output area By swapping calipers, you're changing the size (and usually number) of pistons in the calipers. This changes...
  20. B

    What Supercharger or Turbo for 94-95 GT

    I was thinking about that but that X brace is under the K-member. It wouldn't affect anything.
Top Bottom
Back
Forums
Menu