Search results

  1. 408stroker5.0

    accel Ugroove plugs

    I don't know who actually make's the plug's for Accel (Maybe NGK), but to keep it simple, there is nothing special about them. They are based off of NGK's V Groove plug which is crap and most of all don't belong in a Ford. If you want good plug's for your Ford stick with Motorcraft or Autolite...
  2. 408stroker5.0

    This is an amazing deal

    :stupid: :stupid: :stupid: :stupid:
  3. 408stroker5.0

    good harmonic balancer.

    I've heard alot of great thing's about ATI balancer's and the TCI Rattler. Although they really perform there best at higher RPM's and really don't belong on a street car. I know pretty much all the Nascar engine builder's are using the ATI's. The above mentioned balancer's are great as...
  4. 408stroker5.0

    My last head debate question: AFR 185s or Vic Jrs?

    Consider this.... MM&FF Magazine quite a while back did a dyno test on a 393 Windsor Stroker equipped with AFR 185 heads. I cant remember the exact details, although I'm sure the cam was a Comp 288HR with lift in the area of .555 & .575. Compression was around 9.5:1+. I'm going to try and find...
  5. 408stroker5.0

    Popular Free Stuff

    Switched to Dark Moon... Not as great but at least the google man is gone.... Much Better.
  6. 408stroker5.0

    377 Stroker

    I assume your talking about stroking a 351 Windsor. The most common kit's out there are 393, 408, & 418. Tone's of manufacture's make cranks, rod's, piston's etc. etc. to make stroking a Windsor possible. Scat, Eagle, Probe, Lunati, FRPP, SRP etc. etc. are just a few of them. They make kit's or...
  7. 408stroker5.0

    Snow is on the way

    Snowing pretty good here in Alberta! Cold too!! Have no money too buy a Ski-Do this Year....Spent all my money on the Mustang. Oh Well. Shon
  8. 408stroker5.0

    My last head debate question: AFR 185s or Vic Jrs?

    Victor's are a great head by all means Mike.... but even if N8miller goes and throw's a more radical cam in that 331 I'd still say the Victor's will be overkill.... there too much head for a mild 331. They will make power but his powerband will suck. With the higher lift/duration cam and high...
  9. 408stroker5.0

    Need a poll on headers

    I've alway's felt BBK makes the best bang for the buck header out there. If money isn't a concern then I'd go for Hooker or Kook's headers which is what I'm replacing my BBK's with over the winter.
  10. 408stroker5.0

    SMOCKDOILEY message for you

    Why dont you send him a private message instead of posting this in the TECH section. Oh Yeah....I forgot....Your the bonehead that wrecked your buddies quad...refused to pay.... and then had your 460 stolen in retaliation and cryed about it to everyone on Stangnet.
  11. 408stroker5.0

    Popular Free Stuff

    Someone has really got to get rid of the google man. I hate it......
  12. 408stroker5.0

    302 head casting numbers, tell me what i got

    Those aren't casting numbers. See the above post's...your numbers should be similar in format as the one's above. Ex. E7AE, D5OE, etc. etc.
  13. 408stroker5.0

    non sfi and sfi balancers?

    Alot of company's make affordable Non SFI performance balancers. Powerbond & Streetdampr just to name a few.
  14. 408stroker5.0

    My last head debate question: AFR 185s or Vic Jrs?

    Victor Jr's would be overkill for your engine... Plain & Simple. You need more cam more compression, more cubes would be nice etc. etc. The AFR 185's would outperform the Victor's on your engine as they would be more suitable for your application and combo. Go with the AFR's. Shon
  15. 408stroker5.0

    non sfi and sfi balancers?

    Check out this site for more info on the SFI foundation..... http://www.sfifoundation.com/
  16. 408stroker5.0

    non sfi and sfi balancers?

    SFI approved mean's it is approved for the track. Basically the balancer is shatter proof if it's an SFI balancer. Most track's or sanctioned racing division's will require you to run an SFI approved balancer if your running faster then a set time in the 1/4 for safety reasons. The same goes for...
  17. 408stroker5.0

    Popular Free Stuff

    Free Post.....
  18. 408stroker5.0

    Can I buy one roller rocker?

    Style of the rocker arm is the most important but it's best to have a matching set (Brand/Type) of roller rocker on an engine.
  19. 408stroker5.0

    Can I buy one roller rocker?

    I know that Comp and Crane Cams will sell you 1 rocker. Say you have a Comp rocker and the part number for a set is 1032-16 (16 Means 16 Rockers) Take that part number and change it to a 1032-1, and you'll get one rocker. Before you do anything though you really have to find out what brand...
  20. 408stroker5.0

    WILL '65 289 HEADS FIT MY '84 302???

    They will work. Get me the casting number of the head and I can tell you all the specs.
Top Bottom
Back
Forums
Menu