Search results

  1. tca7291

    Engine Radiator Fan Shroud And Overflow Tank

    Here's the dimensions: Dimensions: 8.25" h x 4.25" w x 7.50" l, .10 pounds Found on this link: http://www.wattconverter.com/detail/B000E35UV2 Hope this can help!
  2. tca7291

    Engine Radiator Fan Shroud And Overflow Tank

    Cool... http://www.oreillyauto.com/site/c/detail/MOR0/63657/N0186.oap?ck=Search_N0186_1133794_2259&pt=N0186&ppt=C0331 Not so cool, but effective... http://www.oreillyauto.com/site/c/detail/DOE0/603001/N0186.oap?ck=Search_N0186_1133794_2259&pt=N0186&ppt=C0331
  3. tca7291

    Seized Oil Pump...

    ARP shaft, yes. Prepped pump, yes. Primed, yes. ~35 psi cold primed. Never had access to all bearings to change out. Trying to get her back on the road asap. If the engine decides to go, then so be it, I'm planning to build a new engine very soon. All I'm getting at is I figured she would...
  4. tca7291

    Seized Oil Pump...

    Never had the engine all the way out. Just jacked up enough to drop the pan and get in there a little. Cooling system, fuel lines, bellhousing, ect. never got disconnected. Like I said, she is my daily, so getting back on the tarmac is very important. I'm going to start building a new...
  5. tca7291

    Seized Oil Pump...

    Given it's my DD, I'm going to go ahead and put her back together and into service. In the mean time, I've already started looking for a decent short block to start building, so I can do the swap, and rebuild this guy. I know exactly what you mean, I'm always going to be waiting (listening)...
  6. tca7291

    Seized Oil Pump...

    So I did this write up over in the squeaky, but thought it would be nice to share with you guys too. Okay, so here we go. As most of you know, I suffered oil pump failure last weekend in the stang, and drove it home without any pressure, about 5 minutes, and about a mile and a half. I drove on...
  7. tca7291

    Efi To Carb

    Y'all need to listen to this guy. He very well knows just about everything about your cars.
  8. tca7291

    LOL, Now THIS is rustproofing

    I wasn't referring to you, I was bumping it up for the newer members that have not had the chance to read this epic thread. You're not that special.:nonono:
  9. tca7291

    Post pics of how your foxbody currently sits

    She did get a new stance!
  10. tca7291

    LOL, Now THIS is rustproofing

    :banana:Bump for teh noobz.:banana:
  11. tca7291

    Help

    Had a similar issue, it turned out to be just a weak battery. I had a newer alternator on it, but on a hot start, it would be so weak that she almost wouldn't start. I was over-thinking the problem, until I was sitting for about a half hour one day with the radio on after work, and it was...
  12. tca7291

    Suspension Custom Alignment

    Nice write up! I've been playing with my alignment quite a bit after lowering my '87. (The best I can with stock CCs) I was curious on how you like the new characteristics of general/spirited driving with this new setup? Beautiful GT BTW!
  13. tca7291

    Them Darn Sway Bar Bushings Did Me In.

    Someone else had sway bar/oil pan clearance issues on here not too long ago. Lemme see if I can find it... Dunno where it went... Anyway, I remember from that one that if you don't space the new mounts down to the factory level, the sway bar will hit the oil pan.
  14. tca7291

    Suspension Bushing Reccomendations

    Hey all, just threw in a set of Eibach springs into my '87 last weekend, and realized that pretty much every bushing, and spring insulator is shot, and was wondering what would be the best complete, front to back, urethane bushing kit to look at. I figure that I would like to replace all of...
  15. tca7291

    Rust

    I don't know if they still have it, but back in the day (10-15 years ago) Eastwood sold some stuff called Coorless, or a product close to that spelling, I can't remember exactly. I used that stuff a lot on several different projects, as did my dad and my brother. It was great for future rust...
  16. tca7291

    Rust

    If I was in your shoes, I would take a grinder with a cutting wheel, square up that hole in the floor while cutting back as much as needed to remove the cancer filled area, treat the inner frame rail like previously posted, and weld in a piece of new steel. I've worked on/owned 2 rust buckets...
  17. tca7291

    Engine Here's An Issue You May Or May Not Have Dealt With B4

    How is the timing belt?
  18. tca7291

    Please Help, TurnSignal problem

    Holy thread resurrection Batman!!!!
  19. tca7291

    Old Top Gear Clip From 1992 Featuring 5.0 Convertible

    I like Jermey's afro! I wonder why he cut it...:chin
  20. tca7291

    How Long...

    I go every year just to rummage through the swap meet to see if I can find anything worth while. I'm riding up with my buddy in his Kenne Bell supercharged silver '05 that he is showing this year. It looks mostly stock, besides the retro headlights, quarter glass louvers, and exhaust tips...
Top Bottom
Back
Forums
Menu