Search results

  1. DTMach1

    Is It Tough To Install Catback Yourself?

    here's a tip, before you begin, take off your rear tires, support the car on the frame, not the axle. This *might* give you enough clearance to muscle **** the old pipes out. If there still isn't enough clearance, take a sawzall and cut the pipe clean right before it bends over the axle...
  2. DTMach1

    2003 MACH 1

    actually think mid-11's btw, if you can't drive, and he can, you're screwed. LS1's are a dog off the line, so you have to jump him and hope he doesn't pull you. Usually if I beat an LS1 with a good driver I have to kill him off the light and 60ft because they will reel you in by the end of...
  3. DTMach1

    Looking for newer GT, how to tell which ones are 260 or 305 hp?

    how is a 94-95 5.0 heavily underrated when most dynoed at around 190-200rwhp? by my calc. that's a dead on fw rating!
  4. DTMach1

    Adjustable Struts for '04 GT

    I use tokico Illuminas on my Mach, the part numbers are exactly the same...here's where I bought them from...it's a steal BTW struts shocks I know they say 94-01 but they will fit your '04 GT since they fit on my '04 Mach1
  5. DTMach1

    Halibrand Cobra III wheels

    well here's the problem guys...you see that cobra up there? The rims they sell on discount tire direct will not clear the front the brakes. That is why the rear is deep dish and the front is not. The reason is the backspacing is incorrect. If you own a GT you will clear the front deep dish...
  6. DTMach1

    Halibrand Cobra III wheels

    these are better, check them out! http://www.mach1review.com/products_wheels_halibrand.html much more depth, and less weight.
  7. DTMach1

    My 5.4 Blew My T45.........GO FIGURE!!

    stop crying :nono:
  8. DTMach1

    King Cobra Clutch...

    the King Cobra will fail on you very soon...get a better clutch fast!!
  9. DTMach1

    My 5.4 Blew My T45.........GO FIGURE!!

    get the TR-3650 it has a 360ft/lbs rating vice the 325ft/lbs the T-45 has if you want something beefy, get the T-56 TUET 1808 (viper spec)
  10. DTMach1

    Mach 1 Gauge cluster

    auto machs have a 5800rpm redline, just like the bullits...also the Mach cluster will say "premium unleaded only" the bullit will not
  11. DTMach1

    Mach 1 Auto Machs - what kind of times are you seeing ?

    a buddy of mine ran a 13.4 @ 102 with just 4.10's and a tune in his auto mach
  12. DTMach1

    **MILESTONE** 1st 2VNA car in the 10's!!!

    just goes to show you, proper suspension dialed in, good weight reduction, anything is possible! good show!:nice:
  13. DTMach1

    How to ruin a Mach 1

    that mach makes me want to go hug mine....poor Mach never saw it coming :( it's okay baby, the bad man won't touch you
  14. DTMach1

    Pontiac GTO vs Mustang GT

    Mach-1's don't just barely beat GTO's at my home track...we spank them... well I should say...would spank them, but for some reason the don't run in the street class, the GTO's that were running at my local track were both running in the compact sport class!!(that's no BS!) the best time...
  15. DTMach1

    BULLITT CLUSTER INSTALLED!!!!

    yes the bullit cluster and the mach cluster are the same...with minor variations... on the Auto Mach-1 the redline is 5800 RPM on the Manual it is 6800RPM also both say "premium fuel only" right above the gas tank locator arrow
  16. DTMach1

    99 Cobra vs SRT4

    check it out bro...you have an IRS...bone stock a good driver can get a '99 cobra into the 13.5 range...with your mods you might be looking at the 13.3-13.4 range, if you're a good driver...your springs do not help out at all...unless you have adj struts and shocks... those stage 2 neons are...
  17. DTMach1

    failed emissions -- please help :-)

    move down here to the beach...no emissions testing ;)
  18. DTMach1

    former chevy man buys first mustang

    I'm a serial waver myself, I wave at every mustang I pass...including the V6ers
  19. DTMach1

    MACH1 owners..can I get a picture posted please?

    if you get a Mach cluster for your GT, get the auto transmissison cluster so your redline stays the same...otherwise it'll be 6800
  20. DTMach1

    4:10's, 3:90's, or 3:73's

    4.30 for an N/A application...you wont look back.
Top Bottom
Back
Forums
Menu