Search results

  1. KillerKittyCat

    I need a hug!!

    The car is going to the body shop of my choice. The grandson was driving the grandmother's car and hence a problem. I stated my terms. Enamel is on the car and for the most part original. My body shop will do a base coat/clear coat over the enamel fixing all things dented. ($1400) Tail...
  2. KillerKittyCat

    question about grant steering wheels and turn signal switches

    I guess I have to disagree. Both posts fell out and shorted out the horn. Now the horn cap keeps falling off. Not the best replacement.
  3. KillerKittyCat

    Oil pan gasket. HELP needed

    I agree!
  4. KillerKittyCat

    how do i remove light and ignition switchs?

    What MustangDave said was pretty much what happens. The hammer and screw driver is used to just move the bezel. Now If your key will not move to ACC. :damnit:
  5. KillerKittyCat

    I need a hug!!

    Well here's were we are!! It seems the Police do not want anything to do with anything they are not a part of. Why??? Because the city or county is so back logged on "motorist" cases. They are four months behind on simple traffic violations. They have more Officers sitting at the Court...
  6. KillerKittyCat

    I smell coolant, need pic of inside heater box

    YES!!!!!
  7. KillerKittyCat

    I need a hug!!

    Well the Police do not want any part of this. It's in the insurance company's hands. Prelimenary is $3000. Gas tank cracked, right spring shackle damaged. As far as the hospital . . . :notnice:
  8. KillerKittyCat

    I need a hug!!

    His insurance will have to pay. I just had the car appraised at 11K. Police were not involved but I do have six witnesses. Funny thing is that they all were more worried about my car than about me!
  9. KillerKittyCat

    I smell coolant, need pic of inside heater box

    The heater core is part of your cooling system. In other words coolant is always circulating. Try a simple bypass of the core and see if the smell goes away.
  10. KillerKittyCat

    I need a hug!!

    I have been working on the Mustang. Fixed all my little leaks, bad valve and upgraded to the Pertronix. The car is running "sweet". I am getting 26 mpg and have all the performance I want. So I went to the store to pick up a few things and coming home some kids decided to cross a four lane...
  11. KillerKittyCat

    Ignition Troubles

    Well just try a by-pass. Just do this for a few seconds only to see if you can turn the motor. Pull the "I" wire off the starter relay and put a jumper wire between that wire and the hot off the battery. Second, use a second jumper wire between the battery and the "S" on the relay...
  12. KillerKittyCat

    Gas Filler Neck

    This is good!! Believe it or not! That tank is NOT VENTED!!!!!! The vent is in the fuel cap. So when a modern fuel station nozzle seals to your tank it senses the backflow and shuts down. Grab the rubber on the nozzle and pull it back when you fill. Don't worry, be happy! Everyone...
  13. KillerKittyCat

    Ooops, Carb Help please?

    Well your little carb used to have an aluminum tube that was replaced by an adapter and a rubber hose. The fuel spillage was due to your fuel pump which fills the carb bowl. It is under pressure. About 6.5 PSI. Good thing is that your pump is working!!! :D When I rebuild the carb the...
  14. KillerKittyCat

    Rear Sway Bar Help Needed

    IMHO - take the bar back. You do not need it. Rear bar on an early Mustang is equivelent to saying chrome will make you go faster!
  15. KillerKittyCat

    starter heat problems-funny solution

    I got to drive a Tiger. My hair still goes straight back and I am still looking for my underwear. You sit in it and really have no room to move. I am 6 foot and could see over the windshield. Turn the key and nothing else matters.
  16. KillerKittyCat

    The best drink ever!

    Would you like me to build you a closet so you can come out???? :banana:
  17. KillerKittyCat

    starter heat problems-funny solution

    Foghorn - Sunbeam Tiger is a FORD!!!! And I want one!!! Only production car faster than the Tiger in 1967 was the AC Cobra. And just barely. Heat is your problem. Not the ground but the starter solenoid. Here Kitty, kitty , kitty!!! Got to love them cats!!!!!!!
  18. KillerKittyCat

    351c or 351w?

    I had a 351W built by a performance machine shop for a 69 Cougar Vert that I had. It cost about $1900. Just short of a roller cam. 10-1 pistons etc. 440 HP and a 7500 redline. Sears Point (which would not let me do it :bang: ) pulled 160 mph before they shut it down. No roll bar/cage...
  19. KillerKittyCat

    Used the wrong tranny fluid.

    You put the kit in let's just say "not correct". The bands are out of adjustment. Also get some "Lucas Tranny Additive" Should help you out.
  20. KillerKittyCat

    Completely Dumbfounded. Someone get me a DUNCE cap.

    This is why I am confused. I have the louvered pipes the go through the valance. Everything is DRY!!! It seems like I have a build up of pressure somewhere and it gets out but not where I think it should?
Top Bottom
Back
Forums
Menu