Search results

  1. wms004

    Quiet off-road exhaust

    Quietest you are going to get is magnaflow or SLP's new Power-Flo mufflers.
  2. wms004

    SLP Exhaust Questions

    http://videos.streetfire.net/search/full%20slp/0.htm I'd suggest the LM2 catback if you are going full exhaust. Otherwise its going to be too loud for you to be able to think. I just put on the LM2 and I'm real happy with it. Wade
  3. wms004

    Aluminum Steering Rack Bushing Question

    Urethane won't provide a very noticable difference over stock. I have the Aluminum bushings from MM and they are fine- don't create noise or anything. If you have the stock K-Member use the center holed bushings. The offset ones are known to turn. You will need alignment afterwards because...
  4. wms004

    99-04 Maximum Motorsports Control Arms

    Steel. They weigh like 2 pounds more than the steeda alum's.. Steel is much better because if you hit a good sized pot hole metal will bend as opposed to aluminum snapping. Wade
  5. wms004

    Magnaflow or Magnapack?

    I ordered the SLP Loudmouth II catback for $380 shipped from www.lmpperformance.com . Its also fully 304 (high grade) stainless steel so you don't have to worry about rust. Its got an aggressive sound, even with stock H. Its being installed in 3 days. Wade
  6. wms004

    Lose The Rear Cats, Lose Torque.

    The first 2 "cats" you still have are preheaters, so technically your car doesn't have cats right now. Switch to a catted x pipe and I think it will feel better all around WAde
  7. wms004

    Catback Opinions

    Alright. The flows have sounded great with the magnaflow X, but I wanted something a little more aggressive sounding, and better flowing. As long as there's no rasp and gargling I should be a happy camper Wade
  8. wms004

    Catback Opinions

    I hope the LM2 isn't too loud. I'm getting it installed Wednesday and selling the 2 Chamber Delta flows that I was attached to for so long. I'll be making a video to share the sound it makes with a magnaflow catted X. Wade
  9. wms004

    Caster/Camber - Alignment?

    I figured it was normal on my car too, untill I found out the alignment shop neglected to tell me that my camber was as positive as possible, which was about 1.5 degree negative camber. Insides of the tires will wear out quicker, so next time you get alignment stand there with the alignment guy...
  10. wms004

    Downshift points

    Take 3rd Gear to about 4,500ish RPM and see XMPH. XMPH is about the speed you should downshift to 3rd at from 5th.
  11. wms004

    Tax Refund. What to spend it on? Suspension, subframes, etc.

    If you are getting suspension, either go with H&R Race/Bilstein (or better), otherwise don't bother. I think X pipe and gears would be more worth it. Gears= $140 Install= $200+ X Pipe= $250+ Tune= $400ish pretty close to 1000 and you'll notice a difference Wade
  12. wms004

    03' Cobra Spoiler INSTALL on 02' GT, Questions!

    1. Randy S. From Modulardepot.com 2. Put a little putty on the ends of the bolts coming out of the spoiler, and just set it down (little bits of putty mark the spots roughly). I don't remember the drill bit size, but whatever will just fit inside the 2 original holes. 3. The red stuff you see...
  13. wms004

    03' Cobra Spoiler INSTALL on 02' GT, Questions!

    Here's my write up. I just put 2 plugs in there for now. Doesn't bother me http://forums.stangnet.com/showthread.php?t=566133&highlight=cobra+spoiler+write Wade
  14. wms004

    LCA/UCA suggestions for mountain carving...

    What are the spring rates front and back for the BBK's? I had the bullitt springs (600lbs. front and 250lbs. rear) and they weren't stiff enough for me. So I ended up spending more money by doing it right, which meant MM stuff. I'd recommend at least a spring with over 700lbs. front and...
  15. wms004

    coil over ??

    Maximum Motorsports front Bilstein C/O w/ 350lbs. springs. WAde
  16. wms004

    Spring Rates

    I have the Super Race springs just in the back with Bil HD's, and trust me, the ride quality is just fine. For the front the HD struts would be fine for the Race and Super Race springs, but the 03 Cobra bilstein struts would be better for the Super Race. Either way you are pretty safe, but if...
  17. wms004

    Help with wheels please! - Offset Question -

    Yeah, they will stay close to the fender within that range. If the offset is 27+ in front with an 18x9 you could see some rubbing. I have a slight tire rube with 265's in front on hard full lock turns. Wade
  18. wms004

    Help with wheels please! - Offset Question -

    45mm would actually be tucked in too much. Lower the number the more the tires stick out. The Saleen 18x9's are 24mm offset, and the 03 cobra/AFS 03 Cobra replicas are 26mm. Here's mine with 26mm 18x9 (front wheel is dead in line with the fender) Wade
  19. wms004

    bbk intake tube?

    www.tunableinduction.com sells the Throttle body pipe for 65 shipped. I just got one a couple of weeks ago. Wade
  20. wms004

    Spring Rates

    Stockers are 450 lbs front 210 lbs rear If you want the car to handle with minimal body roll and not lose ride quality: H&R Super Race with Bilstein HD's Wade
Top Bottom
Back
Forums
Menu