Search results

  1. C

    Electric Water Pump ???

    I tend to disagree with almost everything you have stated. Like Uncle Meat said, it's like comparing apples and oranges when you talk about a fan and a pump. One moves air and the other moves a liquid. I think that the third paragraph of your statement is the only valid arguement in this...
  2. C

    What N/A bolt-on is proven to give the most WHP?

    I would check with the manufacturer's of the header's, as well as the CA DOT. You may be able to get away with it if they have CARB EO #'s, but I don't know if any l/t's have them. Good luck with it, and if you can't go with headers, get the 4.10's. Your seat of the pants dyno will tell the...
  3. C

    My Spark Plug Experience

    Usually when you learn the hard way, you never forget it:D
  4. C

    Suspension or more hp

    Go with the suspension!!:nice:
  5. C

    What N/A bolt-on is proven to give the most WHP?

    I'm in the low country where we don't have emissions testing:nice:
  6. C

    My Spark Plug Experience

    Hey man shiot happens! Like svtteck said, it could be worse. Sometimes you have to learn the hard way.
  7. C

    Play in front wheel

    Pickle fork w/ air hammer is probably your best bet to get them out. But I've honestly never done them on a Mustang so anybody please feel free to correct me if I'm mistaken.
  8. C

    Play in front wheel

    You could get some big pliers and try to sqeeze the suspect balljoint. If you feel it click or if it has play in it, it is bad. Also, look at the balljoint while you rock the tire up and down (or whichever direction you feel play), and if it is moving it is wornout and should be replaced. If...
  9. C

    Squeakin noise!

    Def. balljoints or tie rod ends
  10. C

    What N/A bolt-on is proven to give the most WHP?

    What are the best l/t's as far as quality and power?
  11. C

    Bolt in subframe connectors

    Go to a shop with 4 post or drive on lift. Probably a muffler shop or a place that does alignments is your best bet.
  12. C

    Powerslot -vs- Brembo Rotors -vs- Cheap-O's

    I have the setup you are asking about and have no problem with it at all. It performs and looks much better than stock. I have the 13" Brembo D&S rotors in front w/ Cobra calipers and some D&S Brembo's in the rear as well. I have done some high speed braking with it and have not noticed...
  13. C

    Tire/ Wheel question

    I've got Falken Ziex 512's on my car and I really like them. They are a very good street tire that grips good both in the corners and at the strip. The tire sizes you have in mind sound right on the money. They shouldn't rub. Although I don't know if they make the Falkens in that size. The...
  14. C

    Tranny Question

    I don't think you bent anything. It sounds like your shifter bushings are going out on you. I'd upgrade the shifter now if you have the cash. It's money well spent.
  15. C

    Difficulty: Throw Out Bearing

    Haha you have a point. But I didn't think they were ever dead...At least they weren't to me.
  16. C

    I made a challenge and need some help....

    Bring a gas can if possible. Put your tires at 20 and learn how to powershift. Good luck dude, I hope you prove you're right. It is very possible.
  17. C

    Difficulty: Throw Out Bearing

    Rock on brother:nice:
  18. C

    T45 Diagram?

    There's also another diagram on hanlonmotorsports.com. Just FYI
  19. C

    Difficulty: Throw Out Bearing

    13mm swivel socket and a real long extension will get all the bellhousing bolts. What's the best way to get at those freakin starter bolts. I got mine out but there has to be an easier way. Hell that's the hardest part of taking the trans out!!
  20. C

    T45 Diagram?

    There is a real good diagram you can find on drivetrain.com. Just type in T-45 on the part locator on their website and it will take you to a link you can check out. If that doesn't help, I have a PDF file that tells you everything about how to take the trans apart and what goes where. I...
Top Bottom
Back
Forums
Menu