Search results

  1. midlife89

    Battery drain somewhere?

    Try disconnecting your horn.My son drives an old Town car horn went off by itself,he disconnected the horn didnt realize there was 2 and the batterykept draining.Does your horn work?If it doesn't try disconnecting it.(the second one didn't make any noise)
  2. midlife89

    removing stock h-pipe

    I got a large cable clamp from a hardward store tightened it down,then beat on the clamp to get mine loose.Mine.wasn't rusty tho,if yours is rusty you should be able to get it loose by heating it up with a torch (propane should work if you don't have an actelne)soak it with penitrating oil then...
  3. midlife89

    3.27 or 3.55's...???

    I like my 3.73s I drive mostly in town,unless I take a trip to summit.I took it on a 3 hr trip once,very annoying,I have two chamber flows.The drone got to me after a little while.If your gonna spend the money I'd go 3.73.
  4. midlife89

    4cyl springs?

    I put them on after deleting a/c and changing to alum heads.It came down 3/4" to 1" in front,didn't change the back.I was looking to level the car,not lower.As far as ride I haven't noticed much of a difference with sway bar connected.I might cut 1/4 coil off to give the car a slight rake.I...
  5. midlife89

    open breather element ?

    Thanks for the link I'm going to try it.
  6. midlife89

    open breather element ?

    I tried using seach tool,but I don't know if I worded it wrong.I'm planning on installing a oil seperator in the pvc hose,but would an open element breather that screws into oil fill help or hurt anything?I see that they make them or are they just for carbed engines?
  7. midlife89

    arm rest delete questions

    Thanks ,I think I'll be ordering one today along with struts for my hatch.I'm sick of using vicegrips to hold it up.D**n that hatch is heavy,must be getting old and feeble.
  8. midlife89

    arm rest delete questions

    How much do they go for on ebay?Never had much luck finding stuff there.
  9. midlife89

    arm rest delete questions

    25.00,only comes in black or grey.Anyone?Would like to know how wll they fit and how close paint matches before I order.
  10. midlife89

    arm rest delete questions

    I'm thinking of deleting my arm rest.Nothing wrong with it,just sick of hearing it rattle.Plus since stereo changed it just collects junk.Anyone use the delete from mustangs unlimited?How's it fit?Intierior paint a close match?(red)
  11. midlife89

    jegs brand aluminum head question

    If I could do it over Iwould go with the AFR165s.Ibought the EDDYS,and veryhappy with them,but the afrs flow better and are only 150 more.The only reason I went with the EDDYS was I didn't know the AFRS were availble with pedestal mount rockers and didn't want to rebuy rockers.If you have other...
  12. midlife89

    Quick Mustang 4 cylinder spring ?

    Oh yah,very satisfied.
  13. midlife89

    Quick Mustang 4 cylinder spring ?

    I went with 4 cyl springs on the front only.It dropped the front almost 1".I haven't disconnected the sway bar yet,I was kinda afaid to,hear too many horror stories about bad handeling.I'm gona try it in the spring and see how it feels.The reason I tried them was also weight reduction,the front...
  14. midlife89

    Stereo Install, Power But No Sound?

    amp for sure,had the same problem when I changed my factory stereo
  15. midlife89

    gauge pod question

    Where do you get triple pods at? All I've seen are double.Does anyone make one that replaces the original?
  16. midlife89

    placing tail light lenses

    That's what I used when I replace a taillight some took out in parking lot.It's been 13 years still no problem.That stuffs really tacky,you might want to wear surgical gloves.It'stough to get off your hands.
  17. midlife89

    Look what i got today!

    That's what I used on my cobra intake with stock and eddy heads,with no problems.Just make sure all surfaces clean and retorque after a couple heat cycles.I hate to be the bearer of bad news,but I really didn't notice much of a difference till I changed my heads.And I know this is obvious ,make...
  18. midlife89

    Should i switch to 4 cylinder springs?

    I switched to 4 cly springs because when Ichanged heads ,deleted a/c,moved battery the front came way up.I still run the sway bar and haven't noticed much of difference in handeling.But the front came down about 1".If you want the slammed look I'd just get lowering springs.I'mkeeping my car...
  19. midlife89

    How to change pilot bearing?

    grease works Years ago when I changed my clutch,I used grease with a wooden dowel rod and the pilot bearing came right out.I've seen other people use grease with no problem either.Just make sure rod fits tight in the hole.
  20. midlife89

    Anyone here have a billet fuel door on their Foxbody?

    I've only seen one and it looked like *****,IMO
Top Bottom
Back
Forums
Menu