Search results

  1. P

    Trying to put an LCD in DASH

    If you really wanna try to do it yourself maybe try something like http://selectproducts.com/frames.html to help you. Just a suggestion.
  2. P

    Ventvisors, yes or no?

    I like the functionality of them and like the way they look too.
  3. P

    Xenon bulbs any good? Not headlight

    Yeah seems like everyone's talking about headlights and they are burning the wiring harness' because of the high wattage. As far as your first question goes, yes they can be noticibly lighter but only go with name brands. I like PIAA and Eurolites for the small wedge bulbs in the corner and the...
  4. P

    Cobra Rear Bumper(s)

    Most other places do their products in Fiberglass. Only recently has abcexclusive recently done all their products in polyurethane like Cervinis.
  5. P

    Projector Headlights from 50RESTO??

    It comes with it but I believe it is an H-3 according to 50resto.
  6. P

    Projector Headlights from 50RESTO??

    The headlights come with the projector light but you have to hook up the projector lights up to a power source and splice it into the headlight wiring harness and then you will be able to turn them on. It comes with all the neccesasary connections and toggle switch and is pretty straight foward.
  7. P

    Need help quick Smooth windshield cowl cover???

    Glad I could help!!
  8. P

    Need help quick Smooth windshield cowl cover???

    got mine from here http://gteffect.com/ like the way it looks and was easily painted.
  9. P

    Replacement seat ????

    Picked up my Corbeau CR1's from http://apexperformance.net/ he'll work on the price with you and he's really friendly.
  10. P

    Memphis Amps?!?

    I have had 2 Memphis amps for almost three years and there are great. Good looks, great power and relatively small size.
  11. P

    Vacuum Question

    Hey i am installing a vacuum guage (I know serves no real purpose but got it free) and I hooked up the vacuum line to the air check valve. It works till the cars warms up a bit so my question is what is another vacuum line that is constant. I was thinking maybe the egr valve line?? Thanks for...
  12. P

    Help installing Dyno Mod on Distributer

    Here's the link to the tool: http://secure.50resto.com/product1.cfm?SID=1&Product_ID=2156&Category_ID=799 You also have to take off the distributor to take the module off.
  13. P

    help with amp......please!!!

    Sorry I meant to say that you should not really run front and rear speakers off the same channel.
  14. P

    help with amp......please!!!

    The ohm load depence on the impedence of the speaker. If you run all those speakers on each there own channel output on the amp, they will run at 4 ohms. However, if you ran two speaker off of one channel, the impendence would drop down to 2 ohms. That that you should run front and rear spakers...
  15. P

    Just bought screamin demon,Anygood?

    I have been using that coil and dyno mod for a couple months now and it seems to me to be the best, even over msd and accells.
  16. P

    Whats a good coil to replace the stock one??

    sorry that link was http://www.performancedistributors.com/
  17. P

    Whats a good coil to replace the stock one??

    After buying MSD's and Accells I went with www.performancedistrubutors.com screamin demon coil and I have been very happy with it.
  18. P

    3G Install gone wrong??

    With my 3G Alt I had to use a 1/2 inch shoter than stock belt to work with my underdrive pullies.
  19. P

    Coolant overflow and EGR valve

    If you go with a plastic one now it's just going to break again down the road. Do it once and do it right with Cantons overflow tank. It'll be more expensive but you'll only have to do it once. Check it out here: http://www.cantonracingproducts.com/new_products.html
  20. P

    3g Alternator upgrade

    I experienced the same probably with underdrive pullies and found out that I needed a 1/2 inch shorter belt than stock.
View older results
Top Bottom
Back
Forums
Menu