Search results

  1. W

    2001 Cobra Common Problems?

    Thanks, I knew the GT's had this. Just wasnt sure about the snakes. :nice:
  2. W

    Injector change on 99+ Cobra

    I swapped out my injectors in 30 minutes without removing the intake. The fuel rail does not come out. You don't need it out. You just need to pull it up far enough to remove the injector. Not hard at all. You do not have to remove the intake. Do it if you want to though.
  3. W

    98 cobra HP limits (before breaking)

    We have a guy in Alabama, Brian Bradford, that just blew his up. He had run 350 passes and most of then 10's. Most recent dyno numbers were just over 600rwhp. He was tuned by Chris Johnson of JMSchip.com. The motor was stock oil pan to TB and he was running a S-trim pullied for about 20 psi.
  4. W

    Ran a [email protected] 3.27 Gears, NA!!! 3476 lbs!!

    JayZ, Can you explain your mods? What is LM? Sorry if it sounds like a stupid questin. I believe you about your times. First time out to the track in my 02 GT CONVERTIBLE with no weight reduction I ran a best of 13.72 at 103 mph with a 2.15 6o ft time. I ran a few other high 13's. Mods...
  5. W

    Injector change on 99+ Cobra

    No, the 99+ cars have a different intake then the earlier cobras. I didnt not have to remove the intake. You will have to remove the intake tube, but othetr than that its a snap. You will need harness adapters if you have the pencil style injectors and are going to normal bosch style. I...
  6. W

    2001 Cobra Common Problems?

    I have had ZERO problems from the tranny. No vibes as previously stated. I am not sure, but I think the tranny are different from early to late 01, same for Gt's. The later cars have tremec 3650's which is much stronger than the t45. Only real issue I have is with wheelhop. I have...
  7. W

    looking for a procharger for my buddies 01 cobra

    6-8 psi? I don't think so. With a good tune, you can easily run 10-12 psi and see 450 rwhp+. Its all in the tune. I have been running mine setup with a 3.2(10 psi GT pulley) and seeing 13 psi at 6500 to redline. I have 10 psi by 5000 and 5 psi by 3000 in cool weather. The P1SC is great...
  8. W

    DUW: IRS bushing install with pics

    Well, can you tell a difference as far as the bushings go? I am interested. I hate wheelhop.
View older results
Top Bottom
Back
Forums
Menu