Search results

  1. P

    Extremely Beat 68 Fast Back

    Maybe my current project has toughened my skin a little but looks like a good platform to start with. Only problem is since he is paying you to do it. Seems like a Dynacorn full body would be more cost effecient for your customer.
  2. P

    Which Rockers Should I Get?

    Thanks for the heads up. The GT40s spec say they can work with stock pushrods (non hardened) - I'll try and if I bend it I will look at the wheel kit. Seems like there is a lot to putting a set of rockers on. Hope the money saving I think I will be getting from buying a crate become worth it...
  3. P

    Which Rockers Should I Get?

    Ok bought the scorpion 1.6s, rocker channels, shims, and a pushrod checker from summit. Appreciate the help. http://www.summitracing.com/parts/scc-scp3021bl/overview/
  4. P

    Which Rockers Should I Get?

    Great videos - thanks Its a '91 roller block with "GT-40X XTRA PERFORMANCE "TURBO-SWIRL" ALUMINUM CYLINDER HEAD M-6049-X302. I'm assuming these are the original springs that came with the heads. They have pedestal mount. I read in some places people use shims to mount rockers - whats the...
  5. P

    Which Rockers Should I Get?

    Not in a hurry so I will probably just keep my eyes ipn for used ones
  6. P

    Which Rockers Should I Get?

    Just bought a rebuilt 91 302 with aluminum GT40 heads and an E303 cam. Want to get roller rockers for it. Not looking for anything radical car will be a cruiser. More interested in value (good quality not super expensive) that does not require to anything special (ie., like to keep stock length...
  7. P

    TMI Seat issues

    When I did the sport version on my 70 lost some head room. I'm 5'10 and only had about an 1 to 2 inch between my head and liner. Actually seems like you sit more straight up also. Hit my head a few times getting into the car. I also have a 13 inch steering wheel - larger one would be a...
  8. P

    Help please

    http://www.1969stang.com/main/
  9. P

    Engine Struggling with the rebuild

    any blow back out of the carb - would show timing issues. Put a paper towl over carb and crack and see if it blow off.
  10. P

    Reclining seats for a tall guy, that fit in a 68?

    at 6'4" I think you will need to set seats back to give yourself some leg room.
  11. P

    Coyote in a 70 Fastback

    I've got a 2007 GT along with the 70 with 347 stroker. The 2007 puts out about 300 hp same as new 6. It feels kind of anemic after driving the 70. I would have to go with a v8 in a new one.
  12. P

    1966 Mustang Needs A Little Work

    Wow - I thought my car was bad. Hopefully you don't lose interest b4 its done
  13. P

    Coyote in a 70 Fastback

    article in this months modified mustang and fords. Says you will need to ise a mustang II front end or strut and tower notch will need to be done - engine t00 wide. Also some trans tunnel work would be necessary. Interesting idea but you can get a nice stroker for less than a coyote and not...
  14. P

    Seam sealer in engine bay?

    Another trick is to tape both sides of where sealer is going clean up like hourse sense mention. when you pull the tape off you have nice clean lines.
  15. P

    Looking at motor what do you think?

    I ended up low balling the seller. Motor was not exactly what I was planning to do. I doubt he will go for the $3k I offered but it has to be a little difficult privately selling a motor. We will see. Thanks for the posts.
  16. P

    Looking at motor what do you think?

    I have the XE 274h in my 302 347 in my 1970. I like it a lot. Running 3.44 gears with auto in that one and I like them not too bad on highway. Have a 2800 stall. For this build still piecing the car together. Basically starting with a shell. Bought all the suspension items first.Was looking...
  17. P

    Looking at motor what do you think?

    Asking for the name of the builder now. Here is the work order he provided
  18. P

    Looking at motor what do you think?

    For my 1966 project currently ran accross 289 Stroker motor I'm considering buying from someone that had a project and motor rebuilt and stroked but lost interest and sold the car and is looking to sell motor. No miles on rebuild. They are asking $4000. Interested in opinions on set up...
  19. P

    Looking at motor - what do you think?

    For my 1966 project currently ran accross 289 Stroker motor I'm considering buying from someone that had a project and motor rebuilt and stroked but lost interest and sold the car and is looking to sell motor. No miles on rebuild. They are asking $4000. Interested in opinions on set up...
  20. P

    body panels?

    +1 On Ford tooling fenders. Have repros on my 1970 - fit okay but material lot thinner. On the 66 I went ford tooling good fit and thickness. Worth the money. Wish I would have changed my 70's out before I spent $5k on a paint job.
Top Bottom
Back
Forums
Menu