Search results

  1. 94tang

    vibration in motor,after shift balancer??

    i have a weird vibration in my engine too...startd about 1700 and stops around 2200....ive changed the balancer but it didnt help
  2. 94tang

    How to remove valve springs?

    The compressor im using is the kind you can remove valve springs with the head still on the car so i dont have a lot of hitting room,but i know what you are saying.I have tried hitting the "cup"/locks with a hammer and screwdriver but they still wont budge.....:shrug:
  3. 94tang

    How to remove valve springs?

    I got a set of good used E7's dirt cheap and was going to do a little "work" on them.when i compress the valve springs i cant get the locks out.There is a little cup that they're sitting in and they seem to be stuck.....as you can tell this is my first attempt at doing head work on my own so any...
  4. 94tang

    Squeek in the front suspension

    went thru the squeaky stuff myself.....turned out to be a bad ball joint which actually broke on me.....luckily i was just moving the car around at home and not on the road....that what have sucked many times over!
  5. 94tang

    Roller rockers....stud vs. boltdown?

    whats the average price to have a set of E7's machined for 3/8" studs?
  6. 94tang

    Roller rockers....stud vs. boltdown?

    What are the pros and cons of each?Is one better to have than the other?
  7. 94tang

    TPS voltage.....?

    Ive had the battery unhooked for about a week.after doing this the car doesnt run right anyway...after a few days of driving it usually clears up and runs/idles better but its never idled that high from the get go....also i really couldnt tell much difference when i took it for the initial run...
  8. 94tang

    TPS voltage.....?

    oh and the voltage goes up to around 4.6v at WOT
  9. 94tang

    TPS voltage.....?

    It idles,but around 1500rpms....what is the IAC bleed screw?
  10. 94tang

    TPS voltage.....?

    Does setting the voltage to .95-.99v apply to aftermarket throttlebodys too.Ive just installed a BBK 70mm along with a 94 Cobra upper and lower and cant get it any higher than .70v.....should i be concerned?
  11. 94tang

    new times

    mph needs to be closer to 95 for 14.70's
  12. 94tang

    Is there such a thing?

    they also have the brake lines
  13. 94tang

    BBK 70mm throttlebody......?

    not fighting......i didnt know if i would have driveability issues with the 70mm
  14. 94tang

    Is there such a thing?

    50resto.com has them....
  15. 94tang

    BBK 70mm throttlebody......?

    intake opening is 75mm
  16. 94tang

    BBK 70mm throttlebody......?

    i saw a web page on the 'net that this guy ahs for his '94 Cobra.He put the same throttle body on his car with basically the same mods as mine and actually lost hp.....his testing method was going to the local track and comparing times with his new tb against his old times........so everyone...
  17. 94tang

    BBK 70mm throttlebody......?

    I got a good deal on a '94 Cobra intake that also came with the before mentioned throttle body.I know it is way too big for my motor but was wondering what the adverse affects would be.Mods are listed below....thanks for the input
  18. 94tang

    oil change question

    the 3 month thing is just mainly for regular oil as the heat cycles and stress start breaking the oil down.....synthetics are not affected by this as much therefore lasting longer
  19. 94tang

    95 Stang GT nitrous

    Hes running Holley,Lunati cammEdelbrock Performer intake.....oh yeah forgot to mention it is wet shot.....he uses the plate that goes in between the upper and lower intake
  20. 94tang

    Airbag light.....?

    i knew the definition for the code,i was just wondering if anyone knew what was causing it or a fix for it.........thanks for the input though
Top Bottom
Back
Forums
Menu