Search results

  1. H

    Need help diagnosing chatter noise

    not very likely in his case since he has a off road mid pipe. :p If you can get someone to rev the car to certain RPM and see if you can hear it that way while you look around. Might be an accessory. If you hear it with the belt on and not sure where it's coming from. try taking the belt off...
  2. H

    Fuel, Spark,and No START!!

    Whats the point of wrapping your lines in thermal sleeving? I dont think you have to go that far if you are having warm/hot start problems if you have a faulty ECT sensor
  3. H

    Fuel, Spark,and No START!!

    Yes!! Possibally a faulty Engine Coolant Temp Sensor IF your car starts by pressing the pedal to the floor while cranking when your car is warm/hot The ECT is along the black coolant tube between the passenger side valve cover and the upper intake towards the front Have you checked for codes?
  4. H

    Fuel, Spark,and No START!!

    If it does start when you floor it while cranking, look into the ECT. When you floor the pedal it shuts off the injectors. You may also notice a big bunch of black smoke too. Good Luck
  5. H

    Quick Fuel Pump Question

    I think the pump is like 5 years old or so. its a 155lph summit or holley one I believe. I think I want to replace it just in case. lol
  6. H

    Puzzled w fuel pressure!!

    So you cant adjust the FPR to a lower PSI??
  7. H

    Quick Fuel Pump Question

    I never noticed this before but when you have the car running, are you supposed to hear the fuel pump make a constant humming sound. I hear a faint humming sound while im in my car and when I go the hatch area and lift up the carpet I can def. hear it more. I never heard this before...
  8. H

    Engine stumbles and misses under normal acceleration

    And how long have you had the air pump removed with your pypes Catted X pipe?? I personally would put your smog pump back on or get an off road mid pipe This could be your problem. When you have Converters you need that extra air from the Smog pump for the cats to work properly. If not they...
  9. H

    Engine stumbles and misses under normal acceleration

    If you have a analog volt meter, maybe you can test the TPS and see if it has a clean sweep as the throttle is pressed. make sure there is no dead spots in the TPS
  10. H

    STILL getting MAF code 66, and now code 98. Is my ECU toast???

    you have to take the kick panel off, and unscrew that black piece that holds the computer in place and just yank it out
  11. H

    Fuel Filter?

    or you can just pull up the inertia switch's red button in the left side trunk area, start your car, wait for it to die and do it that way to relieve the pressure
  12. H

    Worst header install to date

    Sounds like a PITA those plug wires are a mess tho lol those are very long. what brand?
  13. H

    TPS Question

    I think its a stocker. It was on the car when I bought it 6 years ago. heres pics
  14. H

    TPS Question

    hmmm thats strange lol Ill get better pictures tomorrow
  15. H

    TPS Question

    Heres a pic of the way it looks
  16. H

    TPS Question

    Thanks man! yeah I got a stock size throttle body but that pic helps a lot. Where the throttle blade shaft is, it just goes straight down where yours looks like its got something for the base of the TPS to sit on. so I just got a 1 inch diameter hole going straight down Since i have...
  17. H

    Car cranks but won't start

    are you sure the injectors are firing? Do you smell fuel when trying to start it? did you spray starter fluid in the air tube?
  18. H

    TPS Question

    The thing on that TB that turns the TPS is 3/8 inch wide and one notch to another is 1/2 inch wide to make full contact on both notches in the TPS. Im not making much contact to to turn the TPS and its ruining the notches. I put it on like I always did. Its just slipping after a while and...
  19. H

    TPS Question

    yeah there is nothing like that in there except a little rubber O ring on the very bottom below the thing that turns the notches on the TPS. looks like there is glue residue around the edges where the TPS's raised ring sits in. but nothing to make it stop from moving in the hole on top of...
  20. H

    Stalls at Idle (AODE)

    What year??
Top Bottom
Back
Forums
Menu