Search results

  1. faststang90

    coilover guys, chime in

    look here. u need to go off what the car is used for and is it full wieght car. i would start at 150 on the front if its a street car i had 175 and the front of the car did not want to move at all. BaselineSuspensions.com.........Launching A Drag Car
  2. faststang90

    Does anyone have smoked brake lights?

    i like them they look good darker than mine. what is that VHT spray just a tint?
  3. faststang90

    New front brakes, pedal pressure is GONE.

    when i did mine it took me doing it alot to get a good pedal. i started on the back pass rear then back drivers then pass front then the drivers front. i did that about 6 times before i got a good pedal. i did a new mc,front aerospace,and wilwood 4 piston rear, line lock. i used alot of brake fluid
  4. faststang90

    Pros and Cons of a Fuel Cell

    if u take it to the track they may not let u run it if u dont have the bulk head. u need to vent it and cap it if u dont have a return type reg. if u go with a cell get 1 that does not have the fittings that are removable my friends car has them and they leak fuel.
  5. faststang90

    Wilwood 4 lug kits, help me fill in the blanks.

    i did it for a mustang and it shows 2.5 offset. i jusst did them and i want to say the offset is the depth the cal is set off not the width Rear Brake Kits Ford&axleoffset=
  6. faststang90

    Just got Solid motor mounts/something looks off?

    i have broke stock type mounts with my old motors. so i just do solids my car its a drag car only. it was not alot of hp but i still broke the mounts. i have a friend that he is on stock mounts and he put 769 to the rear tires. his car is a cobra and im sure they have go better mounts than what...
  7. faststang90

    Just got Solid motor mounts/something looks off?

    the bolt is 1/2. mine r upr mounts
  8. faststang90

    Just got Solid motor mounts/something looks off?

    i was told to run solid mounts. my tranny crossmember u bolt it to the trany no mount so its solid to. u run solids to stop from breaking the mounts when u make alot of hp
  9. faststang90

    Just got Solid motor mounts/something looks off?

    they look big but here is mine
  10. faststang90

    How would you separate these two ???

    i think u could get it a part but getting it back together would be hard. i would check with a body shop and see if they have a tool to do that with.
  11. faststang90

    where inside is the torque box located

    lower box
  12. faststang90

    Looking for a fox coupe model (die cast or plastic)

    here is a 85 coupe 1985 Ford Mustang LX "Dark Horse" Diecast Car Model 1/18 Black 1 of 1000 Made by GMP
  13. faststang90

    Looking for a fox coupe model (die cast or plastic)

    i seen some at a swap meet. they was dc 1:24 they told me they was coming out with them but they was 100-150 each
  14. faststang90

    Wheel hop question

    check your bushings on the contral arms also check the spots where it bolts to the car u can run with out the quad shocks without problems. i have been without mine for years on many of my cars
  15. faststang90

    Fuel Cell in a Fox Hatch

    on mine i cut the back out between the frame and installed a flat plate and bolted a 10 gallon cell.
  16. faststang90

    First time Fox buyer: Things to look out for?

    look at the tq box area to see if they are not broke or in bad shape.
  17. faststang90

    Installing new door handles

    i think it was a 1/4x1 inch long bolt. i did not use a lock nut just a lock washer.
  18. faststang90

    Installing new door handles

    the rivets are hard to use. i just did 1 and i used small bolts with a lock washer,flat washer u cant see them so u dont even know.
  19. faststang90

    Where to Find a Nice Drag Car (Mustang)

    he said it went a 9.17 on a 150 shot. the car is set up to run off 3 kits. he has only ran 1 kit in it. the car has nos kits to go up to 750 hp in kits on it but they have not been wired in. i will im u on more info.
  20. faststang90

    Where to Find a Nice Drag Car (Mustang)

    no he got the car with the cage in it. he did the paint about 3 years ago. he just dont race it any more and he just got a 07 gt he doing now
View older results
Top Bottom
Back
Forums
Menu