Search results

  1. blackink00

    No fuel, Need help ASAP

    its definitly your pats then. theres nothing you can do but take it to the dealership and have them reprogram the key. if you have a spare try it first but your gonna need two keys to have them program them. your car should be fine after that. guess your pats had a fit and decided to loose...
  2. blackink00

    need alot of input by monday

    yeah ill be doing the whole build. the only thing im sending out is the block and heads to have them bored out and have the valve seats 5-angle cut. the eagle kit was 2300 with a balanced kit from summit. thats where im getting the 2300 is my budget. im also open to any other kit around that...
  3. blackink00

    No fuel, Need help ASAP

    just follow the line and look for kinks or something. maybe try to blow compressed air from the filter out to the fuel rail. a fuel pump driver shouldnt do this
  4. blackink00

    No fuel, Need help ASAP

    thats not the problem and with the fuel rail up and turning the key on fuel shouldnt shoot out of the injectors unless the engine is cranking. i would check the crank position sensor.
  5. blackink00

    need alot of input by monday

    well i am ordering my stroker kit and i need some input from you guys. as much as i can get. im kinda torn between different kits and my budget is gonna be $2300. i have been looking at eagle performance kit. eagle forged crank eagle h-beam rods eagle pistons modmax stroker kit...
  6. blackink00

    spark plug gap for nitrous?

    ngk tr6 at .035 gap. never had a single problem
  7. blackink00

    Horsepower Guess

    if its still npi heads i will say 243rwhp 272rwtq. hope im wrong but just being realistic
  8. blackink00

    guessing game!!!

    i spray around 2700 and im liking the numbers:D should i guess at my own game?
  9. blackink00

    guessing game!!!

    well i figured we should start guessing and see who is closest to my numbers when im done with my build. guess for both NA and a 150 shot. my mods are. forged rotating assembly 5.0L P&P PI heads with 5 angle valve job comp 278 cams PI intake w/ 78MM BBK throttle body and plenum JLT intake...
  10. blackink00

    Question for certified ASE mechanics

    out of uti and working at ford now i make more then 17 and less then 19 an hour :D i got a good amount of certs right now. our techs are making about 25 an hour tho. i dont have any ase cause ford doesnt really care like said before. flat rate is tough especially if your new cuz you dont get any...
  11. blackink00

    guess ill show you guys what im doing

    we should take guesses on how much power when im done. :D N/A and with the spray 150 shot
  12. blackink00

    guess ill show you guys what im doing

    well heres an update and showing my porting so far. its alot of fun but very tedious. and you get aluminum power EVERYWHERE!! put still a def improvment so far. left is ported and right is stock.
  13. blackink00

    guess ill show you guys what im doing

    porting takes soooooo much time!
  14. blackink00

    Lost 7 gallons of gas to the mean streets of az

    nope gotta pull the tank. the neck is long and goes into the tank pretty far.
  15. blackink00

    guess ill show you guys what im doing

    you guys know much about eagle stroker kit? its all forged and thats the one i went with
  16. blackink00

    guess ill show you guys what im doing

    4.7 is to small. im going stroker. 5.0l modular ftw!
  17. blackink00

    Lost 7 gallons of gas to the mean streets of az

    yeah its a dumb design ford tried out.
  18. blackink00

    guess ill show you guys what im doing

    yeah been busy and kinda got outta touch but i guess im back now. graduated school and now work at ford so i have the tools and stuff to do all this :D the only thing that im not doing to the build is the 5angle job and having the block punched out .020 over!
  19. blackink00

    guess ill show you guys what im doing

    well heres what ive been hiding and doing. i guess i joined the crowd :D im porting the heads right now. got the cams and rotating assembly on its way. went with comps 274's. stroker kit and then im gonna bump up to a 150 shot!
  20. blackink00

    The old Nigerian SCAM...with a twist

    bump. any new info?
Top Bottom
Back
Forums
Menu