Search results

  1. bmo37

    tremec 3550 + 3.73 gears= dissapointment???

    don't know about you but my first gear with the t5 was basically nonexistent, sometimes would drop the hammer into 2nd from the start. for a street car i acutally like having a little longer first gear which my tko500 does from me now, especially with the boost all I used to do was breakem loose...
  2. bmo37

    Door lock actuators

    http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=330-010 go here thats what i used 4 bux each
  3. bmo37

    performance distributor or MSD

    i like my msd really nice quality, even on the electronics on the inside, was the only thing that solved my missing at high rpm.
  4. bmo37

    Vortech Bypass Valve ... Is This Right?

    your going to need a discharge tube that has a bypass valve bung built into it. same as with the inlet tube. the bypass valve has 3 connectios the high pressure side (discharge tube side), low pressure side (inlet side) and the vaccum fitting that goes to a vaccum source.
  5. bmo37

    Vortech Blower

    do you have a bypass valve? if yes than i guess some sort of vaccum leak than
  6. bmo37

    TKO questions and tko clutch questions

    make sure you know wether the input shaft is a 10 spline or a 26 spline before ordering the clutch. I have a spec stage 3 and it owns but you siad u don't like them so get a dual friction centerforce. also upgrade to a aluminum clutch cable quadrant. as far as i know clutch isn't balanced...
  7. bmo37

    Trick Flow ADMITS they didn't put a baffle in my INTAKE!!! OIL GUSHING OUT PVC!!!

    typhoon comes installed already new. how about those china parts lol
  8. bmo37

    Has anyone ran their supercharger oil return straight to the oil drain in the pan?

    yep if you read the directions it has to be above the oil line otherwise the supercharger won't drain and it will overheat
  9. bmo37

    Got rid of my skinnies and i couldn't be happier.

    lead singer of a band call strapping young lad. lol dead on, got balls rocking that hair. anyway i agree with everyone else skinneys look badass on the car but on a street driver they suck big time, hita pothole and your done for.
  10. bmo37

    $1400, what now?

    i say send it to me, paypal account is [email protected] if not than I say go with whats broken first than work your way up to the performance stuff, odds are the cooling issue is the t-stat but if its not, i'd go for a new aluminum radiator and high flow water pump after making sure the stock...
  11. bmo37

    Frame shops think suspension is causing lean?!?!!?

    dumb question but who knows, you sure the pig tails on the springs are facing the right way assuming you have non-coilovers.
  12. bmo37

    broke something that plugs in trans

    sure
  13. bmo37

    broke something that plugs in trans

    driver side oil pan is the low oil level sensor, the oil pressure sensor is feed into the block itself to the left of the oil filter, behind the timing cover
  14. bmo37

    Driveshaft Vibration - New Alum or ReBalance???

    your going to need a 12pt 12mm 3/8 socket, than at sears buy these things called socket caps 3 pack, tan using the socket cap and a box wrench start on the bottom one, your going to have to put the car in gear and set e-brake. In order to break it loose you'll need to actually kick the wrench...
  15. bmo37

    FMS Aluminum driveshaft=GOOD

    I forgot where i read that but believe it or not its actually said that too, even road dust and dirt that gets caked up on there, if not removed it said it can cause the driveshaft to virbate at higher rpms. Think it was a chilton or haynes manual. Just an idea but the u-joint sounds more common.
  16. bmo37

    Markings on stock cam??

    I looked at my stock cam out of my 93 and it has the same ZE marks on it thats it.
  17. bmo37

    FMS Aluminum driveshaft=GOOD

    ford actually switched vendors for making there driveshafts so there are older ones and newer ones (which are made by different companies hence the price increase from $159 to $259) as far as the aluminum driveshaft goes. Also a thought, the factory drive shaft is balanced, but after driving...
  18. bmo37

    Engine Plate???

    Seems my stock engine plate (goes between the block and bellhousing) has actually vaporized, I'm not kidding actually cracked and turned into a powder in some areas. The problem is i have no clue where to buy this thing at, i searched the net and no one has them. I really don't want to goto the...
  19. bmo37

    Larocca's is NO GOOD AT ALL!!! STAY AWAY

    I remember reading your first post about this, its really a shame cause this guy has all kinds of buisness because of his racing reputation (EFI renagade champion), if you ask any one in jersey or new york, hell even the whole east coast who the best tuner in the east is and the answer you'll...
  20. bmo37

    Which is better Vortech or Paxton?

    your funny because you stangnet status is officially addicted and your avatar is towely lol
Top Bottom
Back
Forums
Menu