Search results

  1. Dagz

    Pics of my new 67 "was it worth 5000"

    thanx chuck, but way more work to go, i plan on installing a full body kit from mustang depot later to finish the car off. What i plan on going with in suspention is a 2 inch shelby drop, i'm going to box in the control arms to stiffen them up, then new coils, urathane bushings or something...
  2. Dagz

    re-wiring headlights

    hey i was told that if you just dissconnect the drl module altogether then you wont have driving lights and no problems. Tell me what you think Dagz
  3. Dagz

    re-wiring headlights

    right on, your the man, i will just pull out the shop manual and look. For eveyones info i have both shop manuals availabe for this car as i work for the dealer. Feel free to ask i will try and help Thanks again Dagz
  4. Dagz

    Pics of my new 67 "was it worth 5000"

    Trailer it ya right! The only reason that happened was because that was when I first got the car i made the deal on the spot, it was sunday so no insurance, went home grabbed the trailer and loaded it on before the guy changed his mind. That is it sitting in my back yard that first day, not to...
  5. Dagz

    re-wiring headlights

    alright, sorry about that, here comes the dagz decoder ring. All i want is to get rid of the driving lights. I only want my headlights on when i pull out the switch, not when the switch is in, and th car is on. This way when i drive around at night (dusk) all you can see is the corner...
  6. Dagz

    re-wiring headlights

    hey boys, i wanna re wire the head lights and get rid of the driving lights, so at dusk when i drive around i only want the corners sculcar lamps on with the fog lights ( and yes I have seen the wiring diagram to make the fog lamps operate when the head lights are off ) Anyone got any ideas...
  7. Dagz

    Pics of my new 67 "was it worth 5000"

    you suck! hahaha, ya that's a great deal nice car, congrats! Take a look at my $1500 car in my garage, sorry wrong computer to post pics, and that's canadian dollar. Good to see you can still buy hot rods for not a lot of money these days. Dagz
  8. Dagz

    Drilling for the Emblems...

    3M tape is the only way to go. I would never drill holes in my car for an emblem, like you said just grind them off and then sitck them on. Prep the surface with something alcohol based and let it dry. Red backing 3M is strong like stated above. If it's wrong heat it up a little with a heat...
  9. Dagz

    timing her in

    ya tried resetting the ECU but a no go, and six is just to retarted. Might be the heat and dense air here in BC i dunno anyone else, oh ya by the way is 10* stock?
  10. Dagz

    timing her in

    well boys i decided to throw the light on the car to find out where i was. I disconnected the spout conector and found the caar was at 6*, which is kinda weak took a couple cranks to get her to fire. I advanced the timing to 12* ( I think that is 2* advanced correct me if i'm wrong ) And of...
  11. Dagz

    V6 gauges in a V8 car

    oh ya by the way i am canadian eh, so mph don't mean much to us it's all about the km but thanx. ps no emission laws over here so if it is factory equipment and the only thing it is doning is robbing hp or weight, throw it out no one cares. I will be long gone before i need to wory about...
  12. Dagz

    V6 gauges in a V8 car

    thanx phil, I figured i was out on the rpms. as for the rest I know the red line is different and the speedo but that doesn't concern me it was how accurate it was. I do have the cluster and yes it will just plug in, but when you ca bury the tack in the thing you start to wonder if it is...
  13. Dagz

    V6 gauges in a V8 car

    k boys here's one for you, i recently swapped a 302 into a V6 car. Everything works great and of course plenty of tire burning hose power, but my question is are the tach and the speddo accurate with the V6 cluster. It seems to me that the tach is out 5 or 600 rpm, but idle is ok. What do you...
  14. Dagz

    Big Prob! Smog Pump Delete and ABS Motor

    screw it, why not just run a shorter belt, it's cheaper! I run a 90 on mine and it work great there is a diagram on here if you search to show the new route. I run stock pullies with ac by the way Dagz
  15. Dagz

    Is smog delete pulley same as Fox?

    I don't think so they have a different fr. cover and belt system, but if i were you i would just run a shorter belt with a different config. If you search for it you will find it. I run a 90.5 on my car and it works great Dagz
  16. Dagz

    IT"S ALIVE!

    Well boys after waiting for my bellhousing and fuel lines to finally come in I had the day off yesterday and was able to bolt the rest of the car together and fire the new 5.0 up, and man does it ever sound and run great! No check egine light, and just fired right up with no compications. In...
  17. Dagz

    POLL!!!!!!!BEST MUFFLER!!!!!!!POLL

    Flowmaster 40 series, nothing sounds like a 5.0L with flowmaster mufflers. But i would like to try some mac's Dagz
  18. Dagz

    NGK Aridium Plugs

    ya i kinda wondered, all i am running is few basic mods on the car. Msd 6AL ignition, 8.5 Msd super wires/cap rotor and distributer, BBK shorties, no cats x pipe 2.5" flowmasters 40 series, smog pump delete, cold air intake, and a center force dual friction clutch, on a new Valcun stove...
  19. Dagz

    NGK Aridium Plugs

    Just like the title says has anyone or does anyone use these and what are your thoughts in the 5.0 Thanx Warren
  20. Dagz

    can i put a 95 cobra intake in my 1990??

    yes they are alot different, maf, throttle body, air intake, egr set up, or you can covet it, but that is still too much like work... But i have a 95 5.0 and i could use it if the price was right, but i would have to ship it to Canada BC. Oh ya is it the upper and the lower or what...
Top Bottom
Back
Forums
Menu