Search results

  1. justin

    Roush reichard racing s/c pulley=crap

    I thought the stock was a 3.0 and the Chicane was 2.8?
  2. justin

    How do I get blood off the carpet?

    Another option is Folex. It can be found at Walmart and Lowe's. You spray it on, let is sit of minute, and then rub off with a white towel. I haven't found a stain that Folex won't remove. Hope this helps.
  3. justin

    Roush dropping the tank..?

    The Chicane pulley works well.
  4. justin

    any ideas on detailing/or products to use?

    Yeah just explain to them what is involved in the process and what you will be doing. Tell them the clay will take out all their contaminants out of the paint. The polish will clean the paint and also bring out more shine and reflection and the wax is protecting what you did in the previous...
  5. justin

    any ideas on detailing/or products to use?

    I have different prices ranges depending on what the customers wants. Wash,claybar,chemical polish,and wax. $125 Wash,clay,swirl/scratch removal-abbrasive polish, and wax $150 plus Now this isn't even touching the inside of the car.
  6. justin

    any ideas on detailing/or products to use?

    Yeah it is important to let the sealant sit for 30 min to an hours before buffing off. Once you buff off it is in the curing stages. It is best to let it cure for 8-24 hours before adding another layer or before moving on to the wax. Yes it should turn out super shiny and the paint should...
  7. justin

    Fall Pictures Before Winter

    I'm a die hard Martin fan too! I about lost it when he got crashed out today!
  8. justin

    any ideas on detailing/or products to use?

    I have a Porter cable polisher package deal on my website. It has the polishes,backing plate and pads needed to do the job. This combined with the polishes will give you the results you are looking for. When the claybar gets a little dirty just knead it to a clean section and start again...
  9. justin

    any ideas on detailing/or products to use?

    Yes the Optimum Polish will be alright with a normal buffer but works best with a high speed orbital or rotary. The Red Moose glaze is a great product you could try out. I sell a lot of that. It can be applied with a machine or by hand. How did that claybar work for you? Get a lot of junk...
  10. justin

    Roush Things I learned today....

    Sorry to hear about the bad news. I take it you didn't get to try out your products! lol
  11. justin

    Fall Pictures Before Winter

    Sounds pretty cool. I can probably get around 15-20 cars from my mustang club to come too.
  12. justin

    Fall Pictures Before Winter

    Yeah I might come down there. Would they let me bring my product setup? I usually take the stang and wife brings the products!
  13. justin

    Fall Pictures Before Winter

    Yeah I just went to a car show in Paris about a month ago. Do you ever go to the Mustang show in Effingham,IL?
  14. justin

    any ideas on detailing/or products to use?

    Can't wait to see some pics! I knew you would be happy with the products. I use all these products on cars that I show prep. So i know they work awesome!
  15. justin

    Fall Pictures Before Winter

    Yeah I'm about 10 minutes south of Danville.
  16. justin

    Fall Pictures Before Winter

    Lookin good! Where in Illinois are you from?
  17. justin

    any ideas on detailing/or products to use?

    I don't think you will really notice a difference with the Wolfgang with the combination of products you got. To get the deepest shine you would really need to polish with a machine. You can only do some much by hand. That Red Moose glaze should make the paint look really deep and wet. The...
  18. justin

    Roush dropping the tank..?

    That is the write up I followed to. Very good info. There is no need to remove the bumper.
  19. justin

    You ever get tired while waxing and give up?

    Poorboys Natty's is my go to paste wax. I also love the ClearKote carnuba wax. I'm having a sale on my waxes right now if anyone is interested.
  20. justin

    Thank you Justin/ obsessive detail

    Frank No problem. Thank you for your business! I just sent you a pm explaining the process of how to use everything like you requested. I can't wait to see some pics of the finished result!
Top Bottom
Back
Forums
Menu