Search results

  1. iluv95stangs

    coil springs??

    Thanks for the replies. I was just wondering because I had heard from different people that it could be done. I still don't know if I'm gonna try or not. It won't take me long to do it. I work at a shop with a lift and have changed mustang springs before.
  2. iluv95stangs

    coil springs??

    Anyone else??
  3. iluv95stangs

    94 Cobra, anybody have this or know wut the problem is????

    Sounds like maybe your mufflers or midpipe are out of adjustment and hitting they underside of your car.
  4. iluv95stangs

    I'm Stumped. Anyone?

    Module is in the trunk on the driver side inner quarter panel behind the carpet. Turn the ignition on and short the connectors of the plug that is just hanging there with nothing plugged into it. Push any button on your remote and the any button on any other remotes you have and then pull your...
  5. iluv95stangs

    Need A/C help?

    There is a vaccum line that runs from the driver side of you firewall to the passenger side. It is very small and goes into the firewall on the pass side. It probably broke somewhere around your upper intake.
  6. iluv95stangs

    coil springs??

    I just happen to have a set of stock springs for my car sitting around. Has anyone on here cut their stock springs to lower the car? If so how much to cut off and how did you do it? And also how much did it lower the car? Not sure if I want to do it yet but these springs are just sitting around...
  7. iluv95stangs

    MAC H-Pipe sounds funny???

    I have a mac prochamber and can also hear this noise. I have been on a few different forums and there are a lot of people that have the same noise and they say it is normal for mac. It does get aggervating though.
  8. iluv95stangs

    Fluidyne Radiator size

    The only difference should be that the auto rad has the trans cooler fittings. The fluidyne will be thicker than stock but the added thickness is on the engine side of the core support.
  9. iluv95stangs

    Can I get 20 mpg with 4.10 gears?

    Your MPG now is probably off also due to the fact that your odometer is reading incorrectly. I have 3.55's and still only get around 15 mpg in the city.
  10. iluv95stangs

    88 Tranny in My 1995 Gt

    You have two options. 1. You use the bellhousing from the 88 and you will have to trim the hole where the shifter comes through. 2. You will have to get a bellhousing and a input shaft and bearing retainer off of a 94-95 car. BTW, the 92 and up I believe are stronger than the earliers. Have...
  11. iluv95stangs

    What's the worst traffic offense you had with your Stang?

    I got a drag racing on public road and careless op with accident. I raced a 99 gt when my car was stock. Lost by 1 1/2 car lengths. 1/2 mile later saw the blue and reds. While trying to evade down a side street I managed to put my car in the ditch. Cop was real cool and didn't write me a ticket...
  12. iluv95stangs

    The 6-speed is in !!!

    The t56 has to have a reverse solenoid switch wired in. That's why it takes you both hands to get it in reverse.
  13. iluv95stangs

    Temperature Update

    What temp thermostat do you have? If it is not stock then your fan is not coming on at the correct time for the thermostat.
  14. iluv95stangs

    A/C line question, can I just fill er up?

    Were the parts you got new or used? If they were used they may have some oil in them already. If it were me I would just buy a 4oz bottle of oil and spread it out through the system. Pour a little in the compressor and then a little in the drier and a little in the condensor and so on until it...
  15. iluv95stangs

    Daytime Running Module?? I'm an idiot.

    It only came on canadian cars. Sorry I don't have a clue where it is but there is a relay for it under the hood I believe. If you look in your owners manual it should show a drl relay. Just unplug the relay and that should do it.
  16. iluv95stangs

    A/C line question, can I just fill er up?

    Be careful with the hose because it will break. All you can do is bend it in small amounts in different spots unitl it fits, or you could take it and have a custom hose made, that doesn't cost much. You will need to make sure the system has enough oil in it and then pull a vaccum on the system...
  17. iluv95stangs

    Help with codes

    check your ect sensor circuit. it may be the sensor itself or the wires going to it. make sure the wires are not pinched anywhere.
  18. iluv95stangs

    HELP ME AVOID THE TEMPTATION

    I work for a chevy dealer and we just watched our intro video to the new 05 vett and that is a load of crap. I have never even heard of anything like this from any of the big three much less chevy. I don't think there is any way that the pcm of the vehicle could even tell that it is erractic...