Search results

  1. mtaqua

    Disc Brake Options.

    I used the CSRP swap, it was significantly less that the others. It seemed like it was the same parts when I was looking years ago. No problems with it, instructions were easy, and customer service was good.
  2. mtaqua

    Anyone Used A Key Locking Auto Trans Shifter Knob?

    http://www.grantproducts.com/products/browse/installation-kits/racing/ pretty sure these only work with grant wheels, I am using one of their wood steering wheels.
  3. mtaqua

    Anyone Used A Key Locking Auto Trans Shifter Knob?

    push button ignition, no key required to start. if I park it somewhere I worry about I take my steering wheel like rbohm does. I get funny looks, but really don't care, my car is cooler than the lookers. I do have door locks, but they would only slow down a rookie thief. Without the steering...
  4. mtaqua

    stang w/ harriers

    flew the Harrier, that was at 203 as an instructor, currently getting ready for test pilot school, I already miss the Harrier, it was a really neat airplane to fly.
  5. mtaqua

    stang w/ harriers

    http://dl.dropbox.com/u/48077807/mustang_harrier/VMAT-203%20Mustangs-1.jpg http://dl.dropbox.com/u/48077807/mustang_harrier/VMAT-203%20Mustangs-2.jpg http://dl.dropbox.com/u/48077807/mustang_harrier/VMAT-203%20Mustangs-3.jpg...
  6. mtaqua

    this gass is CRAP

    well hopefully without making to many people mad, I'll say it; ethanol was subsidies and suppose to be one of the solutions for green energy. We have seen other areas green energy has failed. I don't think people really get how much we depend on oil and how well it works compared to everything...
  7. mtaqua

    Looking for non-reproduced parts for a 66 coupe

    I had to reuse mine as I couldn't find it, I think you are probably going to have to contact some of the dealers who stock used parts (that is what was recommended to me).
  8. mtaqua

    66 coupe -fast back, yea i am going to do it again

    yeah, thinking a 6 cylinder coupe, as I am planning on full tub and MII next time. I used a c-code, and wouldn't feel bad about another c-code if it was as cheap as a 6.
  9. mtaqua

    66 coupe -fast back, yea i am going to do it again

    Very nice, I replaced the same metal on my coupe (minus the roof skin, and plus wheel wells). I wish would have done this instead. My roof was horrible and it took a ton of work to get right. This would have been easier, and not cost to much more. I always said my first one was my learning...
  10. mtaqua

    One Wire Alternator Hook Up

    I also used a fuse for my one wire. Make sure the post stays tight, there is a jam nut. Mine got loose and it wasn't charging. I was able to tighten it, but it's days are numbered now.
  11. mtaqua

    65 coupe scoop specs

    by the time your done with the body work you might be better off buying the $600 hood.
  12. mtaqua

    opentracker UCAs, full roller perches, drag shocks, 8088 springs

    forgot to add these are for 65/66 again these are the drag race roller versions.
  13. mtaqua

    Pushrods for guideplates

    also, when measuring for push rods, I'd favor a smaller witness mark that is offset from center as opposed to a larger centered mark. As poppy said the idea is to get a continuous 90 degree relationship, so the rocker is not sliding back and forth on the valve tip creating side loads and wearing...
  14. mtaqua

    stang w/ harriers

    203 flight line
  15. mtaqua

    stang w/ harriers

    CO let us shoot our cars with the jets. I have some from a professional photographer that I should get back in a day or two. Hope to get in a magazine.
  16. mtaqua

    valve cover clearance

    I have the tall FMS with almost .700 of lift on high ports comp gold rockers with a girdle and no issues.
  17. mtaqua

    looking for advice on a carb

    again, I'd look at someone who builds carbs if you are going with anything other than a stock holley. the cost is the same as the upgraded carbs and you can have one built for your motor by someone who you can call and talk to on the other end of the phone. rather than calling a tech rep at...
  18. mtaqua

    WIX

    fram is low quality, wix has been around and a much better filter. I have not have a fram fail, used them for a while (not anymore). several engine builders I know have seen frams lead to failure, and recommend wix or motorsport.
  19. mtaqua

    manual proportioning valve??

    I think the dist block he is referencing is the stock one, and I think on some they have a proportioning function built into them (70/30). I have t-fittings splitting the lines, and manual prop valve on mine. I've got 4 wheel disc, allows me to control the bias to the rear brakes(runners and...
  20. mtaqua

    steel cowl vent covers for a 65.

    I welded, but probably would do adhesive if I did it again.
Top Bottom
Back
Forums
Menu