Search results

  1. kboy262

    which tires

    i say use the Kumhos. I have them on my rear wheels. I can't rotate them because of size differences, but they last pretty good. Plus I have seen them for less then a hundred bucks a piece. I bought my 275/40 Kumhos for $122 a piece.
  2. kboy262

    4.10's just installed((WHOA!!))

    A buddy of mine (Coramprat) had 4.10 with the T45. He did the 23 tooth sprocket thing and it helped but it still is inaccurate. The only way to totally correct a speedo ina 96-98 GT or cobra is to use the speedcal. It bothers some people and others aren't worried about it.
  3. kboy262

    ADVICE

  4. kboy262

    driver side front sits lower?

    It can probably be your spring insulators. You might have one worn more than the other. Also maybe the position of how the spring is in its perch. It can a lot of things.
  5. kboy262

    where should I buy the vt stage 1 cams from?

    Definetly get them from T&J. Also the install is easy. I had to put Comps in mine because VT does not have them for the NPI heads. Anyway get the stage 1. You do not have to put springs, but you can. It is up to you. Install for mine was roughtly 2 hours. A buddy of mine who had cams in...
  6. kboy262

    No spoiler on deck. Pics?

    Thats exactly what I was thinking but still looking for pics.... :D I got some pictures of it. I will try to post them up. If not I could email you the pictures.
  7. kboy262

    ADVICE

    Why would you put a smaller pulley on a 99 cobra? Anyway do the gears. The catback thing is up to you. To save some bucks just do some weld-ins. For a good mod I would get some cams. Look at the VT stage 1. They make good power and will work great with some gears (4.10) Next maybe a...
  8. kboy262

    installed vt stage 1's today

    Awesome. I thought the cam install was easy to. You must have used the Anderson tool. Makes thing a whole lot easier. When I did mine it took roughly 1.5 to 2 hrs total. And that includes BS'n around. Enjoy that nice lopey idle.
  9. kboy262

    No spoiler on deck. Pics?

    Took mine off over two years ago. With the Sportline springs and 17x10.5 in the back it gives a nice clean look. For now I am using stainless steel carriage bolts with a thin piece of rubber. And just used touch-up paint from Ford to help blend it in. When the car is painted I will have them...
  10. kboy262

    mac straight shot installed

    I believe the difference between the stock MAF and the MAC version this that the MAC one is shorter. I will upload the picture of the problem I had with mine tomorrow.
  11. kboy262

    MAC straight shot installed

    I think I was the first one to complain about chopping up the elbow last week. I have a picture of why it won't fit right. I just keep forgetting to upload it. What happens is when you mount the airfilter and MAF to the body(fender) and connect the elbow to the MAF, it ends up placing the...
  12. kboy262

    To Dump or Not to Dump??

    If you do dumps be prepared for major drone and vibration. I have done dumps with a Bassani X-pipe and a o/r H-pipe. It will be loud in the cab at lower rpm (1000-1800)
  13. kboy262

    PI Intake Adapter Plates HERE

    The plates are identical to themselves.
  14. kboy262

    4.10's just installed((WHOA!!))

    You should be around 2550 rpm at 70 mph with the 4.10 and T45. To be honest with you thou the 23 tooth sprocket will not completely correct your speedo. I would just get a speed cal. The teeth from the 23 gear will get eaten up over time.
  15. kboy262

    mac straight shot installed

    When I put mine in I ended up chopping off 1.25" of the inlet tube to get it to fit. It looks good thou under the hood.
  16. kboy262

    Getting a h-pipe...is this worth it?

    I went the o/r route, but since you live in Cali. you need the emissions. There are no hangers for it. And the O2 boss is where you screw in the O2 sensors. There should be four of them. Enjoy the new sound you will have.
  17. kboy262

    Just did my PI intake swap!!! PIX

    So I take it you switched out the crossover.
  18. kboy262

    Do YOU run an O/R H Pipe? - Step Inside

    His two midpipes came from me. I orginaly had the o/r H-pipe then I sold it to him when I got the Dr. Gas X-pipe. From there I went to the prochamber, and then to the Bassani o/r X-pipe. Now lets just say he has the prochamber now and I am back with my original MAC o/r H-pipe. The H-pipe...
  19. kboy262

    What Should Be My First Mod?

    I guess my bottom-line question is twofold: 1) What would be the best bang-for-the-buck first mod for a stock 01 GT? 2) What would be the best first mod if cost were not a consideration? Whatcha think? Gears for the first question and gears again for the second, well maybe a blower.
  20. kboy262

    Tranmission...

    What he said.
Top Bottom
Back
Forums
Menu