Search results

  1. Zinc001

    Steeda intake MAF size

    The Steeda comes with an 80MAF
  2. Zinc001

    Cervini Hoods and How They Fit/Paint

    You need to remove the plastic cover over the latch and rad area to get to the bolt that will loosen the latch so you can move it side to side. Also the four bolts that attach the hinges to the car(not the four that go into the hood) are the ones that you loosen to move the hood around. If you...
  3. Zinc001

    White Face Gauges

    No, they slip on over the needles. Also a bonus. Here's a pic, not great one though
  4. Zinc001

    Cervini Hoods and How They Fit/Paint

    No, they use the same paint as on the outside. I have the same hood. It's in the paint shop getting done now. The fitting is a bit of a pain to get it just right. I had to move my hinges, latch, and quarter panels to get it perfect. At first the latch was too far to the right causing the...
  5. Zinc001

    White Face Gauges

    I was concerned about that as well. Went with El-glo and they look great. Switchable between green and blue.
  6. Zinc001

    Bullitt suspension

    Here's a few pics of mine with Bullitt springs and brakes. Doug
  7. Zinc001

    Least Expensive 4.6L Supercharger?

    Two letters....T&J. It says it all!!! :nice: Doug
  8. Zinc001

    T&J Performance kick *ss.

    :rlaugh: :rlaugh: :rlaugh:
  9. Zinc001

    Just ordered my mongoose kit

    Welcome to the Clan :nice: Doug
  10. Zinc001

    Just got back from T&J

    :rlaugh: :rlaugh: :rlaugh: :rlaugh:
  11. Zinc001

    Drilled/slotted rotors

    I've been running FRPP drilled/slotted for a year now. Haven't babied them at all and run in solo 2. So far no cracking has appeared. The prevent rust I masked off the area the pads rub on and painted them with silver exhaust manifold paint before I installed them. No rust at all.
  12. Zinc001

    octane boosters

    When I was having problems it was Tim who told me about Torco. Deadly stuff.
  13. Zinc001

    octane boosters

    Another vote for Torco. It's the only stuff that I have tried that actually works.
  14. Zinc001

    Intercooler vs. Aftercooler

  15. Zinc001

    T & J's Mongoose Kit or Kenne Bell

    Yes Tim did do a tune on a GT with the KB blower. Made BIG power. I forget what the tread was called but I'm sure it was on Modular Mustang Forums. Doug
  16. Zinc001

    Some NAIAS pics from the other night

    set up an account for free at http://www.imagestation.com/ Then you can link to them as (&) said . As many as you want or as big as you want. Doug
  17. Zinc001

    Plenum results on the way!

    :hail2: :hail2: :hail2: A job well done!!!!!!!!! Thanks
  18. Zinc001

    Micool's Car Gets New Numbers

    It just goes to show that T&J has these modulars figured out better than anyone!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :hail2: :hail2: :hail2: :hail2:
  19. Zinc001

    went to the track, think i broke an axle

    You would have to remove the brake caliper to do that. :nice:
  20. Zinc001

    3 valve head swap

    You may also need new pistons as in the pictures they have reliefs cut into them to clear the valves.
Top Bottom
Back
Forums
Menu