Search results

  1. Jerry Leaming

    Stupid high speed vibration

    Its the second drive shaft, both had new ujoints. I purchased the tranny new quite a while ago but it was new when I bought it.
  2. Jerry Leaming

    Stupid high speed vibration

    The bellhousing is indexed according to the instructions sheet and is the best I can get it....it is at .002 thousands out which is pretty good. Plus wouldnt that cause a RPM imbalance? Mine is a MPH/ transmission output speed imbalance. I really need to find out why the TKO is causing the...
  3. Jerry Leaming

    Stupid high speed vibration

    Mine has a Mcleod scatterproof unit....and it is centered properly from what I can tell. Either way it doesnt vibrate when the DS is disconnected so it cant be the Motor or Tranny...or can it?????
  4. Jerry Leaming

    Stupid high speed vibration

    I did verify the bellhousing is where it needs to be....I think it was .002 out. I really cant believe Im missing something....just seems to easy, I mean pull T5 tranny, install new 26 splined clutch, change yolk and rebalance DS, install new TKO (shimmed up as hi as it will go), reinstall...
  5. Jerry Leaming

    Stupid high speed vibration

    No spacer just a custom made steel unit....I have tried a FMS aluminum DS both with and with out a spacer and no difference, but I also sent the Aluminum one back because it was out of round by 50 thousands. The tranny angle can only be fixed by lowering the motor (which I cant because my oil...
  6. Jerry Leaming

    Stupid high speed vibration

    So I pulled the Drive-line completely out of the car and ran it with just a cap in the tranny....vibration is gone. So I have it narrowed to behind the tranny. While under there I also lowered the rear end and lined all the u-joints/drivetrain up so that they where in perfect line. And it still...
  7. Jerry Leaming

    Stupid high speed vibration

    I guess thats kind of reassuring its not just an install problem on my end.....too bad its not something simple. Ever hear of anybody cutting and redoing the tranny tunnel to make it fit, sure seem like it would be a lot of work.?
  8. Jerry Leaming

    Stupid high speed vibration

    I have a vibration in my 94 351w, Tremec TKO, 3.90 gear ratio equipped mustang that I can not narrow down. The vibration starts at about 70-75 mph and gets worse the faster I go. I have heard that the TKO swap could cause problems because of the size of the tranny doesnt allow for the unit to...
  9. Jerry Leaming

    Leather Corbeau TRS seats

    SOLD!!!!
  10. Jerry Leaming

    94 GT wheels 17" (stock)

    94 GT wheels 17" *Price lowered* For sale are 4 17" tri spoke wheels off of my 94 GT. They are in really good shape. They do have some very light road wear (rock nicks and small scratches) but arent bent or tore up in anyway. They include two stock (17 years old) tires on two of the rims and...
  11. Jerry Leaming

    Leather Corbeau TRS seats

    Leather Corbeau TRS seats *Price lowered* Black Leather Corbeau TRS seats with brackets for a 94-up (sn-95) mustang for sale. They are in really really great shape with only minor rub marks on the drivers side bolsters.And are a really nice upgrade over the stock seats! I am located in Olympia...
  12. Jerry Leaming

    Dragstrips...

    I race at bremerton and will let you know when I will be going...there is usually a thread started before race day.. I also live in olympia
  13. Jerry Leaming

    3:55's, 3:73's or 4:10's ??

    AFR's suck tons of air and make tons of power. 3.90
  14. Jerry Leaming

    for those interested in the hood pics..

    Nice...
  15. Jerry Leaming

    Shorties or longtubes ??

    One of the magazines compared BBK longtubes agianst short tubes (equal and unequal) on a 400 plus hp engine. To my surprise they found very little difference between the 1 5/8" headers and if I recall right the short tube unequal headers seem to beat out all of them by a few HP. Now I have...
  16. Jerry Leaming

    Can you hold your liquor

    74 but it took about 10 tries.
  17. Jerry Leaming

    can someone tell me how...

    Check your return springs if they are not attached to the same spot as they were before. That will cause different throttle pedal feel.
  18. Jerry Leaming

    95 GTS vs 911 Carrera

    You might have a chance if you take out your, seats,carpet,console, spare tire, stereo, and everything in the interior. And you will need to remove your a/c, power steering, and air pump. Then remove your side and rear windows, your spoiler and gound effects and anything not welded to the car...
  19. Jerry Leaming

    unassembled afr 165's?

    185's are the same price as 165's. Cobra 1.7 rr fit under stock valve cover 1.6's take some massaging to fit. The spring package should be fine just check piston to valve clearance. Also depending on how much power you want 165's unported will do just fine
  20. Jerry Leaming

    where can i get this?

    Call MAC directly.they offer just part of the cai kit. Thats how I got my new tube and blue rubber tubing.
Top Bottom
Back
Forums
Menu