Search results

  1. Bullitt347

    North East SSoM Members!!!

    North and West of Bangor.
  2. Bullitt347

    Suspension Quad shocks

    I used to own a Mustang specialty shop. From 1994-2002. Worked on and modified a ton of Foxbody Mustangs, SN 95's and SN 97's, Basically any Mustang up through 2002. We removed the quad shocks on every Mustang that got upgraded rear suspension components. Everything from street/street strip...
  3. Bullitt347

    Oh boy!

    I am sure part of the problem is, this is such a rural area, there are not enough voters to make it worth their while. Gotta give attention to where the taxpayers are, that is the focal point of their attention. They just don't GAF about a handful of rural voices. They can :poo: on us all day...
  4. Bullitt347

    Oh boy!

    Same here. You don't get pulled over for an expired tag, it is a secondary offense. Plus the fine is usually about half what it cost to register the vehicle anyway. This area is rural enough, that the only enforcement is from the Sheriffs Dept as none of these small towns have their own Police...
  5. Bullitt347

    Oh boy!

    I have written letters to both Senators and the Congressmen in my State. Multiple times. Every single time I get a Form letter in reply that does not address the questions or comments I have. Not even close. It is a waste of time to write to the representatives in this State. In reality, they...
  6. Bullitt347

    What Oil Viscosity for Southern California Car?

    Stock was 10W-30 I believe. That should be sufficient.
  7. Bullitt347

    Stroking a Mexico 289 or newer roller 302

    I would wait to see what the 289 measures out at. If it is already .040 over, the current cylinder wall wear may put the block out of reach to get the new piston to cylinder wall clearance. Or it may check out OK. Verify first, then make a more educated decision.
  8. Bullitt347

    North East SSoM Members!!!

    I don't have a street stang, just a 89' Mustang racecar But at least I live in Maine. Lol.
  9. Bullitt347

    North East SSoM Members!!!

    What does SSoM stand for?
  10. Bullitt347

    Cooling Jacket Pitting Idea's?

    If this were my engine, in a car that was not being raced, but a daily driver that was used for normal driving, I would clean the cylinder head and intake gasket surface thoroughly, lay a bead of Permatex Ultra Grey around the coolant port, use a good Fel-Pro gasket and bolt it together and...
  11. Bullitt347

    1965 mustang 351 850 hp+ primary tubes 1 7/8 or larger and a 3 inch or larger collectors?

    His user name is 427nostang If it has a 427W and has NOS it is easily able to make 850 HP.. And a Nitrous engine likes a free flowing exhaust system. I am not going to discredit his claim just yet. Pic's would obviously help a bunch. And a 427W on N02 should probably get custom made headers...
  12. Bullitt347

    Fox price for fuel

    $3.54 for 87 here. And I can almost see Canada from my backyard Lol.
  13. Bullitt347

    Fox price for fuel

    Nothing new. He said in Feb it would only take 2 weeks. Kind of like 2 weeks to flatten the curve with the covid BS. Gas prices here have been steadily falling for the last 4 weeks. I don't see a "sky rocket" in prices at all. Do yourself a favor and turn off the news. Your life will get much...
  14. Bullitt347

    2001 cobra ignition timing off

    Sounds like the timing chain/chain's jumped time. There is no external way of adjusting ignition timing. It is all done by the Powertrain Control Module.
  15. Bullitt347

    Suspension Is somethig Wrong Here?

    I clock the springs so the end of the lower part of the spring is facing forward, not rearward. Basically the opposite of how you have yours installed.
  16. Bullitt347

    Shared sales ads (cars, parts, etc that are NOT your own)

    Cobra R Only 107 made.
  17. Bullitt347

    CHANGING BRAKE PADS

    In the kit that FastDriver posted, you will notice two turning mechanisms. One is left hand thread, the other is right hand thread. Are you sure that you are turning the piston in the right direction? It may be a left hand thread piston. I have run into that before. One other thing to look at...
  18. Bullitt347

    BBK Long Tube Headers Rusting

    Scotch brite pad, green one. Should clean it up quite nicely. That is all surface rust and should come right off.
  19. Bullitt347

    What's your tow rig?

    2001 F-250 Super Duty 4X4 XLT Lariat. 6.8L V-10. Currently has 140K miles. Installed Torsen Differentials front and rear. JBA headers and the rest is Banks Exhaust from headers to tip. Weight distribution hitch with sway control. Triple Axle 24' Trailer. 12,000 lb winch up front in the trailer...
  20. Bullitt347

    Progress Thread Nicholase "lights out" build-

    How does it drive? Should be a Hoot!
Top Bottom
Back
Forums
Menu