Search results

  1. J

    Extra Plug Wire?

    some performance plug wires will come with extra coil wires sometime. not everbody runs the same type of coil or distributor cap. this is what i think.
  2. J

    New toys came in today *PICS*

    fine then, i'll whore some more pics too then...
  3. J

    auto and 5-speed computers the same for MAF conversion

    there are numerous MAF computers to choose from, but i think the most prefered are the A9L and the A9P. The A9L is for manual trannies and the A9P is for autos. if i remember correctly, one of those will also work with the other type of tranny.
  4. J

    New toys came in today *PICS*

    76mm with .96 A/R. heres one with a soda can for ya
  5. J

    What all is needed for a H/C/I Install?

    got a torque wrench? mite need a balancer puller. rent it from the local parts store.
  6. J

    Show me a pik of your Taurus elec. fan...

    no good? i can't say that cause i never had it on my car long enough to tell. once i realized it wasn't the right fan, i was looking for the 3.8 fan instead. i do have the 3.0 fan on my 4 banger DD car. it does a fine job cooling that thing, but it does have 4 less pistons.
  7. J

    where to buy step washers for 351 heads on a 331?

    edelbrock, trick flow have em. dunno who else.
  8. J

    Fuel rail install question?

    i think UPR makes em. pricey cause i think they want like $60 for em. i also though that summit had em as well. check summmit number rus-640870 and rus-640880. see if those would work for you. also in the summit catalog in the mustang section.
  9. J

    Show me a pik of your Taurus elec. fan...

    more than likely you have a 3.0 taurus fan. the 3.8 fan has three wires for it, ground, low ,and high. they also look completly different. fist pic is a 3.0 or at least general look of it, the second is of the 3.8 and the style i myself am using.
  10. J

    can u roller rocker on stock clyinder heads..

    if you mean E7's, yes you can. they use a pedastal style rocker. just buy a good set, check for shimming if needed. i my self do not have this style rocker, so i cannot really help too much more.
  11. J

    Trick Flow Upper Intake T/B Bolts (4)

    it uses a standard thread. 5/16 i think. -18 or -24 thread i forget. i just went to the hardware store and got a piece of all thread and made my own studs.
  12. J

    Swap headers not working

    how old are the motor mounts? if they are somewhat old, new ones may help by raising the motor up some. you can also put some washers in between the mount and the k-member as well.
  13. J

    What size injectors?

    i guesstimate 24#'rs
  14. J

    Bummed out - Need 5.0 Help

    so are you saying the starter is turning the motor over? is it turning at the normal speed as to if it was to start, but just won't. or is the starter spinning and not engaging the flywheel? just that whirrrrr sound.
  15. J

    Canton, Milodan, Moroso? WHICH ONE????

    here are a couple pics of my canton.
  16. J

    where to get a timing chain set locally

    they should have timing sets. if they say they don't, i suspect the counter person doesn't really know anything. have you tried online at advance auto or autozones web site? i did it for you: here http://www.partsamerica.com/ProductList.aspx?parttype=166&searchfor=Timing+Set&ptset=A
  17. J

    Anyone have a picture of the FRRP A/C Delete

    the hardest part for me and my buddy had was shimming the pump and bracket so the belt wouldn't slip off. this was time consuming and just freaking teadious.
  18. J

    Canton, Milodan, Moroso? WHICH ONE????

    i am using the canton 15-620s. it is made to clear girdles and windage trays. pay like $250 with pickup for it.
  19. J

    Anyone have a picture of the FRRP A/C Delete

    here you go. this is on a 351.
  20. J

    PA Performance alternator wiring kit

    here is a pic of the wiring setup. just ignore the 2 10 awg wires and add the fused 4 awg instead.
Top Bottom
Back
Forums
Menu