Search results

  1. M

    Shops

    Most shops won't install an O/R pipe for legal reasons. Someone may chime in about one, but you may want to post this to the regoinal forms. The install isn't too bad, you can do it w/ basic hand tools.
  2. M

    car jolts and bucks back and forth...drivetrain problem please help

    Does it feel like boost surge? Mine does it when it's cold, but on decel, w/ the stock vortech bypass, it's very noticable. The mini-race should take care of it, or that's what Tim at MPH told me.
  3. M

    Steeda Full Length Subframe Connectors

    The car will be a little tighter. That's just a result of less chassis flex in a turn. As far as breaking is concerned, you'll have to do a suspension to get rid of that.
  4. M

    can i do this?

    You can do the fuel pump, but the injectors will have to wait. Honestly, the injectors are probably one of the easiest things to do on the install, should only take maybe 20 min. If you decide to tap the pan ahead of time, just make sure you plug it and don't use the return fitting, as the...
  5. M

    Which Gauges with KB SC??

    IMO, the gauges you picked are exactly what I'd run. Some people run A/F, but that's worthless w/out a wideband O2. The Autometers will work w/ the KB. I'd go with whichever ones you like best. Congrats on the KB.
  6. M

    Bassani X with Mac Catback?

    Mine bolted up just fine. I had to adjust the passenger side pipe a bit, so it didn't hit the axle, but that was a 2 minute fix.
  7. M

    what is this under the light switch?

    I think that's for the rear window defroster. They moved it down by the shifter in '01 or '02.
  8. M

    time to blow her little advice

    Tim's kit is right at 4k for everything I have, plus the tune. Ironically, I don't have their kit, but pieced together everything that matches it. Had I known, it would've been a ton easier to just order it from them, plus I would've saved a few bucks, as I'm over the 4k mark w/ everything.
  9. M

    Oil pressure gauge

    As long as you're not using a S/C w/ a oil feed, you don't need one. If you look at the factory oil pressure sensor, just below it there's a plug that you can back out and put your sensor in. I'm pretty sure it's a 1/4" NPT fitting.
  10. M

    time to blow her little advice

    I agree, you can't go wrong w/ MPH. You pay a few $ more, but it's well worth it to know you're getting a good tune.
  11. M

    Gauge pod question

    Guys, Right now I've got my boot gauge in, but I haven't picked up the fuel pressure gauge. I'm looking for a cover to cover the hole where the 2nd gauge is supposed to go, as I haven't located an older fuel rail w/ a schrader valve, yet. Thanks, Dave
  12. M

    strip em or as is???

    Remove them, unless you have a buyer who wants them on the car. Most people associate a mod'd car w/ a car that's been beat on.
  13. M

    Hitting/Vibrating I think it's the Control Arms

    What are your exhaust mods, it may be the exhaust hitting the axle.
  14. M

    Ebay supercharger kits?

    I'd be cautious on any kit missing pieces. Most of the time, kits listed as complete, minus a fuel pump, or something to that extent will still be missing random bolts and what not. You may also want to keep an eye on modularpowerhouse's site, there seems to be a few S/C's go through there.
  15. M

    Pro-chamber install.....

    http://www.mustangworld.com/ourpics/fcar/hpip1.htm Make sure you have extensions and swivels for the install.
  16. M

    Will this pass? HELP!!!!

    I've gone through the inspection station in Wayne w/ aftermarket exhausts a few times, and they never said anything about sound. Actually, the inspection guy complimented me on it. You'll be fine.
  17. M

    installing an H-pipe

    Nope, just the rears.
  18. M

    Any of you with Mustang 04,with Tranny problems ?

    Mine grinds 1 > 2 and 2 > 3, 1 > 2 is only when it's really cold, 2 > 3 is pretty consistent. Car has maybe 2K miles on it.
  19. M

    Steeda Tri-X vs Stock GT Shifter

    The steeda is adjustable in height. I have mine on the low setting, and at 6'4", I have no problems w/ it. I do have to move forward to hit 5th, but that's it.
  20. M

    Is It Tough To Install Catback Yourself?

    If you only have a hacksaw, go to home depot and rent a saw. I paid $15 for 4 hours of rental, just so I didn't have to worry about it. What DTMach1 said about the jack stand location is key as well, it'll make it a lot easier to move the pipes around. Good luck.
Top Bottom
Back
Forums
Menu