Search results

  1. S

    How much does a Fox body weigh?

    on the 92GT, the fog lights and mounting hardware weigh around 8# total. I'd probaby guess the smog pump is in the 7-10# range.
  2. S

    How much does a Fox body weigh?

    SUBSCRIBING I just picked up a virgin 92 notch with 31k on. Plan on hitting the scales over the weekend. I'll get back on here once I get the ticket.
  3. S

    Need Help ASAP... Please!

    We were only a tooth off, but when I went to move the distributor, I went the wrong way and ended up going all the way around. I got a car last night, but thanks for the offer. Picked up a 92 notch from a private seller down near allentown. Black on black, 5spd, w/chrome ponies. It's...
  4. S

    Need Help ASAP... Please!

    What dealer do you work at? I'm probably going to be up in the Kingston area tomorrow, possibly as far up as Carbondale. You anywhere in that area? Just remembered that we had a similar problem a few weeks ago. ProCharged 94GT. Fired it one night long enough to make sure it was going to...
  5. S

    AFR fellas

    Nice hood :nice: What kind is it? How's the fit? How much clearance did you pick up. I've got an R hood to go on, but I don't think it's going to give me enough room. thanks, Jared. .
  6. S

    Opinions on a rear gear change

    I vote for 3.89s :nice: (or 3.90s for an 8.8) I'm putting in 3.89s for the new motor and I'm planning on shifting around 6800-7000. Best I can recall, that should put me through the traps at around 6200 or so in 4th gear with a 27" tire. I think...it's been a while since I did the math.
  7. S

    Good Rail Mount Fuel Pressure Gauge????

    If you have any interest in supporting your local businesses, you might check out Stewart Warner or Stewart Warner Performance. I don't know if they offer the 1-1/2 for the rail or not. But their products are all manufactured in Lancaster. :nice:
  8. S

    Stabilizer Bar

    Your driving style will determine how much you miss them. If you like to run hard through the corners, then you'll notice immediately. I've had both mine off for quite a while. Took a little while to get used to, but now I can run the same corners just as fast as I could before I took them off.
  9. S

    Need Help ASAP... Please!

    What's your fuel pressure look like? You still work at a dealership? I'm car shopping :nice:
  10. S

    quick question

    change the one that's causing the code
  11. S

    How many grams do rods and pistions weigh?

    I think my lightweight I-beams are around 600g. Don't recall the exact #. I'd have to guess that a 1000g scale would adequately cover just about any SBF connecting rod.
  12. S

    fuel pressure and timing questions

    You always set the fuel pressure at idle with the vacuum removed from the regulator. Since you don't have any dyno #s, I'd use the 320HP that the motor is advertised at and do the math. Figure out how much fuel is required for 320hp. Then figure out what pressure your 30s need to be at to...
  13. S

    fuel pressure and timing questions

    Any useful information to back that up or is that just some magazine tech talk? I'm not flaming you because I'm aware that most people don't fully understand fuel requirements and the only source of information that a lot of folks get is what they read in magazines or catch on HorsepowerTV...
  14. S

    funny ricer accesories.....

    That's too funny :rlaugh: I destroyed a Maxima last summer that was doing something similar. It sounded a lot like that ad. At the time I thought it sounded like a nitrous purge and decided that they must've had a CO2 bottle hooked up for a similar effect. They were really pissed when I...
  15. S

    fuel pressure and timing questions

    Any dyno numbers? 30# injectors are overkill for a 320hp motor. My motor ran ~320hp on 21# Accels @ 37psi. I can email you the dyno sheet with A/F graph if you're interested. Best run of 13.5 @ 104 with terrible traction. Timing at 16 degrees. I'd get some smaller injectors and go from there.
  16. S

    What high performance fan i should choose ?????

    Here's a 16" & 2700cfm for $125 then add a Flex-a-lite controller for $40. I just got twin 12's for my 95 off eBay for $140. The 16 is 3-1/2" thick and the 12's are 2-1/4". They sell the kits with the controller on eBay also. Good luck.
  17. S

    whats size t-body?

    :stupid: Yeah, what he said. If it were my choice, I'd go for a 73/76mm C&L before a TB. Then an intake upgrade. JMO
  18. S

    Real diff between A9L and A9P???

    Ford also says to lift your foot from the accelerator pedal prior to disengaging the clutch when changing gears in a manual transmission. :bang: Yeah, right :D
  19. S

    new times with the 331 (im getting there)...

    Hmmmmm? How much does that tank weigh? :D Not to dog you, but I was running 104 with my old setup on street tires. For wires I'd recommend the Taylor Thundervolt 50 or Accel Firewires. 50 & 25 ohms/ft respectively. I've got an extra set of the Taylors. Give me a call if you want to try...
  20. S

    got my @ss handed to me by buick Grand National

    What was so embarrassing about it? :shrug: You got beat by a reputable performance car. A legend if you will. No shame in that. Come out along side me at 55...we'll goldrush it and when I'm still running even with you at 100, then you can be embarrassed if you want. :D BTW, I'll be in my...
Top Bottom
Back
Forums
Menu