Search results

  1. ID89GT

    Getting A Fox As A First Car

    Manuals are way better. I won't even look at an auto fox.. Something about being able to peel out while already rolling is just something I love to do.. haha.
  2. ID89GT

    Well, Getting Out Of The Fox Game

    You have a super clean car, would be a shame for you to get rid of it. But everyone has there different interest, and people do get bored with things. Hope whatever you choose you are happy with :)
  3. ID89GT

    Getting A Fox As A First Car

    Unless you have a pretty decent job and are somewhat mechanically inclined, I wouldn't recommend a Fox. These cars are getting to be 20 years old now and will need stuff replaced. Can turn into money pits really quickly.
  4. ID89GT

    4cyl To 5.0 Swap Help

    And a 91 dash harness won't plug into the 86 dash stuff.. so really you would have to swap the whole dash along with all the electronics.. Would be much easier just to find an 86 5.0 harness and swap that then to try and get the 91 stuff to work.
  5. ID89GT

    Whats This

    Ya those are a pain to make not leak.. Especially with the lower intake still installed
  6. ID89GT

    Its Like It Wants To Jump Off The Car.

    If its an auto, id check to make sure your flexplate ain't bent.
  7. ID89GT

    Its Like It Wants To Jump Off The Car.

    Can you hear any noise coming from that area while the car is running? Like a grinding or banging
  8. ID89GT

    So Did A Tune Up Last Night, Found Some Disturbing Things -

    Do some compression testing and leakdown testing to verify what the problem is
  9. ID89GT

    Oil Pressure Dropping Help!!!

    Put a mechanical gauge on it, also would check the oil level itself just to rule it out.
  10. ID89GT

    Intake Bolts

    Lower or upper bolts? All lowers should be the same size, uppers in your case im not sure on.
  11. ID89GT

    Mustang Wiring Guru?

    Lol k.
  12. ID89GT

    Fuel Pump Gets Loud

    Its a piece of cake, if you get the walbro that comes with the install kit its really straight forward. Undo the straps, and you will probably have one bolt that holds the filler neck bracket to the tank as well. Undo that then drop the tank, moving it towards the driver side so the filler neck...
  13. ID89GT

    Mustang Wiring Guru?

    The EVAP system doesn't harm anything by keeping it, you would only be hurting yourself if you were to take it out.
  14. ID89GT

    Nwc T5 Woahs :[

    Suppose to take the Mercon. The fine bearings need the auto tranny fluid to be able to get in there, whereas the gear oil is very thick and hard to reach the small needle bearings.
  15. ID89GT

    Mustang Wiring Guru?

    The last one is the EVAP purge solenoid. Should be a vacuum line that comes from the charcoal canister to that, then from that to the upper intake manifold.
  16. ID89GT

    Street Size Turbo?

    Buy an on3 kit.
  17. ID89GT

    Engine Hoist Adjustment?

    No, just the floor or anything really. Hell ive even let it rest on the k member before just sitting in the engine bay haha. As long as you let it down really slow and don't like slam it it will be fine. The oil pan is pretty strong.