Search results

  1. perkys stang

    Any Company Sell a 2 1/2" Catback kit with no Muffs?

    Look for a company called.. Asphalt Jungle "Cat-back System" with or without mufflers.. I have seen there ads in MM&FF before.....
  2. perkys stang

    shaving/milling ring gear, whats the deal.

    if it's just a weekend warrior then no the money can be spent elsewhere.... Like Rickki said it's not cheap if you want to do it.. The price listed are what I basically paid to get mine done.. Factor in other axles upgrades and you just spent 500+ on removing just weight.. The 5lbs on the...
  3. perkys stang

    ENGINE BUILDER SAYS i BETTER DO THIS!!

    yeah.. I was going to mention.. Maybe atleast a 30lb injector and a 75mmTB if you haven't bought one yet... Thing should make some sick power..
  4. perkys stang

    Any better than UPR?

    One day you will hear a pop.. that will be the stock plastic piece breaking.... I prefer the UPR piece but that might be because I am a dealer.. Most of these piece are all the same so price should be the main consideration once you look at both..
  5. perkys stang

    Would I benefit fron stepping down to 24 lb injectors?

    What he said.. and then some..
  6. perkys stang

    Easiest 100HP i ever got!

    please don't post this crap in TECH!!!!!!!!!!!!!! :lock:
  7. perkys stang

    UPR xpipe - any good?

    We used one on the 03 cobra and it fit great and worked fine.... :nice:
  8. perkys stang

    Some one with Edelbrock heads please help me

    Do your self a favor and buy new springs when you get the cam... ed can set you up with a set.... Seat pressure is what they are looking for....
  9. perkys stang

    Questions about Roller Rockers (Mainly TFS)

    I have the TFS 1.6 rockers on my TFS heads and never had a problem.. they are the same..
  10. perkys stang

    ENGINE BUILDER SAYS i BETTER DO THIS!!

    yeah.. I would stick with the 7/16 for sure... The step washers work great
  11. perkys stang

    Need opinions about heads.

    I would stick with the 165's.. I like the 185's also if you want to plan for the future.. That will all depend on what you want to do..
  12. perkys stang

    what gear oil for t5 ?

    most T5 don't liek the syn. atf's.. Not really sure why but they usally destory after using it.. :shrug:
  13. perkys stang

    4 bolt main caps?

    Well that block bare new is $1500-$1600 plus 500 or so the machine and get ready so thats $2000-$2100 for just the block... I figure atleast $1500 or so is a decent price. What are you planning to uild this could be overkill but then again this could be the last block you will ever need to buy.
  14. perkys stang

    4 bolt main caps?

    Maybe a A4 block? Which in that case grab it if it's a good deal... Those blocks are as beefy as it gets.. and yes std bearings work.. They are based off the diameter
  15. perkys stang

    5 Lug Guys, NC brackets, pics good stuff!

    ouch!!!
  16. perkys stang

    5 Lug Guys, NC brackets, pics good stuff!

    Are those brackets Aluminum I hope :) Nice plates.. :nice:
  17. perkys stang

    My friends trapping 118mph but 1/4 mile times are a bit down.

    11.40-11.50 range if he can get it to hook.... Also depends on the weight of the car.. ;)
  18. perkys stang

    ET Streets won't pass PA inspection will they?

    I thought I read on the PA site that any car driven under 5000 miles per year does not have to be tested?
  19. perkys stang

    ET Streets won't pass PA inspection will they?

    So where is your shop??? ;) i know I was told by a MD cop that he didn't care what the side said he felt they were unsafe and shouldn't be on the road and made me park my car.. good thing I had other wheels to swap to cuz he wanted to yank my car :notnice:
  20. perkys stang

    Anderson N-91 Cam?

    yeah that's it but mine was .576 on the lift
Top Bottom
Back
Forums
Menu