Search results

  1. S

    So my stang was broken into... what security system do you guys recommend?

    Anything Dei, the viper and clifford are their top units, black widow is not made by dei it is made by dave levy, and they suck, audiovox has some decent units out there are too, you can also find them under the prestige name as well. If you have a vert i would for sure do a battery back up and...
  2. S

    exhaust

    I had the off road h pipe with 40 flows it was loud but not too bad, i miss the rumble from my 95 now when i drive the 02 around. H pipe is deeper in sound then the x in my opinion. Dan
  3. S

    Still With Oil Leak...What to Check Next?

    Forgot you had the blower but still should not be bad at the shop where they have a puller and all that good stuff handy, i did mine when i took out the smog pump It took bout 2 hours to do it all. Dan
  4. S

    how to install my Kenwood w/MACH 460

    Sorry man but i'll need to clarify something here those plugs down in the panel are for the tweets only thats why it sounded like poop when u used them, The deck could not have been blown by wattage coming back, maybe you got a bad ground but hooking it to the mach system would not blow the deck...
  5. S

    Still With Oil Leak...What to Check Next?

    It should not be much to put the seal in maybe an hour tops at the shop, If I remember correctly the seal was 7.99 , so it should be inexpensive I would hope. Dan
  6. S

    Still With Oil Leak...What to Check Next?

    Is it the seal behind the balancer? I replaced that seal on my 95 when I did the balancer and it pulls out and you tap the new one in, really painless I dunno if this is the seal you are refering to though? Dan
  7. S

    how to install my Kenwood w/MACH 460

    Alright You got to go buy the correct harness it is for the mid 90's premium sound for the ford i cant remember the number but just tell the guy at the shop what you drive. It has a grey plug that is a rectangle and a small black square one, that is the harness you need i strongly reccomend...
  8. S

    How many cats

    Thanks Mine needs to lose some soon, someone told me that some stangs had 6 cats and i was not about to look underneath it, if i do not need to pass a visual will running a x pipe with 2 high flows in it keep me legal? thanks Dan
  9. S

    How many cats

    How many cats does an 02 Gt have? Thanks dan
  10. S

    Loss of oil after switching to synthetic

    Of course but when my moms 96 4.6 does not nor does my dads 32v toyota i kinda wonder, we all run 5w30 and i am the only one experiencing loss a full quart in 2000 miles is a bit excessive in my book. Thanks for the help Dan
  11. S

    Loss of oil after switching to synthetic

    Trust me i thought the same thing i was like ok maybe i'm a dumbass, but ya it's low according to the stick, i kinda wonder if the dipstick is jacked though cause it is a b i t c h to get in the hole even more so then when i got the car, i have had no check oil lights or anything so i dunno what...
  12. S

    Loss of oil after switching to synthetic

    Ya 11500 is not exactly high mileage in my book, I just wanted some feedback if people thought this was normal or not it does not appear to be leaking from anywhere I can see but does seem to be consuming some oil, I put some more in and am going to watch and see how fast it uses it. Thanks for...
  13. S

    Loss of oil after switching to synthetic

    Guys and Gals, I switched to mobil 1 about 2k miles ago, My car has been using a bit of oil, at this point it is down to the min on the dipstick, to me this does not seem normal, has anyone else had this problem at all? I bought the car with 7500 and it has 11500 on it now, it runs great and i...
  14. S

    clay bar

    1. Wash and dry car 2. spray quick detailer that comes with clay on section to be worked 3. rub clay bar back and forth no hard pressure needed you will see once you start using it and be able to tell when it is time to move to the next section. Keep the area wet with the spray detailer where...
  15. S

    Rear Speaker Replacement in Vert (Mach 460)

    I think i went with some kenwood dual mags and they fit just fine you can splice into the factory wire or run some new wire in there good luck Dan
  16. S

    Rear Speaker Replacement in Vert (Mach 460)

    Hey man i responded to you in the other forum, you can remove the 6.5 there is four screws under the foam on the large speaker, remove it and bolt the new speaker in that opening, when you take the speaker out you will see where you can run the wire in to it, just run wire to your new speaker...
  17. S

    Can't get rid of interference noise

    Where are all the wires ran? I know you have tried different sets of rcas, but have you ran them in the same spot, Couple of things to check. Where are the amps mounted are the mounted flat and nothing is pushing down or twisting the amp body around, Make sure nothing is pinching the rca's no...
  18. S

    Post your beater

    Here is my winter beater It is not entirely a beater it runs like a champ and goes anywhere, just not the greatest on the gas mileage, low res pic but it is the only one i had. Dan
  19. S

    OK I bought a Clarion DXZ835MP Trying to install into 02 GT w/mach 460...help!!

    There is a harness, but it is kind of tricky getting it hooked up, does your headunit have a high pass filter? If so you can possibily get it to work, there is a harness made for the 99 and up ford premium radios, it has three plugs in it one of which send sound to the 6x8 speakers, now the...
  20. S

    Replacing rear spkrs on 95 vert with mach 460

    It is a 6.5 any 6.5 should fit in there just fine, you'll see when it comes out it is pretty straight forward, let me know if you need some more help Dan
Top Bottom
Back
Forums
Menu