Search results

  1. Darek78

    Mr GRADY.........and all (Tweecer)

    No i don't have any head's yet i'm planing on geting some AFR's 165 or if i get lucky i'm planing on getting a 347 but that is a dream for me now :D now i just need to get my car running right as soon i get a chance i will try messing around with stock maf and slopes and i hope it will work...
  2. Darek78

    Mr GRADY.........and all (Tweecer)

    so i should take off the C&L maf of put on the stock one and load the cobra 24lb maf transfer or should just leave the stock maf transfer and try changing the injector slope's ???:shrug: Thanks Derek.N
  3. Darek78

    Mr GRADY.........and all (Tweecer)

    it's a 95 GT 5 speed with ,BBK shorty's, Mac X pipe,flowmaster cat back,Steeda #19 cam ,1.6 roller rockers, adj fuel pressure reg,BBK 190lb fuel pump,cobra intake, 70mm T-body, bbk cold air intake,24lb injector's, C&l 73mm with a calibrated orange tube for the injectors and a good tune up and...
  4. Darek78

    Mr GRADY.........and all (Tweecer)

    Ohhhhhh well i tryed to put injector slope's for 24 lb on the tweecer and when i starded the car it ran like crap i could floor it and would not go any were it mad some poping noise and bug down very bad so after that i added maf calibration for cobra and still no luck :bang: y is this thing...
  5. Darek78

    Mr GRADY.........and all (Tweecer)

    Ok thank's guy's i will try doing that see how it will work on my car plus i know that there is that setting for C&L 73mm but if i remember correct it said for green tube :shrug: will it make any diffrence??????????? Thanks Derek.N
  6. Darek78

    Mr GRADY.........and all (Tweecer)

    but if i use that maf transfer for the 24lb inj i still have to change the slopes in the scalar section in the tweecer??????? Derek.N
  7. Darek78

    Mr GRADY.........and all (Tweecer)

    Ok i just got my 24lb injector's installed and i got a C&L 73mm and i put in a calibrated tube orange color :)( using a stock maf sensor) My Q is do i have to change injector slopes on my Tweecer R/T or i can leave it on the 19lb one's????? or it would be better to change them :shrug: does...
  8. Darek78

    How does flowmaster sound with X-pipe ??????

    thanks but some people say you should not use X on chamberd muffler that's y i'm asking if it's not going to sound funny :shrug: thanks Derek.N
  9. Darek78

    How does flowmaster sound with X-pipe ??????

    Hey guy's i would like to know how the flowmaster's would sound with X pipe ??? Right now i'm running BBK shorty's and mac H pipe with cat's and flow's and i gor rid of my emision stuff and i'm looking to het something cat less and i was thinking X pipe ??? thanks Derek.N
  10. Darek78

    No polution pump!!!! with cat's on ?????????( help)

    So that's y my car buck fires and has no power first thing tomorow my car go to the shop Thanks i just hope that you are right Derek.N
  11. Darek78

    No polution pump!!!! with cat's on ?????????( help)

    Hey guys i just pick up my car from the shop :) I had a new cluch put in (Center force) I notice that problem before but now it's geting worse and worse the car has no power it's like somthing holding it back and somtimes i get like back fire if you can call that like 2 or 3 poping sound...
  12. Darek78

    Tweecer......

    Thanks Kris i will try that tomorow and see if it works thanks ALOT guys for the Help :spot: Derek.N
  13. Darek78

    Tweecer......

    THANK YOU THANK YOU :hail2: It's ALIVE the A9L thing was wrong now my EEC nobmers are right :) I made idle RPM change and Fan temps and i wrote it to tweecer in position 1 starded the car and runs good and the fan is going on at the temps i changed to :banana: Now the Fun begin's this one...
  14. Darek78

    Tweecer......

    so you want me to change the strategy on the bottom of the page right???? and see how it will work out i just E mailed tweecer the guy is trying to help me out with the unit i told him that i had cleaned it again to have a good contact he said that i shoul try just pushing the tweecer to the...
  15. Darek78

    Tweecer......

    Ok here are 2 pictures This is what i get after reading the EEC after second time of cleaning connetcions on the j port [/IMG] [/IMG] Derek.N
  16. Darek78

    Tweecer......

    Ok guy's thank's for all you'r help but i had it with this pice OFF $hi? :mad: Today i had time to take this crap out and clean it again and i did not have it cleaned good enough but this time i'm sure the connections are clean i useed a minature file to sand it down i did not damege anu...
  17. Darek78

    Tweecer......

    grady so you say that payload is for data logs .So if i check 16 positions and save in to the payload and then try to datalog my dashboard should show me some reading's??????? did i get that right?????? plus when you said to just make a change in the rpm range i know what you mean that's what...
  18. Darek78

    Tweecer......

    ok the programs that i'm using are CalEdit v1.30A9 CalCon v1.0A7 i just downloaded them from tweecer site i even put fresh comy o windows PRO on the laptap i need more info on the payload thing on the rite side it says Variables for RT datalog payload so let say i want to change my rpm idle...
  19. Darek78

    Tweecer......

    Man i was cleaning that thing like 30 minuts from the white resedue with alcohol i did clean both sides and i pressed the tweecer all the way in and i shimed it araund and used some clear packing tape to hold the tweecer nice and tite if you say i should take it out and do it again i will try...
  20. Darek78

    Tweecer......

    tell you the truth i'm still lost with the tweecer i did get some idea how it works but i guess not enough yet :nonono: there are times that i feel like i did a wring thing spending all that money on something i don't get who ever made the program for tweecer didin't do a grate job making...
Top Bottom
Back
Forums
Menu