Search results

  1. ShortThrow50

    347 Stroker build (pics)

    YEah I left them unported. I may have them ported when i get bored of the setup but right now Im tryin to keep this project as cheap as possible. Im so tired of spending money on this thing LOl. As far as the cam, same thing, i went cheap with a tfs stage 2. The engine, im sure has lots of...
  2. ShortThrow50

    347 Stroker build (pics)

    woody at fordstrokers.com
  3. ShortThrow50

    "As Craigslist Turns" Funny Emails

    +1
  4. ShortThrow50

    347 Stroker build (pics)

    Im still not finished becuase there is other little BS I want to do, so it wont be going in for a while. Plus its winter and I need to work on something. Ill get some more pictures up at a later date when im finished.
  5. ShortThrow50

    What parts are hard to find?

    no bro. i forget what company but you could probably find it with a search. You can get the quarter windows w/mustang logo" brand new
  6. ShortThrow50

    Anyone ever break a crank like this? *carnage inside*

    did you call autozone then
  7. ShortThrow50

    MASS AIR METERS FOR A 347 STROKER

    C and L 76mm calibrated for 42 pound injectors. Never once have i ever encountered a problem.
  8. ShortThrow50

    Cam, Maf and intake question

    I have always used c and l 76mm with zero problems and im pretty sure the intake opening is only 70mm. Some people will prolly tell you to spend more money and get the pro m. I personally know of noone that uses a lightning maf.
  9. ShortThrow50

    Strange Winding Noise and Vibrations

    Check and see if those guys painted marks where the driveshaft mounts up to the differential. These marks would be so they know what bolt holes the thing was bolted up to originally for balance purposes. If they didnt make any marks, then im almost positive they didnt put it back on right. If...
  10. ShortThrow50

    Help buying engine gasket set

    Im just getting into the whole stroker thing too. that is a great gasket kit and those are felpro head gaskets. im almost positive that they are felpro 1011's in that kit which are goot all the way up to a 351 windsor. someone will be able to clarify soon so dont mark my word
  11. ShortThrow50

    302 stroked or 347

    The question doesnt really make any sense buddy. Its either you want your "reliable" 302 or you want a 347 stroker. If you do a stroker, your gonna be puttin all new parts in it and getting alot of machine wrok a prep done. In the long run, its cheaper just to buy a brand new build 347 stroker...
  12. ShortThrow50

    Anyone have problems with fan clearance after new motor mounts were installed?

    I put those 150 dollar energy suspension mounts in an i use the stock fan, radiator, and shroud. Never had one issue. Maybe the guy didnt have the motor seaed all the way in. You have those two little nipples on the mounts that most seat in to the holes. Maybe they werent and you tightened the...
  13. ShortThrow50

    What head gasket for 347 stroker?

    Yeah i did just get it in may. Honest to god, I woke up one morning and said to myself i want to build up a 347 stroker n/a to see what all the hype is about with low end torque. So i sold the blower and transfered the money right over to fordstrokers.com and had him build me a stroker. Eh, i...
  14. ShortThrow50

    Engine Build Questions

    your block wont crack at 400-450 hp. I had at least 430 at the crank. I can think of how many people i know of who are close to 500hp. For people to say its gonna crack at 400 hp is rediculous. Just my opinion
  15. ShortThrow50

    What head gasket for 347 stroker?

    Thanks guys. Im sold on the 9333's then. For the record, im not runnin the blower anymore. Going N/A this time around
  16. ShortThrow50

    What head gasket for 347 stroker?

    Well, i want to know from guys that have been there and done that so thats why i have these questions. What about the copper ring the 1011's have. does the 9333's have these feature as well? Sorry for all the questions. I just hate doing things twice. Sell me on these 9333's
  17. ShortThrow50

    New Engine Build for my 90 GT need some help

    yeah, id say that build price is about right, but for the same amount of money you could prolly do a 331 or 347 stroker too.
  18. ShortThrow50

    VIDEO of the dads car.

    heyma, whats he got under the hood?
  19. ShortThrow50

    What head gasket for 347 stroker?

    Ok guys, i just looked that up on summit and it seems to be about 15 bucks cheaper then the 1011's. Why would you go with the cheaper felpro rather than the more expensive ones? thanks for the input
  20. ShortThrow50

    New Engine Build for my 90 GT need some help

    Well your not gonna see 350-400hp out of that 302. Flywheel horsepower you might see close to 350 but how you gonna dyno that? When i was just running the trick flow top end kit and all supporting mods (tb, injectors, smog delete, full exhaust, etc,etc) i put down 290 hp and 320 torque on a...
Top Bottom
Back
Forums
Menu