Search results

  1. P

    Looking for chassis specs for '69

    May want to try this site http://www.1969stang.com/main/
  2. P

    What is your opinion of the Dynacorn '67 fastback bodies?

    I'm redoing a 66 vert now. I've replaced 70% of the metal. Been on it for off on and on for 1 year now. Although it will be a lot less than than 15K if all the repairs were done by a shop it would well exceed that. Sure would be a lot easier with a new shell but would not feel like a...
  3. P

    Need assistance with my cowl side panel

    Its hard to imagine it was defective. I'm doing mine now and it is a spectra also. In measuring from up against the pilar where hole is to edge of cowl min is 12 1/4 inches. Also the flange on you firewall patch looks wide mine is 5/8 of an inch. To me it looks like you have everything right but...
  4. P

    Which Distributor?

    + ive got the vacuum advance on my 347 set up and ended up capping the hose. I need to pull it out and lock it out one of these days. I was having some off idel acceleration issues. Thought it was carb but local engine builder was looking at my car and plugged - not more offi idle issues.
  5. P

    Would love input. 68 and 69 Mustangs need a lot of TLC

    I would also pull he distrib and spin oil pump to get oil up in it before starting
  6. P

    WTF is this noise, and why is it happening??

    my money is on rocker hitting valve cover as already mentioned.
  7. P

    Front coil spring adjustment

    I think you may find there is not a general rule of thumb since engine sizes and other power add on as well as springs can make a difference. On mine I took a quarter off at a time to get stance I wanted - I have a 347 with all the power add ons. A 1/2 coil got me about an inch - which is pretty...
  8. P

    Rear sway bar.

    I put one on mine and my previous mach 1 came with one. I lot the handling better with it.
  9. P

    Nice upgrade but...

    Overall like the new themes. No big deal but displaying members Icons next to topic is somewhat distracting.
  10. P

    Thoughts on this MIG welder

    Ive got a 130 licoln and have not run against anything I can use it for on my car. Sounds like a good deal.
  11. P

    Camshaft for 331 stroker

    I think you are getting feedback from people that are knowledgeable. Every build is different and is based on peoples preference (low end versus high end torque, lopey cam vs smooth idle, gas mileage important, etc.) and is very subjective - no right or wrong answers. You got a couple...
  12. P

    Camshaft for 331 stroker

    Good point on valve train noise. My valve train noise is a little noisier than most. I had just attributed it to the hydraulic lifters and being a roller.
  13. P

    Camshaft for 331 stroker

    Ive got a comp cam xe274h. Really like it a lot. Good idle adn vacuum but lot of torque. May want to talk to comp cams. I found them to be pretty useful. Gears and stall will also need to be consideration.
  14. P

    Spraying Primer in Garage - Any Tips to Keep Mess Down

    Sounds like a plan - thanks
  15. P

    Spraying Primer in Garage - Any Tips to Keep Mess Down

    Yep got a HVLP - thanks for tip on pilot. I do have painted floors that is one of the things I did not want to trash.
  16. P

    Spraying Primer in Garage - Any Tips to Keep Mess Down

    I think what I will do is run my garage furnance to 70 shut it off then spray. Open it up and let air circulate and then shut it and turn the furnance back on. It is pretty insulated. I already have blasted the fenders and want to shoot before surface rust builds up. I'll just cover everything...
  17. P

    Spraying Primer in Garage - Any Tips to Keep Mess Down

    I've got a couple doors I need to spray after sandblasting. I've got a pretty nice garage I don't want to mess up. Unfortunately weather does not me allow to shoot Epoxy outside - Any tips to keeping mess down. thanks
  18. P

    well started body work on my 68..

    Nice. What size tires are you running?
  19. P

    Stupid question about a c4

    Check out Lokar kickdown linlkage
  20. P

    wheelhouse - How do you clean?

    Floor adhesive remover from home dept is great for taking off tar/old undercoating.
Top Bottom
Back
Forums
Menu